mromero

[mromero]

I have an antminer s4 that is generating the following flaws and I would like them to help me solve them

1. some times when mining down from 2Th to 1100GH and other times mine 2.5TH the mine graph that appears in F2pool is very unstable will be the antminer or will be the pool

2. when there is no internet service the antminer starts to ring to alert that it is not connected to the network but then when the connection is restored it does not connect automatically I have to turn it off and turn it on so that it is connected that is normal?


Thanks, I hope you can help me.

[fanatic26]

Miners dont run at a constant speed, that variation is normal. The reported hash rate is just an average of what the miner is doing overall.

As an example this is an s7 running at 4.050 th/s (averaging 3.98th/s pool side)





As far as the machine not reconnecting, that is not really normal. The S4s I used to run never needed any type of reset due to a lost connection, it would just pick back up where it left off.