[ANN][LTC][Pool][PPLNS] WeMineLTC.com | 0% FEES! | Stratum | DDoS Protection |!!

[Multifarious]

Your pool is awesome! Having much better success with you guys that coinotron.

One thing: I forgot my password, and the reset form didn't send a temp password to my email (check spam and everything). Could you help me out a bit? User name is the same as on here. If you could send a password I could use to login to the associated email address, that would help alot. Thanks.

[dragon2nd]

I haven't seen any Feathercoin pools out there with stratum+vardiff. Will you consider operating a Fethercoin pool?
Thanks.

[soundasleep]

I wish I could see how much I got paid for a block without having to cycle through 26 pages of users. And it seems I'm getting paid less per day even though I have less stales, how unusual - perhaps it's just from the difficulty increase. Otherwise, nice pool, love the stratum support for CPU miners!

[Kinetic915]

might this go to PPS soon?

[5120-01-518-6126]

MAJOR UPDATE :  We implemented 2-factor google authentication in the payout address!! Please check latest news!!

Tried to set it up on my WeMineLTC account, but after entering the code and clicking the Enable link, I get "Error Confirming Google Authenticator! Delete the Authenticator Account and Try Again!"  Is that because I already have Google Authenticator on my Google account?

[themullet]

UPDATE FIX :  Password recovery email now works Sorry for the hassle!

I didn't enter an email when register my account and I can't seem to find where to add one   

[Equality]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

[5120-01-518-6126]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

Works fine for me with cpuminer.
My stratum proxy batch file = stratum_proxy.exe -o us.wemineltc.com -p 80
My cpuminer batch file = minerd.exe -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass]

I start stratum proxy first, then the miner -- usually link up and begin mining within 30 seconds.

[Equality]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

Works fine for me with cpuminer.
My stratum proxy batch file = stratum_proxy.exe -o us.wemineltc.com -p 80
My cpuminer batch file = minerd.exe -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass]

I start stratum proxy first, then the miner -- usually link up and begin mining within 30 seconds.

i'm using cgminer with guiminer-scrypt. i've waited 5 minutes but it just never connects. the eu server connects in a few seconds.

[5120-01-518-6126]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

Works fine for me with cpuminer.
My stratum proxy batch file = stratum_proxy.exe -o us.wemineltc.com -p 80
My cpuminer batch file = minerd.exe -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass]

I start stratum proxy first, then the miner -- usually link up and begin mining within 30 seconds.

i'm using cgminer with guiminer-scrypt. i've waited 5 minutes but it just never connects. the eu server connects in a few seconds.

I've recently used cgminer on a 3x GTX480 system with the stratum proxy same as above.
My cgminer batch file = cgminer --scrypt -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass] --shaders 480 --intensity 13 --worksize 64,64,64 -g 1

Your problem might be in guiminer -- last I heard, guiminer-scrypt was still in testing

[Equality]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

Works fine for me with cpuminer.
My stratum proxy batch file = stratum_proxy.exe -o us.wemineltc.com -p 80
My cpuminer batch file = minerd.exe -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass]

I start stratum proxy first, then the miner -- usually link up and begin mining within 30 seconds.

i'm using cgminer with guiminer-scrypt. i've waited 5 minutes but it just never connects. the eu server connects in a few seconds.

I've recently used cgminer on a 3x GTX480 system with the stratum proxy same as above.
My cgminer batch file = cgminer --scrypt -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass] --shaders 480 --intensity 13 --worksize 64,64,64 -g 1

Your problem might be in guiminer -- last I heard, guiminer-scrypt was still in testing

why would you use a stratum proxy with cgminer? cgminer has built in stratum support. does the US server only work with the proxy?

[5120-01-518-6126]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

Works fine for me with cpuminer.
My stratum proxy batch file = stratum_proxy.exe -o us.wemineltc.com -p 80
My cpuminer batch file = minerd.exe -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass]

I start stratum proxy first, then the miner -- usually link up and begin mining within 30 seconds.

i'm using cgminer with guiminer-scrypt. i've waited 5 minutes but it just never connects. the eu server connects in a few seconds.

