[ANN][LTC][BTC][NMC][Pool][PPLNS] - P2Pool.org - P2Pool Multi-Mining Pool

[Jude Austin]

And to be honest, who ever runs http://p2poolmining.com/

Stole my design and my setup.

[1715333837]

1715333837

[1715333837]

1715333837

[eroxors]

Why is your site identical to this one? https://bitcointalk.org/index.php?topic=174493.0

Where are your servers located?

Hello.

To be honest, I have never seen p2pmining.com until recently when he shut it down.

I messaged him to get the source at one point so that I can payout NMC merged mining but he never responded.

My dedicated is located in Santa Clara, California.

Well he's back (Jaycoin). If you could figure out NMC and Devcoin merged mining, I'd be happy to switch over to your pool.

Sorry to hear about your service getting ripped off, hopefully they will take it down/do their own thing.

[Jude Austin]

Why is your site identical to this one? https://bitcointalk.org/index.php?topic=174493.0

Where are your servers located?

Hello.

To be honest, I have never seen p2pmining.com until recently when he shut it down.

I messaged him to get the source at one point so that I can payout NMC merged mining but he never responded.

My dedicated is located in Santa Clara, California.

Well he's back (Jaycoin). If you could figure out NMC and Devcoin merged mining, I'd be happy to switch over to your pool.

Sorry to hear about your service getting ripped off, hopefully they will take it down/do their own thing.

No big deal.

I need to figure out how to payout NMC and other merged coins then I will add them.

[Jude Austin]

Another update!

I noticed a lot lately that Bitcoin mining has been very unstable due to a configuration error.

Thanks to Eleuthria of BTCGuild he showed me a solution that should correct the issue.

Thank you to everyone who mines at P2Pool.org!

If there is anything I can do please let me know!

Have a good one!

[kllr123]

Hi, is there a chance you can add stratum support? And if you already have, how do I connect to stratum proxy?

[Jude Austin]

Hi, is there a chance you can add stratum support? And if you already have, how do I connect to stratum proxy?

P2Pool.org already supports stratum mining.

Simply point your miners to p2pool.org:9332 and it should detect stratum.

If not come back here and I will help further.

[zvs]

Hi, is there a chance you can add stratum support? And if you already have, how do I connect to stratum proxy?

stratum appears to have some issues w/ p2pool atm.  i know that mine reponds much slower than the long polling to new work.   toggling the fix-protocol option in cgminer dropped my DOA from about 10% to 5% (180ms latency)

i guess you could test it yourself by running concurrent instances of some stratum miner + non-stratum miner.  maybe it doesnt happen to everyone

[Jude Austin]

Currently having issues with Freicoin on P2Pool.org.

Working on resolving the issue.

Sorry for the down time.

*RESOLVED!*

[jmfg187]

I have been mining on your feathercoin pool for almost 24 hours without 1 single payout. Any idea what is going on? I will switch to somewhere else until I figure out how much time and energy was wasted while I was not home.

[Jude Austin]

I have been mining on your feathercoin pool for almost 24 hours without 1 single payout. Any idea what is going on? I will switch to somewhere else until I figure out how much time and energy was wasted while I was not home.

I believe there is an issue with Feathercoin at the moment.

I have updated the client for the new upcoming fork already.

I have no control over payments at all.

I believe the issue is because Feathercoins blockchain has stopped or is really slow.

I am very sorry for this issue.

[nybbler905]

Spent a few days with GUIMiner pointed at http://p2pool.org:9322 with wallet 1NgUiySXubVYrYQiRKbrP2QFMRijMCdt4Z
miner showed alot of shares, nada showing up in the payouts tab. The Stats tab kept changing the shares ( increasing ) and the number in the brackets would go up and down ( assume last good shares that count at payout ).  I am still having issues with the Terracoin-qt wallet NOT getting any blocks, let alone getting close to updates.

I also have been having the same issue with LTC mining using MinerD.exe, LiteCoin-QT wallet mining and a few other miners showing i've sent shares and nada showing up in either my wallet or the payments tab. LS7FEfu9ajp3NQcDjui9TSKscwQesj9i8k

http://p2pool.org/ltcstats.php?address=LS7FEfu9ajp3NQcDjui9TSKscwQesj9i8k opens a nice new window....

example of what i see ( as the hash rate varies only, the rest is exactly cut and pasted )


Pool statistics
Hashrate:    21.197 Mh/s
Your Hashrate:    0 Kh/s
Your Current Payout:    LTC

Exchange LTC @ Vircurex.com

WHAT am I doing wrong?

