arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 04:54:39 AM |
|
|
i don't post much, but this space for rent.
|
|
|
Holliday
Legendary
Offline
Activity: 1120
Merit: 1012
|
|
March 01, 2017, 05:43:12 AM |
|
That's sweet! I see the errors you mentioned in the bladeforums post, but I think that just gives it "personality".
How many hours do you have into it?
Do you think it would take a beating (as say... a bushcraft knife)?
|
If you aren't the sole controller of your private keys, you don't have any bitcoins.
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 06:24:23 AM |
|
That's sweet! I see the errors you mentioned in the bladeforums post, but I think that just gives it "personality".
How many hours do you have into it?
Do you think it would take a beating (as say... a bushcraft knife)?
it SHOULD survive a beating, though i can't really guarantee it. the heat treat wasn't anywhere close to precise, ya know? if i were less afraid of destroying it, i'd test it some, but... yea. my nerves couldn't take that. hours, probably something like 15 or 20? i can get it hair shaving sharp, but since i only have a dremel it's a very uneven, ugly looking edge. i think the biggest bushcraft concern would be rust. it's 1080 steel, high carbon and not much else, so it'll be susceptible to rust.
|
i don't post much, but this space for rent.
|
|
|
Lufkum
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 01, 2017, 06:59:03 AM |
|
Nice blade mate! I always wanted to craft some. Did you use a beltsander for shaping it or only hands tools?
Posted From bitcointalk.org Android App
|
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 07:00:43 AM |
|
Nice blade mate! I always wanted to craft some. Did you use a beltsander for shaping it or only hands tools?
Posted From bitcointalk.org Android App
no belt sander, don't have one. mostly my dremel rotarty tool, but the details and shiny finish were hand tools.
|
i don't post much, but this space for rent.
|
|
|
PokerDiceMan
|
|
March 01, 2017, 09:19:55 AM |
|
how much custom knives, and can shiping outside youre country or not
|
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 05:42:11 PM |
|
how much custom knives, and can shiping outside youre country or not
what country would i be shipping to? i'd need to check rules. don't think it would be a problem though. i'd like $250 USD, so about .2 btc. plus shipping, depending.
|
i don't post much, but this space for rent.
|
|
|
Holliday
Legendary
Offline
Activity: 1120
Merit: 1012
|
|
March 01, 2017, 06:20:24 PM |
|
i can get it hair shaving sharp, but since i only have a dremel it's a very uneven, ugly looking edge. Nothing a good sharpener won't fix. i think the biggest bushcraft concern would be rust. it's 1080 steel, high carbon and not much else, so it'll be susceptible to rust.
I mean, the blade looks nice and thick from the pics, so I'm sure it could survive a beating (stuff like hitting it with a piece of wood to split another piece of wood), as long as the handle is up to it. Rust is only a concern if it's neglected!
|
If you aren't the sole controller of your private keys, you don't have any bitcoins.
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 06:48:26 PM |
|
i can get it hair shaving sharp, but since i only have a dremel it's a very uneven, ugly looking edge. Nothing a good sharpener won't fix. i think the biggest bushcraft concern would be rust. it's 1080 steel, high carbon and not much else, so it'll be susceptible to rust.
I mean, the blade looks nice and thick from the pics, so I'm sure it could survive a beating (stuff like hitting it with a piece of wood to split another piece of wood), as long as the handle is up to it. Rust is only a concern if it's neglected! 1/8th inch thick, yea. and the handle is held on with the pins and loctite 5 minute epoxy. it should hold up to whatever just fine. i'm just afraid to try it! and yea, i need a good sharpener... first thing i'll buy when i get some money.
|
i don't post much, but this space for rent.
|
|
|
Holliday
Legendary
Offline
Activity: 1120
Merit: 1012
|
|
March 01, 2017, 08:29:31 PM |
|
1/8th inch thick, yea. and the handle is held on with the pins and loctite 5 minute epoxy. it should hold up to whatever just fine. Sounds rugged indeed. i'm just afraid to try it! While I do like collecting knives, ultimately they are tools for me! Of course, I would say it's up to whoever purchases your knife to be the one to "break it in" (unless you planned on making a "run" of them in which case it would be cool to show off it's durability). and yea, i need a good sharpener... first thing i'll buy when i get some money.
I need one myself. The one I want is pricey though! https://www.wickededgeusa.com/product/pro-pack-ii/
|
If you aren't the sole controller of your private keys, you don't have any bitcoins.
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 08:32:53 PM |
|
1/8th inch thick, yea. and the handle is held on with the pins and loctite 5 minute epoxy. it should hold up to whatever just fine. Sounds rugged indeed. i'm just afraid to try it! While I do like collecting knives, ultimately they are tools for me! Of course, I would say it's up to whoever purchases your knife to be the one to "break it in" (unless you planned on making a "run" of them in which case it would be cool to show off it's durability). and yea, i need a good sharpener... first thing i'll buy when i get some money.
I need one myself. The one I want is pricey though! https://www.wickededgeusa.com/product/precision-sharpener-we130/that... is one hell of a sharpener. and i'll probably make more like this one eventually, but i need some tools to assure better repeatability and consistency first. i agree, tools. meant to be used. if i wasn't so broke and therefore kinda really needing the money from selling it, i'd have bought enough steel to make two, and test one to destruction. maybe next time.
|
i don't post much, but this space for rent.
|
|
|
dylanc
|
|
March 01, 2017, 09:38:56 PM |
|
just finished my 2nd custom knife the other day. thought someone here might like a peek. thoughts?
Looks good and sharp. What do you normally use them for?
|
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 01, 2017, 09:41:44 PM |
|
hopefully, making a living by selling! i didn't have a particular use in mind here, just kinda let the pencil do what it wanted.
|
i don't post much, but this space for rent.
|
|
|
Anegg
Sr. Member
Offline
Activity: 469
Merit: 250
CryptoTalk.Org - Get Paid for every Post!
|
|
March 02, 2017, 01:17:35 AM |
|
Looks bad ass. How much does it cost? How long did it take you to make it?
|
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
|
March 02, 2017, 01:20:49 AM |
|
asking for $250 USD, but negotiable.
better part of two months, but hours wise, something like 15, maybe 20? not really sure.
would have been a lot faster with better tools. a dremel can DO the work, but it's not fast at cutting and grinding steel.
|
i don't post much, but this space for rent.
|
|
|
Stingraider
Newbie
Offline
Activity: 42
Merit: 0
|
|
October 03, 2017, 01:03:18 PM |
|
did you make this all by yourself? it looks fantastic, are you selling these? you'd make a good buck for them
|
|
|
|
Franky00
|
|
October 03, 2017, 01:13:58 PM |
|
Excellent knives! I have a small collection of famous brand knives. I dream of buying a Japanese knife Rockstead. But it is a pity that in my country there is a ban on the storage of bladed weapons
|
|
|
|
|