PascalCoin miners: what are your mining speeds?

[BChydro]

Hey guys,

I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.

If you've tried mining PascalCoin, could you please share the following?

A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available

Thanks!

[WhyMe]

So you don't know how write correctly your proper url site ?

[BChydro]

So you don't know how write correctly your proper url site ?

Apparently not, thanks for catching that :p Works now

[BChydro]

I know some of you guys have got that sweet info

[kyne]

Hi, I would like to share my information

A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall

Hey guys,

I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.

If you've tried mining PascalCoin, could you please share the following?

A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available

Thanks!

[PovertyByte]

From the NiceHash Excavator miner thread, with version 1.0.0a

GTX 1070 FTW
134mhz OC (234'ish over reference) 500mhz OC memory

50% TDP, 904 MH/s
79% TDP (maximum draw), 1016 MH/s


I have not played around with memory and core clocks to know what this coin prefers I am just using my ZEC setting. I seem to run into the problem where the miner or driver locks the card to 731mv and 1607 clock speeds (35% TDP) if I change my settings too much forcing me to restart my PC. I had this problem with ZEC before too

Expanding on my quote, memory and core clock both increase the mining speed, and I could get more hashes by upping the memory OC 200mhz more. I can also report that this script heats up my 1070 much more than it should be. Down the line there may be an improved NVidia miner for Pascal that should fix whatever is causing the excess heat and it may up the hash rate some more

[DrX]

Could you add 290(x) and 390(x) cards on the list?

And maybe dual mining option? with changeable dcri?

[yoshcat]

rig 4x380X (3xPC+1xXFX) - 2200 MH/s , 810W (entire rig) from the Wall (mod bios)
HD 6990 (Saph.) - 650 MH/s, Power consumption -  did not measure, lazy
HD 7950 (MSI,GA) - by 525 MH/s, Power consumption - did not measure, lazy
HD 7970\280X (Saph.) - 555 MH/s, Power consumption - did not measure, lazy

[BChydro]

Hi, I would like to share my information

A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall

Hey guys,

I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.

If you've tried mining PascalCoin, could you please share the following?

A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available

Thanks!

Whoa, 100W?? That sounds crazy low. I thought Pascal consumes more power than ZEC or ETH, and those draw ~140-150W on the 470. Any crazy bios mod or undervolt?

[nu1mlock]

I get the following speeds using the version that Nanopool links to (says sgminer 5.5-nicehash-1 when starting it):

Sapphire Nitro RX 470 8GB with some modded bios (can't remember which): 662 MH/s
Asus GTX 1080 (factory overclocked with core at 1886MHz): 1152 MH/s

I have no tools to measure watts but I don't really care since I pay a flat rate on my electricity. However, MSI Afterburner reports a max of 124W on the RX 470. I don't know how accurate that is.

[Roy176]

PowerCooler RX 480 8GB    0.810 GH/s
MSI             RX 480 4GB    0.700 GH/s
Gigabyte      R9 390 8GB    0.671 GH/s

[cptfisher]

sapphire rx 470 OC reference

37% fan speed
-125mv voltage offset
1020mhz ram
300mhz ram

540 MH/s

50w from WALL (psu is shit... not even gold so i think real is about 40)

[RentGPU]

Msi rx470 gamingx OC 712-720 MH/s core and mem clock secret don't know the watt at wall but afterburner says 120watt i don't care about electricity so , fan 60% temp 47c. GOodLuCK

[kyne]

My rig contains 5 Rx470. I'm reduced voltage offset from wattools at -15 (15*6.25mv). Power draw from the wall for full rig @560-570W.
XMR use the lowest power my full rig (5*700H/s) draw power at wall @460-470W.

Hi, I would like to share my information

A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall

Hey guys,

I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.

If you've tried mining PascalCoin, could you please share the following?

A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available

Thanks!

Whoa, 100W?? That sounds crazy low. I thought Pascal consumes more power than ZEC or ETH, and those draw ~140-150W on the 470. Any crazy bios mod or undervolt?

[cptfisher]

Msi rx470 gamingx OC 712-720 MH/s core and mem clock secret don't know the watt at wall but afterburner says 120watt i don't care about electricity so , fan 60% temp 47c. GOodLuCK

is not worth to go 720 mhs unless you have  CHEAP electricity.
is easy to reach such speed

power  +22%

voltage offset -100mv

ram 300 mhz

core 1315 mhz

voila'

power from wall is 160 W from WALL (120 is only from pci express lane - DANGEROUS)

[RentGPU]

Msi rx470 gamingx OC 712-720 MH/s core and mem clock secret don't know the watt at wall but afterburner says 120watt i don't care about electricity so , fan 60% temp 47c. GOodLuCK

is not worth to go 720 mhs unless you have  CHEAP electricity.
is easy to reach such speed

power  +22%

voltage offset -100mv

ram 300 mhz

core 1315 mhz

voila'

power from wall is 160 W from WALL (120 is only from pci express lane - DANGEROUS)

You are right but i have cheap electricity

[BChydro]

My rig contains 5 Rx470. I'm reduced voltage offset from wattools at -15 (15*6.25mv). Power draw from the wall for full rig @560-570W.
XMR use the lowest power my full rig (5*700H/s) draw power at wall @460-470W.

Hi, I would like to share my information

A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall

Hey guys,

I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.

If you've tried mining PascalCoin, could you please share the following?

A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available

Thanks!

Whoa, 100W?? That sounds crazy low. I thought Pascal consumes more power than ZEC or ETH, and those draw ~140-150W on the 470. Any crazy bios mod or undervolt?

What are wattools? Going to have to put a bit more effort into flashing my 470's, they consume way more power

[kyne]

My rig contains 5 Rx470. I'm reduced voltage offset from wattools at -15 (15*6.25mv). Power draw from the wall for full rig @560-570W.
XMR use the lowest power my full rig (5*700H/s) draw power at wall @460-470W.

Hi, I would like to share my information

A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall

Hey guys,

I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.

If you've tried mining PascalCoin, could you please share the following?

A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available

Thanks!

Whoa, 100W?? That sounds crazy low. I thought Pascal consumes more power than ZEC or ETH, and those draw ~140-150W on the 470. Any crazy bios mod or undervolt?

What are wattools? Going to have to put a bit more effort into flashing my 470's, they consume way more power

wattools is a software that can modify voltage without flashing you RX400 card. you can try by this link http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series. Flashing VBios require for Memory strap to change memory timing at higher memory clock to increase ethash rate with the same power usage.

[wtman]

Does anyone have any accounts for sale? Let me know if so.