[EDIT]

set up CGMINER and changed the recomended setting to 0 and still get the following for the Terracoin mining


[2013-05-27 21:12:57] Stratum from pool 0 requested work restart
[2013-05-27 21:13:05] Stratum from pool 0 requested work restart
[2013-05-27 21:13:20] Stratum from pool 0 requested work restart


[2013-05-27 21:13:37] Accepted 42bf140a Diff 3/1 GPU 1 pool 0

[2013-05-27 21:18:05] Accepted 74c10ee3 Diff 2/1 GPU 1 pool 0

[nybbler905]

over 24 hours mining Terracoin, lots of shares went in to the pool, and NADA on my end, no show for payouts ( payouts page seems ' stuck ' on the same group of people ) and, of course, my Terracoin wallet is once again behind and not updating.... going from 0 to max of 2 connections before it's back to 0 and no downloading blocks.

Litecoin-qt is up to date, and NADA for the blocks i've found there either.  ZIP for mining, only the 1 transaction from a LTC faucet that took a week to get me a grand total of 0.01003999 LTC

One of the most fustrating parts of the Q/A page is there is no real info to check that the settings i'm using are actually connecting and count AT the pool, when there is a submitted block, it either sticks to the last hash rate from pre-submit or randomly checks until 30 min is up and a PPLS pool would have stuck it in the list to be payed later. At that point, http://p2pool.org/trcstats.php?address=1NgUiySXubVYrYQiRKbrP2QFMRijMCdt4Z gets back to showing no payout pending or otherwise, and my speed back to blank.

My Trust in this pool is now at (rounded to nearest full number, MINUS 5 ) between the obvious connection at my end, the obvious at my end submission of shares and the not verry obvious i'll ever be paid for the mining from the site.

[Jude Austin]

If you are using an address from an exchange then you will never see payout.

I have it clearly stating on the site do NOT use exchange addresses.

The way most exchanges have it setup they do not recognize generated payments or mined transactions.

So that could be the issue on why you haven't seen a payment.

You need to use the address from the client on your computer to receive these payments.

Another thing is that you get paid per last number of shares submitted.

Say you submit 600 shares on the current block, well, you won't receive payment for that until a new block is started.

So if the coin you are mining is still on the same block, that could be the issue also.

I have no control over payments, P2Pool handles all of that on it's own.

Sorry that you feel like you can't trust my pool, honestly, there isn't much I have control over other then setting a few things in terms of configuration.

[nybbler905]

If you are using an address from an exchange then you will never see payout.

I have it clearly stating on the site do NOT use exchange addresses.

The way most exchanges have it setup they do not recognize generated payments or mined transactions.

So that could be the issue on why you haven't seen a payment.

You need to use the address from the client on your computer to receive these payments.

Another thing is that you get paid per last number of shares submitted.

Say you submit 600 shares on the current block, well, you won't receive payment for that until a new block is started.

So if the coin you are mining is still on the same block, that could be the issue also.

I have no control over payments, P2Pool handles all of that on it's own.

Sorry that you feel like you can't trust my pool, honestly, there isn't much I have control over other then setting a few things in terms of configuration.

the -QT for my Litecoin and Terracoin wallets means they are not ' exchange ' wallets, they are on my system.

My Litecoin wallet ( litecoin-QT ) shows no mined anything and I am still having issues getting Terracoin-QT to sync with the network.


After several hours of mining and refreshing from the P2Pool.org page for Terracoins, the ' last blocks ' page updated showing that tere was new blocks so what you say means that the found shares should have been paid out.... and my address should have shown in the paidout tab as well...
it should also have something show in the http://p2pool.org/trcstats.php?address=1NgUiySXubVYrYQiRKbrP2QFMRijMCdt4Z
 and not just show "
Mining Stats
Hashrate:    9.233 Gh/s
Your Hashrate:    0 Gh/s
Your Current Payout:    TRC

Exchange TRC @ Vircurex.com "

So, what settings do I need for GUIMiner to actually show and me get paid to mine at P2Pool.org?  Is there some p2pool software I should HAVE on my end to allow me to get paid?  To have it show THAT the shares I sent in ARE counting?  GUIMiner said over 14 shares for Terracoin and I have yet to see my Terracoin-QT address show in the payments tab or even online for my address to show transactions ( including mining ) of anything past the ONE faucet transaction that got me in to this alt coin.


