i have an rx480 by MSI (MSi Armor 4gb OC) and im only getting 19-21MH/s
im using the latest crimson relive 16.12.2 driver
im using stock clocks (1291mhz core, 1750 memory)
does anyone have a bios thats UEFI or information on how to flash this particular one, or what tools are needed to do so, and what needs to be adjusted to gain a higher MH/s?
any and all help is appreciated
im mining 19.4mh/s on eth
and 319 MH/s on sia
Hi to Flash your gpu BIOS you need Atiflash
For Edit your BIOS.rom you need veb7
To Export or save your orginal gpu BIOS you need gpu-z to save it! But take care when you Flash the BIOS it is possible when you do something wrong you crash the card or it dont Boot! Regards Lafu
NO DONT USE GPU-Z to save bios , use ATIFLASH to save it , because gpu-z doesnt save all blocks of bios , all you have to do is to coppy 1750 straps and put it to 1900 and 2100 , so your gpu will be something like 1150 / 2100 , also do not forget new GPU doesnt recognize moded cards , you have to do a trick to get past driver signature , after all these steps you can do something 27mh in dual mine , but i recommend you just to solo mine ether , rx 480 can do up to 29.2mhs with only 75w at gpu-z