driver relive + bios moded

[matmator]

Hello who managed to install the latest driver relive with the bios mode?

Because the driver relive blocks the gpu with bios moded

I followed a tutorial on youtube = https://www.youtube.com/watch?v=c3kDXfH6M5A

but it does not work, nobody has another solution?

thank you in advance

[1714142827]

1714142827

[1714142827]

1714142827

[ahsbqt]

well, it worked perfectly for me on windows 10 x64 and 16.12.2

[Lafu]

You have the chance to install relive or you will be asked if you want to install relive!  I have not install relive on the newest driver and all Works fine!  

[vapourminer]

why would you want to? relive drivers have (or at least had) 5-10 percent worse performance in mining than pre relive drivers.

[matmator]

I have a rig 6x rx 480, for mining only.

And I also have a pc gameur, which I have 2 rx 480.

And for games it is important to play with the latest driver released to optimize the latest games released.

But from what I read on various forums, the last driver relive detects when a bios and modified, and the installation of the driver hangs,

I moded my bios to optimize the hashrate, but I can no longer install the drivers relive, I'm staying on the 16.10.3

How did you do to install the relive driver with modified bios?

[Lafu]

I have a rig 6x rx 480, for mining only.

And I also have a pc gameur, which I have 2 rx 480.

And for games it is important to play with the latest driver released to optimize the latest games released.

But from what I read on various forums, the last driver relive detects when a bios and modified, and the installation of the driver hangs,

I moded my bios to optimize the hashrate, but I can no longer install the drivers relive, I'm staying on the 16.10.3

How did you do to install the relive driver with modified bios?

When i install the driver Complete it will ask if i would install relive or not  and i dont install so i have no problems  !

[ManyMan]

I have a rig 6x rx 480, for mining only.

And I also have a pc gameur, which I have 2 rx 480.

And for games it is important to play with the latest driver released to optimize the latest games released.

But from what I read on various forums, the last driver relive detects when a bios and modified, and the installation of the driver hangs,

I moded my bios to optimize the hashrate, but I can no longer install the drivers relive, I'm staying on the 16.10.3

How did you do to install the relive driver with modified bios?

Can you provide some proof?

[ahsbqt]

Well, i am using the latest 17.1.1 on windows 10 on a rig with moddifieds rx470 from sapphire, nice gain 0.5mhs on eth, just intall it your card will have the yellow mark, run the pixel patch 1.4.4, and restart, that's it you are done, running nice an easy with watttool

[matmator]

i instal last driver = black screen

[ahsbqt]

Did you reset wattman and watttool before installing?, this its usually required to avoid problems