[EDIT] just counted how many ' last blocks ' are on http://p2pool.org:9322/static/ and it's 10 PAST when I stopped LTC mining, my litecoin-qt wallet is up to date, using the transactions view, drop down selected to all, I see my transactions and there are no mining, setting to mined it shows blank.  Last Block at this time is
 136156   Tue May 28 2013 12:39:12 GMT-0800 (Pacific Standard Time)   000000000000e5861193d7bb69912823723e262b48b100d042a0e7c916c80165

last block before i turned off the miner was one of these 2

135711   Mon May 27 2013 19:39:42 GMT-0800 (Pacific Standard Time)   000000000001c33936ed86a36e29ce086d19f9b9d8b68515c436e5ad1d6b07cf   .
135593   Mon May 27 2013 15:33:57 GMT-0800 (Pacific Standard Time)   000000000001df95e414c2eb135f5fb5360d08b388059b399230d6cd75480ac9

For the 2 Terracoin shares in my previous post ( copied from CGMiner and pasted in to the post ) they fall around this block that I didn't get paid for and the post SHOWS the full CGminer line to show that they were from me

135835   Mon May 27 2013 23:43:20 GMT-0800 (Pacific Standard Time)   000000000000859111063c1e1f75d3bb90a01a9a489fb57a536524693d2b50c1

[Jude Austin]

If you are using an address from an exchange then you will never see payout.

I have it clearly stating on the site do NOT use exchange addresses.

The way most exchanges have it setup they do not recognize generated payments or mined transactions.

So that could be the issue on why you haven't seen a payment.

You need to use the address from the client on your computer to receive these payments.

Another thing is that you get paid per last number of shares submitted.

Say you submit 600 shares on the current block, well, you won't receive payment for that until a new block is started.

So if the coin you are mining is still on the same block, that could be the issue also.

I have no control over payments, P2Pool handles all of that on it's own.

Sorry that you feel like you can't trust my pool, honestly, there isn't much I have control over other then setting a few things in terms of configuration.

the -QT for my Litecoin and Terracoin wallets means they are not ' exchange ' wallets, they are on my system.

My Litecoin wallet ( litecoin-QT ) shows no mined anything and I am still having issues getting Terracoin-QT to sync with the network.


After several hours of mining and refreshing from the P2Pool.org page for Terracoins, the ' last blocks ' page updated showing that tere was new blocks so what you say means that the found shares should have been paid out.... and my address should have shown in the paidout tab as well...
it should also have something show in the http://p2pool.org/trcstats.php?address=1NgUiySXubVYrYQiRKbrP2QFMRijMCdt4Z
 and not just show "
Mining Stats
Hashrate:    9.233 Gh/s
Your Hashrate:    0 Gh/s
Your Current Payout:    TRC

Exchange TRC @ Vircurex.com "

So, what settings do I need for GUIMiner to actually show and me get paid to mine at P2Pool.org?  Is there some p2pool software I should HAVE on my end to allow me to get paid?  To have it show THAT the shares I sent in ARE counting?  GUIMiner said over 14 shares for Terracoin and I have yet to see my Terracoin-QT address show in the payments tab or even online for my address to show transactions ( including mining ) of anything past the ONE faucet transaction that got me in to this alt coin.


[EDIT] just counted how many ' last blocks ' are on http://p2pool.org:9322/static/ and it's 10 PAST when I stopped LTC mining, my litecoin-qt wallet is up to date, using the transactions view, drop down selected to all, I see my transactions and there are no mining, setting to mined it shows blank.  Last Block at this time is
 136156   Tue May 28 2013 12:39:12 GMT-0800 (Pacific Standard Time)   000000000000e5861193d7bb69912823723e262b48b100d042a0e7c916c80165

last block before i turned off the miner was one of these 2

135711   Mon May 27 2013 19:39:42 GMT-0800 (Pacific Standard Time)   000000000001c33936ed86a36e29ce086d19f9b9d8b68515c436e5ad1d6b07cf   .
135593   Mon May 27 2013 15:33:57 GMT-0800 (Pacific Standard Time)   000000000001df95e414c2eb135f5fb5360d08b388059b399230d6cd75480ac9

What is your entire setup?

Are you using the proper algorithm for the coin?

Are you running Scrypt for Litecoin?

SHA-256 for Terracoin?

Are you using the proper ports for the coin?

Litecoin mining should be set to http://p2pool.org:9327

Terracoin mining should be set to http://p2pool.org:9322

What does GUIMiner say your hash rate is?

You are using the address as the username when connecting with GUIMiner?

If your hash rate is low that also can account for not seeing payment, if you aren't using a GPU to mine your best bet would be to find a pay per share pool.

Sorry I mentioned the exchange I just saw from your last post Vircurex in there.

[nybbler905]

set up CGMINER and changed the recomended setting to 0 and still get the following for the Terracoin mining


[2013-05-27 21:12:57] Stratum from pool 0 requested work restart
[2013-05-27 21:13:05] Stratum from pool 0 requested work restart
[2013-05-27 21:13:20] Stratum from pool 0 requested work restart


[2013-05-27 21:13:37] Accepted 42bf140a Diff 3/1 GPU 1 pool 0

[2013-05-27 21:18:05] Accepted 74c10ee3 Diff 2/1 GPU 1 pool 0

THESE 2 SHARES AND NO PAYMENT!!!!

