Theneogeo (OP)
|
|
January 30, 2017, 10:35:40 PM |
|
I has recently sold my setup and the gentleman that bought it has blown either 3 or 4 boards within 2 weeks... he said all in the same spot!!!! ( you can see the damage) the setup is as follows Asrock h81 pro btc ax1200 g1840 cpu 8gb ram 80gb ssd Gigabyte r9380 4gb cards non powered risers. I had been runing this setup for over 6 months with no issues. Any ideas as to why he keeps blowing them? http://imgur.com/v9BLWGv
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
January 30, 2017, 10:40:21 PM |
|
I has recently sold my setup and the gentleman that bought it has blown either 3 or 4 boards within 2 weeks... he said all in the same spot!!!! ( you can see the damage) the setup is as follows Asrock h81 pro btc ax1200 g1840 cpu 8gb ram 80gb ssd Gigabyte r9380 4gb cards non powered risers.
I had been runing this setup for over 6 months with no issues. Any ideas as to why he keeps blowing them? http://imgur.com/v9BLWGvThat's a weird spot to burn out but I'm just going to blindly say that your problem is probably coming from the risers. Use powered USB risers so the cards pull power straight from the PSU and not from the motherboard.
|
Not your keys, not your coins!
|
|
|
Theneogeo (OP)
|
|
January 30, 2017, 10:45:31 PM |
|
I has recently sold my setup and the gentleman that bought it has blown either 3 or 4 boards within 2 weeks... he said all in the same spot!!!! ( you can see the damage) the setup is as follows Asrock h81 pro btc ax1200 g1840 cpu 8gb ram 80gb ssd Gigabyte r9380 4gb cards non powered risers.
I had been runing this setup for over 6 months with no issues. Any ideas as to why he keeps blowing them? http://imgur.com/v9BLWGvThat's a weird spot to burn out but I'm just going to blindly say that your problem is probably coming from the risers. Use powered USB risers so the cards pull power straight from the PSU and not from the motherboard. See I thought soo too, but I used it for months with no issues like that
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
January 30, 2017, 10:50:49 PM |
|
I has recently sold my setup and the gentleman that bought it has blown either 3 or 4 boards within 2 weeks... he said all in the same spot!!!! ( you can see the damage) the setup is as follows Asrock h81 pro btc ax1200 g1840 cpu 8gb ram 80gb ssd Gigabyte r9380 4gb cards non powered risers.
I had been runing this setup for over 6 months with no issues. Any ideas as to why he keeps blowing them? http://imgur.com/v9BLWGvThat's a weird spot to burn out but I'm just going to blindly say that your problem is probably coming from the risers. Use powered USB risers so the cards pull power straight from the PSU and not from the motherboard. See I thought soo too, but I used it for months with no issues like that Maybe the other guy overclocked the cards very heavily so they pulled more power. Or maybe he didn't connect the molex cables to the motherboard (which are not needed with powered risers).
|
Not your keys, not your coins!
|
|
|
Theneogeo (OP)
|
|
January 30, 2017, 10:53:26 PM |
|
Well he said he plugged in molex, and he didnt touch settings...... But I can't verify %100
|
|
|
|
dagarair
|
|
January 30, 2017, 11:20:06 PM |
|
i have made 100's of h81 board rigs and never once had a bad one. It has to be the non powered risers if i had to put $ on it. Al li use is powered risers.
|
|
|
|
Theneogeo (OP)
|
|
January 30, 2017, 11:23:09 PM |
|
i have made 100's of h81 board rigs and never once had a bad one. It has to be the non powered risers if i had to put $ on it. Al li use is powered risers.
Yea, cant see what else... Just weird that they blew on him and not me when I had for over 6 months
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
January 30, 2017, 11:23:47 PM |
|
NEVER use a MOLEX power connector on H81 BTC PRO
ALWAYS USE POWERED USB RISER ... use molex and board burns.. !
|
|
|
|
dagarair
|
|
January 30, 2017, 11:29:32 PM |
|
NEVER use a MOLEX power connector on H81 BTC PRO
ALWAYS USE POWERED USB RISER ... use molex and board burns.. !
I plug in molex AND use powered risers. Never ever, had an issue.
|
|
|
|
Theneogeo (OP)
|
|
January 30, 2017, 11:32:54 PM |
|
NEVER use a MOLEX power connector on H81 BTC PRO
ALWAYS USE POWERED USB RISER ... use molex and board burns.. !
Seems to be the same answer on other boards.... just dont understand why it worked for me for so long
|
|
|
|
Subw
|
|
January 30, 2017, 11:49:34 PM |
|
all this time you were burning your mobo just luck it happened after you sold them.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4256
Merit: 8587
'The right to privacy matters'
|
|
January 31, 2017, 12:58:03 AM |
|
all this time you were burning your mobo just luck it happened after you sold them.
very close the op pushed the board. then the board was shipped in the winter the board was cold and the buyer fired it up. and snap crackle pop. crisp mobo
|
|
|
|
Theneogeo (OP)
|
|
January 31, 2017, 02:44:45 AM |
|
I undervolted and slight overclock, soooo is this for warranty I assume now lol?
|
|
|
|
Theneogeo (OP)
|
|
February 01, 2017, 05:31:54 AM |
|
Thanks for the input
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 01, 2017, 06:59:16 AM |
|
same thing, using non powered riser with my gpu, ever had any issue, but i always run my gpu at 140watt maximum...
he probably abused the maximum load of the motherboard
|
|
|
|
|