Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
January 01, 2012, 02:19:30 AM |
|
Does somebody have some pictures how i can disassembe the fan from a Sapphire 5850 Xtreme ?
Thanks
? It's held by 3 screws, use a screwdriver...
|
|
|
|
plastic.elastic
|
|
January 01, 2012, 03:54:50 AM |
|
Does somebody have some pictures how i can disassembe the fan from a Sapphire 5850 Xtreme ?
Thanks
? It's held by 3 screws, use a screwdriver... Can someone show me whats screwdriver? Pictures please.
|
Tips gladly accepted: 1LPaxHPvpzN3FbaGBaZShov3EFafxJDG42
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 01, 2012, 04:31:06 AM |
|
easy guys... some people just like instructions laid out step by step......
carlo. it is pretty simple, just take the thing apart. don't lose the little screws. put a nice thin layer of thermal paste back on the gpu when you put it back together. youll be fine.
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
plastic.elastic
|
|
January 01, 2012, 04:42:01 AM |
|
easy guys... some people just like instructions laid out step by step......
carlo. it is pretty simple, just take the thing apart. don't lose the little screws. put a nice thin layer of thermal paste back on the gpu when you put it back together. youll be fine.
I like your step by step.
|
Tips gladly accepted: 1LPaxHPvpzN3FbaGBaZShov3EFafxJDG42
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
January 02, 2012, 08:36:03 AM |
|
Remove top stick Drill a hole in the top off center some Add oil Reapply sticker/tape
Thanks SlaveInDebt, Your tips worked, I wish I had knew this before, (5 getto fan later) Here's where I've drilled, (pic) fill that small hole 3-4 time and spin the fan by hand in between. (I did not have had to remove the heatsin to unplug/pull the wire) Fan now work like a new.
|
|
|
|
SlaveInDebt
|
|
January 03, 2012, 01:16:28 AM |
|
No problem Transisto though I drilled one hole on the other side (top)
|
"A banker is a fellow who lends you his umbrella when the sun is shining, but wants it back the minute it begins to rain." - Mark Twain
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
January 04, 2012, 01:58:16 AM |
|
No problem Transisto though I drilled one hole on the other side (top) Also note that my hole is offset from the center, The first time I had drilled in the middle and ended up into the metal rod/axis.
|
|
|
|
Littleshop
Legendary
Offline
Activity: 1386
Merit: 1004
|
|
January 05, 2012, 05:30:30 AM |
|
I have a bunch of these fans coming in two weeks from now. I will sell them for $19.99
|
|
|
|
Turbor
Legendary
Offline
Activity: 1022
Merit: 1000
BitMinter
|
|
January 05, 2012, 10:17:52 AM |
|
I have a bunch of these fans coming in two weeks from now. I will sell them for $19.99 Buy for 40, sell for 20
|
|
|
|
P4man
|
|
January 05, 2012, 01:17:45 PM |
|
He is not going to buy them for $40. You can buy them for $10 or so on alibaba in quantities.
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
January 06, 2012, 06:46:57 AM |
|
These turbine fan have nothing to do with it OP.
We're talking 5850 xtreme fans.
|
|
|
|
despoiler
Member
Offline
Activity: 94
Merit: 10
|
|
January 10, 2012, 11:45:16 PM |
|
Remove top stick Drill a hole in the top off center some Add oil Reapply sticker/tape
Oh god no don't do this! http://www.youtube.com/watch?v=kH8spGRL3YkThe 5800 series fans had quite a few issues. I think the fan bearings were not properly greased/oiled from the factory. I followed the above video and my fan is as good as new. No more noise.
