New Saphire Nitro 480 4GB elphida - Anyone have a bios for these ?

[Marvell1]

Found a bios for t since it does not seem to work with polaris bios editior.

Problem is the bios is locked somehow at 1750 mhs, i cant change these speed in watt tool , even when i do it diplayes that its changed but
the speed is still capped at 25mhs.

Any ideas ?

[1715184059]

1715184059

[1715184059]

1715184059

[1715184059]

1715184059

[1715184059]

1715184059

[1715184059]

1715184059

[Truthchanter]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

[Marvell1]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

[Cubirez]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

@Marvell1 : you need 1.41 to make it work properly with elpida.

[Kompik]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

@Marvell1 : you need 1.41 to make it work properly with elpida.

Do you have a link please? i have been trying to find this version, but only the 1,4 everywhere, thx

[MakeBitcoinGreatAgain]

İam using 4.1 version and it works

[Cubirez]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

@Marvell1 : you need 1.41 to make it work properly with elpida.

Do you have a link please? i have been trying to find this version, but only the 1,4 everywhere, thx

here you go : https://github.com/tpruvot/PolarisBiosEditor

[Kompik]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

@Marvell1 : you need 1.41 to make it work properly with elpida.

Do you have a link please? i have been trying to find this version, but only the 1,4 everywhere, thx

here you go : https://github.com/tpruvot/PolarisBiosEditor

Thank you, I have found this link, but it just does not work with the newest ASUS STRIX 4GB 470 Elipda cards . No card works, it just says something like default polaris radeon chip and I need to reflash back to original bios.

[Cubirez]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

@Marvell1 : you need 1.41 to make it work properly with elpida.

Do you have a link please? i have been trying to find this version, but only the 1,4 everywhere, thx

here you go : https://github.com/tpruvot/PolarisBiosEditor

Thank you, I have found this link, but it just does not work with the newest ASUS STRIX 4GB 470 Elipda cards . No card works, it just says something like default polaris radeon chip and I need to reflash back to original bios.

Just bought new Sapphire nitro RX 480 (all elpida), and indeed Polaris bios editor 1.41 doesn't work on them. I can open the ROM but i'm unable to see the timings.
I had to do some Hex editing. It is much more time consuming, but it's not too complicated to do if you follow the excellent tutorial on Anorak's website :
https://anorak.tech/t/anoraks-amd-vbios-hex-modification-tutorial/126

[Kompik]

That is quite different issue. I can see the timings, change them, but when i load the rom, it says Default Polaris Chip or something like that and the card does not work

[Marvell1]

There is a Polaris Bios Editor that has support for elpida.. just have a search a bit for it

I had a 480 4gb nitro (not +) with elpida and with modded bios using 1500 strap I could only get 26.5mhs stable.. 27.5+ was unstable.. 27 may have been unstable too so i sold it

i know that , 1.4 supported the first run of elpida cards, this new batch of saphires are least dont work properly with that editor , you have to hex edit them for now

@Marvell1 : you need 1.41 to make it work properly with elpida.

Do you have a link please? i have been trying to find this version, but only the 1,4 everywhere, thx

here you go : https://github.com/tpruvot/PolarisBiosEditor

Thank you, I have found this link, but it just does not work with the newest ASUS STRIX 4GB 470 Elipda cards . No card works, it just says something like default polaris radeon chip and I need to reflash back to original bios.

Just bought new Sapphire nitro RX 480 (all elpida), and indeed Polaris bios editor 1.41 doesn't work on them. I can open the ROM but i'm unable to see the timings.
I had to do some Hex editing. It is much more time consuming, but it's not too complicated to do if you follow the excellent tutorial on Anorak's website :
https://anorak.tech/t/anoraks-amd-vbios-hex-modification-tutorial/126

yup had to do the same thing