NEED PCB DESIGNER

[papamoi]

hi guys,

as you should know since i m posting that i m seeking to make my own hardware.

right now i m studying two directions:

1 with asic ,it s a long way to achieve anything with a big upfront cost

2 with fgpa,but with better chips than spartan6


in both cases, i ll need someone to design the pcb and for fgpa i ll need someone to implement the opensource model to more fast chips.

so if there is anyone interested and have ability to help in these projects,please pm me

thanks

[1714797906]

1714797906

[zulunation]

IMHO for the second direction there is no need to design PCB.
There are evaluation boards.

[shibaji]

I am not a PCB designer, but if you need partner for Verilog/SV/VHDL or Simulation/Synthesis/Verification let me know (C/C++ as well on Linux)

[🏰 TradeFortress 🏰]

Hi Thomas.

[baad]

IMHO for the second direction there is no need to design PCB.
There are evaluation boards.

The eval boards contains lots of unneccesary parts and the cost is high.

[Frizz23]

hi guys,

as you should know since i m posting that i m seeking to make my own hardware.

right now i m studying two directions:

1 with asic ,it s a long way to achieve anything with a big upfront cost
...

papamoi? ... is this you Josh? 

[papamoi]

ok guy

people who are interested please pm me with your contacts details,email skype etc so we can start somewhere

thanks

[papamoi]

Hi Thomas.

yes?

[papamoi]

IMHO for the second direction there is no need to design PCB.
There are evaluation boards.

i want to have if possible multiple fgpa in one pcb or multiple asic in the same

[papamoi]

hi guys

there is one or two time waster who contacted me to sell their stuffs

i m repeating to make it clear:

if i need a PCB designer that s mean i don t need a pcb board to be sold
if you have built already a pcb board or a fgpa miner i m  interested in you, i want manpower not boards

i hope that s clear

thanks

[phk]

there is one or two time waster who contacted me to sell their stuffs

i m repeating to make it clear:

if i need a PCB designer that s mean i don t need a pcb board to be sold
if you have built already a pcb board or a fgpa miner i m  interested in you, i want manpower not boards

i hope that s clear

thanks

Try contacting directly via PM the people on this board who have already demonstrated the skills you seek (fpgaminer, ngzhang, others...).

Or, try to directly contact one of the board manufacturers (e.g. ZTEX) and get them to design the boards for you on a consulting basis such that you own the design.

Finally, you could attempt to find some design consultants local to you using traditional methods.

[papamoi]

there is one or two time waster who contacted me to sell their stuffs

i m repeating to make it clear:

if i need a PCB designer that s mean i don t need a pcb board to be sold
if you have built already a pcb board or a fgpa miner i m  interested in you, i want manpower not boards

i hope that s clear

thanks

Try contacting directly via PM the people on this board who have already demonstrated the skills you seek (fpgaminer, ngzhang, others...).

Or, try to directly contact one of the board manufacturers (e.g. ZTEX) and get them to design the boards for you on a consulting basis such that you own the design.

Finally, you could attempt to find some design consultants local to you using traditional methods.

let me explain you what is needed and who i ve contacted already:

1/fgpaminer and ngzhang seems to be busy with other projects

2/your second solution could be doable

3/i ve already try this,half of them doesnt know what is btc and i m waisting time trying to explain them

one of them (got him an hour ago)said  btc is a scam


so this is where i am right now

so if still there is people who are willing to help on this ,we need skills and i don t want to buy any boards because the one i m seeking for doesnt exist

thanks

[phk]

1/fgpaminer and ngzhang seems to be busy with other projects

Are they really too busy, or are they only busy enough to have understood your idea and lost interest because they didn't think it had merit / compensation wasn't right?

3/i ve already try this,half of them doesnt know what is btc and i m waisting time trying to explain them

one of them (got him an hour ago)said  btc is a scam

My suggestion is leave BTC out of the discussion.  There is nothing BTC unique about any of these designs.  They are all very simple generic FPGA's with no fancy I/O or anything.

Draw a block diagram and make them quote it for you.

If you need help selecting the best FPGA to include in your block diagram, you probably just need to point them at the open source miner project and get them to evaluate your options for you (cost vs. density vs. power).

[papamoi]

ok thank you for your suggestion

[shibaji]

ok thank you for your suggestion

Above suggestion is true, just do not mention btc - most people will not understand, and they do not need to. Depending on btc or ltc, it is double-SHA256 or scrypt, and that's about it (ltc needs RAM too).

[alexuk]

hi guys,

as you should know since i m posting that i m seeking to make my own hardware.

right now i m studying two directions:

1 with asic ,it s a long way to achieve anything with a big upfront cost
...

papamoi? ... is this you Josh? 

LOL this.

[aTg]

hi guys,
as you should know since i m posting that i m seeking to make my own hardware.
right now i m studying two directions:
1 with asic ,it s a long way to achieve anything with a big upfront cost
2 with fgpa,but with better chips than spartan6
in both cases, i ll need someone to design the pcb and for fgpa i ll need someone to implement the opensource model to more fast chips.
so if there is anyone interested and have ability to help in these projects,please pm me
thanks

A truly pathetic post.

[papamoi]

hi guys,
as you should know since i m posting that i m seeking to make my own hardware.
right now i m studying two directions:
1 with asic ,it s a long way to achieve anything with a big upfront cost
2 with fgpa,but with better chips than spartan6
in both cases, i ll need someone to design the pcb and for fgpa i ll need someone to implement the opensource model to more fast chips.
so if there is anyone interested and have ability to help in these projects,please pm me
thanks

A truly pathetic post.

really?

are you frustrated of your own life?

if this is the case,take your boredom somewhere else,here i m trying to find a solution

thanks

[aTg]

hi guys,
as you should know since i m posting that i m seeking to make my own hardware.
right now i m studying two directions:
1 with asic ,it s a long way to achieve anything with a big upfront cost
2 with fgpa,but with better chips than spartan6
in both cases, i ll need someone to design the pcb and for fgpa i ll need someone to implement the opensource model to more fast chips.
so if there is anyone interested and have ability to help in these projects,please pm me
thanks

A truly pathetic post.

really?

are you frustrated of your own life?

if this is the case,take your boredom somewhere else,here i m trying to find a solution

thanks

You say to want to make your own hardware, but are looking for people who will design it all, so why should not they do it themselves for their own benefit and not yours?
That is to copy the business model of BFL.

[papamoi]

hi guys,
as you should know since i m posting that i m seeking to make my own hardware.
right now i m studying two directions:
1 with asic ,it s a long way to achieve anything with a big upfront cost
2 with fgpa,but with better chips than spartan6
in both cases, i ll need someone to design the pcb and for fgpa i ll need someone to implement the opensource model to more fast chips.
so if there is anyone interested and have ability to help in these projects,please pm me
thanks

A truly pathetic post.

really?

are you frustrated of your own life?

if this is the case,take your boredom somewhere else,here i m trying to find a solution

thanks

You say to want to make your own hardware, but are looking for people who will design it all, so why should not they do it themselves for their own benefit and not yours?
That is to copy the business model of BFL.

really?

do you know to read?
where i ve said that i wanted to sell them?
stop trolling around and talking non sense when you don t know what are you talking about

so if i want to build a device for me i should have all the skills in one to make it?

wich planet are you living in?

stop wasting my times and yours

we are all busy people and i m busy finding a solution for my issues,stop wasting my time

that would be great

thanks
in short ,get a life