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
January 11, 2012, 07:57:18 AM |
|
Remove top stick Drill a hole in the top off center some Add oil Reapply sticker/tape
Oh god no don't do this! http://www.youtube.com/watch?v=kH8spGRL3YkThe 5800 series fans had quite a few issues. I think the fan bearings were not properly greased/oiled from the factory. I followed the above video and my fan is as good as new. No more noise. After looking at that video, I am even more likely to drill a hole at the top of turbine fan and pour some oil in there. I think the trick is to offset it about 2mm. It save me from having to remove the heatsink to get to the screws. Thank for the video
|
|
|
|
chungenhung
Legendary
Offline
Activity: 1134
Merit: 1005
|
|
February 05, 2012, 04:36:58 AM |
|
Remove top stick Drill a hole in the top off center some Add oil Reapply sticker/tape
Thanks SlaveInDebt, Your tips worked, I wish I had knew this before, (5 getto fan later) Here's where I've drilled, (pic) fill that small hole 3-4 time and spin the fan by hand in between. (I did not have had to remove the heatsin to unplug/pull the wire) Fan now work like a new. That definitely worked! Hard thing is knowing when to stop drilling. I drill a bit, use a flash light, rotate the fan to see if anything inside is moving. If you don't see anything, keep drilling, then repeat.
|
|
|
|
Transisto
Donator
Legendary
Offline
Activity: 1731
Merit: 1008
|
|
February 05, 2012, 04:39:39 AM |
|
... Fan now work like a new.
That definitely worked! Hard thing is knowing when to stop drilling. I drill a bit, use a flash light, rotate the fan to see if anything inside is moving. If you don't see anything, keep drilling, then repeat. That fan just broke again a few days ago. It may be something else, I've put it on a card I am to RMA so won't know it reoiling would fix it again.
|
|
|
|
Tim the Magician
Member
Offline
Activity: 96
Merit: 10
|
|
February 17, 2012, 03:05:32 AM |
|
Ok.. I'm going to give this a try. I have 2 failed 5850 Xtreme fans and I don't really want to deal with the RMA process for a discontinued item.. Given SlaveInDebt's success I am going to attempt his method of drilling through the top.. Remove top stick Drill a hole in the top off center some Add oil Reapply sticker/tape
Worked fine, several months since then without issue.
For the people asking how to take one of these apart.. Remove the 3 screws under the fan:
Unplug the power connector:
Push the power cable under the heat sink while pulling on the fan to give yourself some room to work..
Here is the top with the sticker removed:
I'm planning to drill just outside the ring around the center.. Here is the lubricant I'm planning to use:
Does anyone have any last minute suggestions? -Tim
|
|
|
|
_Vince_
Newbie
Offline
Activity: 33
Merit: 0
|
|
February 17, 2012, 04:22:43 AM |
|
I re-oiled several fans already.
I'd suggest that you could use a normal knife, small one, with good tip. Then drill a hole right in the center of the fan, you will see the metal shaft after several tries.
Don't use high performance electric drill
|
|
|
|
Tim the Magician
Member
Offline
Activity: 96
Merit: 10
|
|
February 17, 2012, 04:36:20 AM Last edit: February 17, 2012, 05:29:15 AM by Tim the Magician |
|
Don't use high performance electric drill
Thanks for the reply.. good idea.. I wasn't going to use a drill at all.. I have those quick swap drill bits with the hex bases.. I was going to use a 1/16th inch bit and simply spin it in my fingers while pushing down on the end. That way I can control it better and avoid drilling into something important.
|
|
|
|
_Vince_
Newbie
Offline
Activity: 33
Merit: 0
|
|
February 17, 2012, 05:14:03 AM |
|
Btw I also want to said that I drill from the bottom, not top. It is quite strange for me to see you remove to top sticker which has "Sapphire" word
If you check the previous pic, you will see that they drilled the bottom, non-moving part of the fan.
|
|
|
|
Tim the Magician
Member
Offline
Activity: 96
Merit: 10
|
|
February 17, 2012, 05:19:37 AM |
|
The guy who drilled from the bottom said it stopped working again.. SlaveInDebt said he drilled from the top and his still works months later.
I actually removed both stickers and the bottom one has a PCB visible through the gaps.. I didn't feel like drilling through that was a good idea. Other fans which have a grease reservoir cap seem to have that located on the top.
|
|
|
|
|