macro names must be identifiers

[ironsniper]

hey all i am trying to compile a wallet on linux and am almost done but i am getting the following error

Code:

<command-line>:0:1: error: macro names must be identifiers
In file included from release/qrc_bitcoin.cpp:9:0:
release/qrc_bitcoin.cpp:86588:44: warning: 'qInitResources_bitcoin__init_variable__' defined but not used [-Wunused-variable]
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
                                           ^
../mxe/usr/i686-w64-mingw32.static/qt/include/QtCore/qglobal.h:941:21: note: in definition of macro 'Q_CONSTRUCTOR_FUNCTION0'
   static const int AFUNC ## __init_variable__ = AFUNC();
                    ^
release/qrc_bitcoin.cpp:86588:1: note: in expansion of macro 'Q_CONSTRUCTOR_FUNCTION'
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
^
release/qrc_bitcoin.cpp:86588:24: note: in expansion of macro 'QT_MANGLE_NAMESPACE'
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
                       ^
Makefile.Release:1987: recipe for target 'build/qrc_bitcoin.o' failed
make: *** [build/qrc_bitcoin.o] Error 1

[jackg]

hey all i am trying to compile a wallet on linux and am almost done but i am getting the following error

Code:

<command-line>:0:1: error: macro names must be identifiers
In file included from release/qrc_bitcoin.cpp:9:0:
release/qrc_bitcoin.cpp:86588:44: warning: 'qInitResources_bitcoin__init_variable__' defined but not used [-Wunused-variable]
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
                                           ^
../mxe/usr/i686-w64-mingw32.static/qt/include/QtCore/qglobal.h:941:21: note: in definition of macro 'Q_CONSTRUCTOR_FUNCTION0'
   static const int AFUNC ## __init_variable__ = AFUNC();
                    ^
release/qrc_bitcoin.cpp:86588:1: note: in expansion of macro 'Q_CONSTRUCTOR_FUNCTION'
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
^
release/qrc_bitcoin.cpp:86588:24: note: in expansion of macro 'QT_MANGLE_NAMESPACE'
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
                       ^
Makefile.Release:1987: recipe for target 'build/qrc_bitcoin.o' failed
make: *** [build/qrc_bitcoin.o] Error 1

1. Are you running the setup under the "sudo" commands. (If not then type su-- on the command line and then try again). Ignore this step if you're using a version that doesn't require super-user access to be an administrator -such as if it is being done by default.
2. Check that you downloaded the file correctly. Re-download it and build it again.

Also, what command did you run to get that error? or was that just in building it.
If it was in the build, I think the wallet first creates the "debug.log" if you could navigate to that (in the "bitcoin" directory and can post it here that might add a greater insight).

[ironsniper]

hey all i am trying to compile a wallet on linux and am almost done but i am getting the following error

Code:

<command-line>:0:1: error: macro names must be identifiers
In file included from release/qrc_bitcoin.cpp:9:0:
release/qrc_bitcoin.cpp:86588:44: warning: 'qInitResources_bitcoin__init_variable__' defined but not used [-Wunused-variable]
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
                                           ^
../mxe/usr/i686-w64-mingw32.static/qt/include/QtCore/qglobal.h:941:21: note: in definition of macro 'Q_CONSTRUCTOR_FUNCTION0'
   static const int AFUNC ## __init_variable__ = AFUNC();
                    ^
release/qrc_bitcoin.cpp:86588:1: note: in expansion of macro 'Q_CONSTRUCTOR_FUNCTION'
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
^
release/qrc_bitcoin.cpp:86588:24: note: in expansion of macro 'QT_MANGLE_NAMESPACE'
Q_CONSTRUCTOR_FUNCTION(QT_MANGLE_NAMESPACE(qInitResources_bitcoin))
                       ^
Makefile.Release:1987: recipe for target 'build/qrc_bitcoin.o' failed
make: *** [build/qrc_bitcoin.o] Error 1

1. Are you running the setup under the "sudo" commands. (If not then type su-- on the command line and then try again). Ignore this step if you're using a version that doesn't require super-user access to be an administrator -such as if it is being done by default.
2. Check that you downloaded the file correctly. Re-download it and build it again.

