s9 temp(chip1) is not showing but temp(chip2) is okay. Suggestions?

[speakerftd]

My s9 is not reporting temp(chip1), but temp(chip2) is okay. I have installed the upgrade firmware to antminer-S9-all-201702272206-autofreq-user-Update2UBI-NF.tar.gz twice trying to fix the problem. The upgrade firmware s9_fix_upgrade.tar.gz and this will not load. I am running on the S9_12.0T submodel. I don't know if this submodel is fixed frequency or if I should try uploading a fixed frequency firmware update--I don't know if this is a fixed frequency unit. I would sincerely appreciate any help with this.

[1714980369]

1714980369

[1714980369]

1714980369

[invisiblefriend321]

my friend --

did you ever find an answer ?

I'm having similar issue

new S9 but no temp (chip1) in all 3 spots just blank -- yet temp chip 2 is working fine

is hashing ok ?



any advice ?

peace n respect

[jbillk]

Same issue with my brand new S9. Any updates?
All Chip1 temps are '-'
All Chip2 temps are normal.

Hashing fine, so don't really wan to mess with firmware.

[invisiblefriend321]

My s9 is not reporting temp(chip1), but temp(chip2) is okay. I have installed the upgrade firmware to antminer-S9-all-201702272206-autofreq-user-Update2UBI-NF.tar.gz twice trying to fix the problem. The upgrade firmware s9_fix_upgrade.tar.gz and this will not load. I am running on the S9_12.0T submodel. I don't know if this submodel is fixed frequency or if I should try uploading a fixed frequency firmware update--I don't know if this is a fixed frequency unit. I would sincerely appreciate any help with this.

this is normal according to "bitmain" rep !


also many miners mention as well ---    no stress unless hashing seems off or numbers seem high

peace

[Dasher10]

SAME EXACT SITUATION ON a brand NEW T9+ and only hashing at 70% capacity.

Have asked Bitmain for support but nothing yet!

[HoleShot]

The Nov17 firmware fixes this problem. Temperature calibration is much better too.

This firmware queries the PIC on each hash board to determine if it is fixed frequency or auto. I am running two auto and one fixed in a miner which works perfectly.