I've recently used cgminer on a 3x GTX480 system with the stratum proxy same as above.
My cgminer batch file = cgminer --scrypt -o http://127.0.0.1:8332 -u [my worker id] -p [my worker pass] --shaders 480 --intensity 13 --worksize 64,64,64 -g 1

Your problem might be in guiminer -- last I heard, guiminer-scrypt was still in testing

why would you use a stratum proxy with cgminer? cgminer has built in stratum support. does the US server only work with the proxy?

Just tried cgminer on the GTX system without the proxy running, worked ok, 240KH/s total not too bad for old Nvidia cards
Batch file = cgminer --scrypt -o us.wemineltc.com:80 -u [my worker id] -p [my worker pass] --shaders 480 --intensity 13 --worksize 64,64,64 -g 1
I'm running cgminer version 3.0.1 on Win7

[frozen]

us.wemineltc.com:80 doesn't work for me either. there isn't any error it just never connects. the eu server works fine but i'm in the US.

us.wemineltc.com:80 failed for me as well. I was getting a json auth (null) error. Switching over to eu.wemineltc.com:3333 works.

[Minas3d]

Getting constant disconnects on the US server, lost a decent amount of shares because of it.

[cbuchner1]

Just tried cgminer on the GTX system without the proxy running, worked ok, 240KH/s total not too bad for old Nvidia cards

I wrote a program called cudaminer which should get close to 200 kHash/s out of each individual GTX 480...

[mhps]

Just tried cgminer on the GTX system without the proxy running, worked ok, 240KH/s total not too bad for old Nvidia cards

I wrote a program called cudaminer which should get close to 200 kHash/s out of each individual GTX 480...

I have a question for  WeTradeCoins. I am using the Cudaminer which Christian (cbuchner1) wrote to mine LTC on weminltc.com. Cudaminer was written based on "pooler-cpuminer 2.2.3" and only supports getwork. Becuase wemneltc only supports stratum I use the stratumn-proxy.exe recommended on wemineltc.com.

Code:

stratum_proxy.exe -o us.wemineltc.com -p 80 -pa scrypt -nm

It seems that no matter I disable or enable longpoll with Cudaminer (there is a command line switch) and Cudaminer mines through stratumn-proxy just fine -- the proxy can handle it either way. My question is, if longpoll is disabled on the miner, will the stratumn-proxy (and the server at wemineltc.com) run more efficiently?

[5120-01-518-6126]

Just tried cgminer on the GTX system without the proxy running, worked ok, 240KH/s total not too bad for old Nvidia cards

I wrote a program called cudaminer which should get close to 200 kHash/s out of each individual GTX 480...

I tried cudaminer on that system, saw ~180KH/s per card, but it BSOD's after a couple of minutes -- don't think cudaminer is at fault because the 480's are old & probably have some bad procs.  Getting ready to replace them with 7870's.

[5120-01-518-6126]

I have a question for  WeTradeCoins. I am using the Cudaminer which Christian (cbuchner1) wrote to mine LTC on weminltc.com. Cudaminer was written based on "pooler-cpuminer 2.2.3" and only supports getwork. Becuase wemneltc only supports stratum I use the stratumn-proxy.exe recommended on wemineltc.com.

Code:

stratum_proxy.exe -o us.wemineltc.com -p 80 -pa scrypt -nm

It seems that no matter I disable or enable longpoll with Cudaminer (there is a command line switch) and Cudaminer mines through stratumn-proxy just fine -- the proxy can handle it either way. My question is, if longpoll is disabled on the miner, will the stratumn-proxy (and the server at wemineltc.com) run more efficiently?

Stratum servers don't use long polling -- they send broadcast messages to miners at any time.  When you use the proxy, all the overhead associated with getwork long polling is on the client side (i.e., your machine).  The difference between enabling/disabling long polling for the few ports cudaminer would open on your local system for long polling is probably no more than a few microseconds of cpu time every so often.

[WeTradeCoins]

bump

[miaviator]

I love this pool.