Also, what command did you run to get that error? or was that just in building it.
If it was in the build, I think the wallet first creates the "debug.log" if you could navigate to that (in the "bitcoin" directory and can post it here that might add a greater insight).

tried with sudo and su didnt work also does the debug.log ever go by a different name? as i cannot find a file by that name

[achow101]

Also, what command did you run to get that error? or was that just in building it.
If it was in the build, I think the wallet first creates the "debug.log" if you could navigate to that (in the "bitcoin" directory and can post it here that might add a greater insight).

tried with sudo and su didnt work also does the debug.log ever go by a different name? as i cannot find a file by that name

This looks like an error created during compiling. The debug.log is not created until the software is compiled and then run.

What commands have you done to get to this? What software are you building? What version of that software?

[ironsniper]

Also, what command did you run to get that error? or was that just in building it.
If it was in the build, I think the wallet first creates the "debug.log" if you could navigate to that (in the "bitcoin" directory and can post it here that might add a greater insight).

tried with sudo and su didnt work also does the debug.log ever go by a different name? as i cannot find a file by that name

This looks like an error created during compiling. The debug.log is not created until the software is compiled and then run.

What commands have you done to get to this? What software are you building? What version of that software?

cross compile on ubuntu linux with mxe, i managed to compile one wallet and am trying a different one now and it is qt4

[cr1776]

Also, what command did you run to get that error? or was that just in building it.
If it was in the build, I think the wallet first creates the "debug.log" if you could navigate to that (in the "bitcoin" directory and can post it here that might add a greater insight).

tried with sudo and su didnt work also does the debug.log ever go by a different name? as i cannot find a file by that name

This looks like an error created during compiling. The debug.log is not created until the software is compiled and then run.

What commands have you done to get to this? What software are you building? What version of that software?

cross compile on ubuntu linux with mxe, i managed to compile one wallet and am trying a different one now and it is qt4

Which different wallet is this?  What command did you use to do so?

[ironsniper]

Also, what command did you run to get that error? or was that just in building it.
If it was in the build, I think the wallet first creates the "debug.log" if you could navigate to that (in the "bitcoin" directory and can post it here that might add a greater insight).

tried with sudo and su didnt work also does the debug.log ever go by a different name? as i cannot find a file by that name

This looks like an error created during compiling. The debug.log is not created until the software is compiled and then run.

What commands have you done to get to this? What software are you building? What version of that software?

cross compile on ubuntu linux with mxe, i managed to compile one wallet and am trying a different one now and it is qt4

Which different wallet is this?  What command did you use to do so?

Code:

#!/bin/bash

LOCATION=/home/compile/compiler
PATH=$LOCATION/mxe/usr/bin:$PATH
MXE_INCLUDE_PATH=$LOCATION/mxe/usr/i686-w64-mingw32.static/include
MXE_LIB_PATH=$LOCATION/mxe/usr/i686-w64-mingw32.static/lib

/home/compile/compiler/mxe/usr/bin/i686-w64-mingw32.static-qmake-qt4 \
	BOOST_LIB_SUFFIX=-mt \
	BOOST_THREAD_LIB_SUFFIX=_win32-mt \
	BOOST_INCLUDE_PATH=$MXE_INCLUDE_PATH/boost \
	BOOST_LIB_PATH=$MXE_LIB_PATH \
	OPENSSL_INCLUDE_PATH=$MXE_INCLUDE_PATH/openssl \
	OPENSSL_LIB_PATH=$MXE_LIB_PATH \
	BDB_INCLUDE_PATH=$MXE_INCLUDE_PATH \
	BDB_LIB_PATH=$MXE_LIB_PATH \
	MINIUPNPC_INCLUDE_PATH=$MXE_INCLUDE_PATH \
	MINIUPNPC_LIB_PATH=$MXE_LIB_PATH \
	QMAKE_LRELEASE=$LOCATION/mxe/usr/i686-w64-mingw32.static/qt/bin/lrelease altcoin-qt.pro

make -f Makefile.Release

custom script all i do is put in the correct info