[EDIT]

Litecoin - MinerD -"C:\Program Files\Litecoin\miner\minerd.exe"  -r 1 -t 1  --scrypt -o http://ltc.kattare.com:9332 -U nybbler905.1:x

Terracoin - GUIMiner - no extra settings - host:p2pool.org   port:9322 username 1NgUiySXubVYrYQiRKbrP2QFMRijMCdt4Z

[2nd Edit] copy/pasted from the wrong minerd the only difference is the -o http://p2pool.org:9327 -U LS7FEfu9ajp3NQcDjui9TSKscwQesj9i8k

[Jude Austin]

set up CGMINER and changed the recomended setting to 0 and still get the following for the Terracoin mining


[2013-05-27 21:12:57] Stratum from pool 0 requested work restart
[2013-05-27 21:13:05] Stratum from pool 0 requested work restart
[2013-05-27 21:13:20] Stratum from pool 0 requested work restart


[2013-05-27 21:13:37] Accepted 42bf140a Diff 3/1 GPU 1 pool 0

[2013-05-27 21:18:05] Accepted 74c10ee3 Diff 2/1 GPU 1 pool 0

THESE 2 SHARES AND NO PAYMENT!!!!

Like I said, switch to a pool that is pay per share.

Simple as that.

[nybbler905]

set up CGMINER and changed the recomended setting to 0 and still get the following for the Terracoin mining


[2013-05-27 21:12:57] Stratum from pool 0 requested work restart
[2013-05-27 21:13:05] Stratum from pool 0 requested work restart
[2013-05-27 21:13:20] Stratum from pool 0 requested work restart


[2013-05-27 21:13:37] Accepted 42bf140a Diff 3/1 GPU 1 pool 0

[2013-05-27 21:18:05] Accepted 74c10ee3 Diff 2/1 GPU 1 pool 0

THESE 2 SHARES AND NO PAYMENT!!!!

Like I said, switch to a pool that is pay per share.

Simple as that.

so, in plain English ' thank you for making me rich due to your low hash rate, you get squat for your time '

[Jude Austin]

set up CGMINER and changed the recomended setting to 0 and still get the following for the Terracoin mining


[2013-05-27 21:12:57] Stratum from pool 0 requested work restart
[2013-05-27 21:13:05] Stratum from pool 0 requested work restart
[2013-05-27 21:13:20] Stratum from pool 0 requested work restart


[2013-05-27 21:13:37] Accepted 42bf140a Diff 3/1 GPU 1 pool 0

[2013-05-27 21:18:05] Accepted 74c10ee3 Diff 2/1 GPU 1 pool 0

THESE 2 SHARES AND NO PAYMENT!!!!

Like I said, switch to a pool that is pay per share.

Simple as that.

so, in plain English ' thank you for making me rich due to your low hash rate, you get squat for your time '

You made me rich, how?

If you didn't generate enough in shares to get paid out, then I would get 2% of that.

So you do the math 2% of 0 = what?

Just because you are not capable of setting your gear up properly doesn't make me a thief.

I am telling you in plain English to go to some other "trustworthy" pool since mine is -5 on your trust scale.

That's all.

[nybbler905]

set up CGMINER and changed the recomended setting to 0 and still get the following for the Terracoin mining


[2013-05-27 21:12:57] Stratum from pool 0 requested work restart
[2013-05-27 21:13:05] Stratum from pool 0 requested work restart
[2013-05-27 21:13:20] Stratum from pool 0 requested work restart


[2013-05-27 21:13:37] Accepted 42bf140a Diff 3/1 GPU 1 pool 0

[2013-05-27 21:18:05] Accepted 74c10ee3 Diff 2/1 GPU 1 pool 0

THESE 2 SHARES AND NO PAYMENT!!!!

Like I said, switch to a pool that is pay per share.

Simple as that.

so, in plain English ' thank you for making me rich due to your low hash rate, you get squat for your time '

You made me rich, how?

If you didn't generate enough in shares to get paid out, then I would get 2% of that.

So you do the math 2% of 0 = what?

Just because you are not capable of setting your gear up properly doesn't make me a thief.

I am telling you in plain English to go to some other "trustworthy" pool since mine is -5 on your trust scale.

That's all.

and your assistance in getting my system set up ' properly ' so that shares counted to me getting something so you get your 2% and not 100% has been of great assistance.   The mining of Terracoins as a good example, I left that overnight using GUIMiner on exactly what your page said to set ' your favorite miner ' and... nada.... used your pages settings for cg miner and again nada
No mention of any ' extra software ' or ' due to the over 1gHash/sec for Terracoins there is a chance ya get nada.  40 hours of mining with an average of 6MHash/sec gone to waste as far as I can tell from your payouts.

I highly recomend editing your FAQ section to include more information on ' how to set up your equipment '