[PRE-ANN] [TESTNET] Infocoin | Uncensorable Data in the Blockchain

[leonard852]

Great new ANN!   Doing great DEV. Keep this up .The project is very good, the future will likely be one of the very successful projects

[1714699862]

1714699862

[1714699862]

1714699862

[kicauklaten]

I think Infocoin is great project and many people support this.
Goodluck dev

[abjingyun]

Great new ANN!,Interesting project,watching and going to participate, I think this project have a bright future .

[malcolml4]

support,the idea is good, will pay attention to your post and further information.

[abjingyun]

It seems a pretty interesting project, ICO is pretty good, but I'm not sure to join,
I'll keep seeing the next developments and within a few days left to join the signature campaign, I'll keep seeing until I decide to join or not, good luck

[eule]

Thanks a lot for the interest. Currently tearing my hairs out while fighting with Visual Studio to compile the Windows wallet.  

Also I found out that you NEVER should use walletd to open a wallet created with simplewallet, as walletd will save the wallet in a different format that can't be opened with simplewallet anymore. Luckily it's possible to export the keys and import them back into simplewallet.

Inserting data into the tx_extra field requires the use of walletd RPC commands at the moment, which is new to me, I have a lot to learn. See https://wiki.bytecoin.org/wiki/Send_transaction_-_Bytecoin_RPC_Wallet_API . If an experienced dev wants to help, shoot me a PM.

Also to clarify: There will be no ICO.

[eule]

The good news: The test network is running smoothly and I mined a ton of worthless coins.
The bad news: I am so far unable to add extra data to a transaction.

According to https://wiki.bytecoin.org/wiki/Send_transaction_-_Bytecoin_RPC_Wallet_API, this should work:

Code:

curl -X POST -i -H "Accept: application/json" -d '
{  
  "params":
	{  
	"anonymity":0,
	"fee":1000000,
	"unlockTime":0,
	"paymentId":"",
	"addresses":
	[  
	"iz4Z1u39PLbg3djCXo9CBGdXRLrBtf7ceTfmZAsvhaANUBQixShfRXV8eyaoAQJmqhZYuZyar6ptbXUBNufDi6c51yxiqr8wJ"
	],
	"transfers":
		[  
        	{  
           	"amount":10,
           	"address":"iz5NJ4B5Rc6AmtoiVFoJy2jWGDvKPMGuoGCmNxL2t9sXZ2LUXUJPZLrX3pLau4P9tjY4M2VyoYGPWjn6mETrNsqJ2T21YtMtx"
        	}
		],
	"changeAddress":""
	},
	"extra":"HELLOWORLD",
	"jsonrpc":"2.0",
	"id":"test",
	"method":"sendTransaction"}
' http://127.0.0.1:8070/json_rpc

This is the output I get from walletd:

Code:

HTTP/1.1 200 OK
Content-Length: 773
Server: CryptoNote-based HTTP server

{"id":"test","jsonrpc":"2.0","result":{"transaction":{"amount":-1000010,"blockIndex":4294967295,"extra":"016d7bb13f30dffd6e62361abbf0eb64b1d946455bd5d2d4bf37f63c11fbece5f0","fee":1000000,"isBase":false,"paymentId":"","state":0,"timestamp":0,"transactionHash":"23dabee38c0354bc8dbd4c800e19d9df1295c5a2fc237969cf8fb3e67c45793a","transfers":[{"address":"iz5NJ4B5Rc6AmtoiVFoJy2jWGDvKPMGuoGCmNxL2t9sXZ2LUXUJPZLrX3pLau4P9tjY4M2VyoYGPWjn6mETrNsqJ2T21YtMtx","amount":10,"type":0},{"address":"iz4Z1u39PLbg3djCXo9CBGdXRLrBtf7ceTfmZAsvhaANUBQixShfRXV8eyaoAQJmqhZYuZyar6ptbXUBNufDi6c51yxiqr8wJ","amount":8999052258,"type":2},{"address":"iz4Z1u39PLbg3djCXo9CBGdXRLrBtf7ceTfmZAsvhaANUBQixShfRXV8eyaoAQJmqhZYuZyar6ptbXUBNufDi6c51yxiqr8wJ","amount":-9000052268,"type":0}],"unlockTime":0}}}

As you can see, the extra field contains no "HELLOWORLD"...
When I put the extra field above the transaction, like this:

Code:

curl -X POST -i -H "Accept: application/json" -d '
{  
  "params":
	{  
	"extra":"HELLOWORLD",
	"anonymity":0,
	"fee":1000000,
	"unlockTime":0,
	"paymentId":"",
	"addresses":
	[  
	"iz4Z1u39PLbg3djCXo9CBGdXRLrBtf7ceTfmZAsvhaANUBQixShfRXV8eyaoAQJmqhZYuZyar6ptbXUBNufDi6c51yxiqr8wJ"
	],
	"transfers":
		[  
        	{  
           	"amount":10,
           	"address":"iz5NJ4B5Rc6AmtoiVFoJy2jWGDvKPMGuoGCmNxL2t9sXZ2LUXUJPZLrX3pLau4P9tjY4M2VyoYGPWjn6mETrNsqJ2T21YtMtx"
        	}
		],
	"changeAddress":""
	},
	"jsonrpc":"2.0",
	"id":"test",
	"method":"sendTransaction"}
' http://127.0.0.1:8070/json_rpc

I get:

Code:

{"error":{"code":-32600,"message":"Invalid Request"},"id":"test","jsonrpc":"2.0"}

If somebody could tell me what tag to use, I would be forever grateful. I tried a lot, like extra_padding, tx_extra_tag_padding, basically all variations  of the tags seen in: https://github.com/euleausberlin/infocoin/blob/master/src/CryptoNoteCore/TransactionExtra.h I could think of.

Unfortunately, while there is some information on why and how tx-extra is supposed to be used, there is very little information on how to actually do it. A little push in the right direction from someone who actually knows Cryptonote would be much appreciated.

TODO: Insert data into transactions
Fix evil Cryptonote bug from a few months ago (already have the commit with the necessary changes thanks to moneromoo, but no need to do that until data can be inserted)
Windows wallet

[intec]

Keep in mind how dangerous a currency like this can be.

Here is why you should not do it as of now :

You have no tools to protect this decentralized blockchain.

[julerz12]

Great project all in all, but the name.. not really,
it's already been taken: https://bitcointalk.org/index.php?topic=1967550.0
(Note that this Info coin is already listed on some exchange)
So, I would suggest another name. Maybe Datacoin? 

[bugreporterr]

https://bitcointalk.org/index.php?topic=325735.0

Datacoin already taken and still active

[GameKyuubi]

Datacoin already exists and is still alive in the shadows.  Maybe you should work with the Datacoin community?  There are still quite a few dedicated supporters remaining.