No Flashed Rx 480 runs like flashed

[ecohash]

Ok. So i was yesterday flashing 30 XFX Rx 480 RS and i was seen something what we should test.

I was done this:
1.Turn on computer with 1 Rx 480.
2.At start claymore speed test. (24.5 mhs, so standard)
3.FLASH
4.Reboot.
5.Again 2. Now. 30 mhs.
6.Turn off computer, put another one card.
7. GPU-Z shows that STOCK (100%) card have GPU and memory clock of Flashed card (but is stock). Default Clock and memory shows as card stock.
8.Test in Claymore takes me same result 30 mhs. 
9. So memory straps (2000mhz) must be still same (1750 mhz) (of flashed card).
10. I am using 1750 straps without flashing? I see that voltage too.


I see that we dont need to flash cards, only force windows to use specific config or something like that. For stock (ref) cards that can be safer. I was looking for file or something like that where is stored config. Can somebody help to find solution? This can be best way without waranty break.

Sorry for my English.

[kisk]

Never heard of this but you could test by flashing the second card to 1750 just to see what you get.

[ecohash]

Never heard of this but you could test by flashing the second card to 1750 just to see what you get.

I was done flash at all cards. (One 2100 mhz memory, rest 2150 mhz). When i have this "bug" i was trying to mine claymore with 30 mhs success. Then taken this card to linux rig and i have 24.5 mhs again. I think that windows 8 (i am using this) have something like "on fly" settings. I was looking for last modified files in windows and there is folder caled DriverStore and Temp. I want to install clean Windows and test again.

[niksdt101]

Ok. So i was yesterday flashing 30 XFX Rx 480 RS and i was seen something what we should test.

I was done this:
1.Turn on computer with 1 Rx 480.
2.At start claymore speed test. (24.5 mhs, so standard)
3.FLASH
4.Reboot.
5.Again 2. Now. 30 mhs.
6.Turn off computer, put another one card.
7. GPU-Z shows that STOCK (100%) card have GPU and memory clock of Flashed card (but is stock). Default Clock and memory shows as card stock.
8.Test in Claymore takes me same result 30 mhs. 
9. So memory straps (2000mhz) must be still same (1750 mhz) (of flashed card).
10. I am using 1750 straps without flashing? I see that voltage too.


I see that we dont need to flash cards, only force windows to use specific config or something like that. For stock (ref) cards that can be safer. I was looking for file or something like that where is stored config. Can somebody help to find solution? This can be best way without waranty break.

Sorry for my English.

is it possible to share the custom files for me..i was looking for xfx cards

[bughatti]

Ok. So i was yesterday flashing 30 XFX Rx 480 RS and i was seen something what we should test.

I was done this:
1.Turn on computer with 1 Rx 480.
2.At start claymore speed test. (24.5 mhs, so standard)
3.FLASH
4.Reboot.
5.Again 2. Now. 30 mhs.
6.Turn off computer, put another one card.
7. GPU-Z shows that STOCK (100%) card have GPU and memory clock of Flashed card (but is stock). Default Clock and memory shows as card stock.
8.Test in Claymore takes me same result 30 mhs. 
9. So memory straps (2000mhz) must be still same (1750 mhz) (of flashed card).
10. I am using 1750 straps without flashing? I see that voltage too.


I see that we dont need to flash cards, only force windows to use specific config or something like that. For stock (ref) cards that can be safer. I was looking for file or something like that where is stored config. Can somebody help to find solution? This can be best way without waranty break.

Sorry for my English.

is it possible to share the custom files for me..i was looking for xfx cards

Same here if you could share files, I just bought the xfx rx480 reference 8gb to see how much better it is at watts/hashrate over my sapphire rx 480's