|
April 20, 2017, 02:23:29 AM |
|
I can see 2 of the boards are not hashing here is my asic status
Any help is appreciated.
Uptime:80 | FPGA ver:100 -----BOARD-0----- PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=1350) 0c 0GH cooling:0/0x0 -----BOARD-1----- PSU[UNKNOWN]: 0->(171w/171w)[171 171 170] (->171w[171 171 170]) (lim=1350) 0c 304GH cooling:0/0x0 -----BOARD-2----- PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=1350) 0c 0GH cooling:0/0x0 -----BOARD-3----- PSU[UNKNOWN]: 0->(193w/193w)[193 193 193] (->193w[193 193 193]) (lim=1350) 0c 333GH cooling:0/0x0 LOOP[0] OFF TO:0 (test serial failed or something) 0: disabled (i2c good, no OC) 1: disabled (i2c good, no OC) LOOP[1] ON TO:0 2: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 73W 108A 48c] ASIC:[110c (125c) 835hz(BL: 835) 6 (E:192) F:0 L:0] 3: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 63W 94A 49c] ASIC:[ 85c (125c) 745hz(BL: 745) 7 (E:192) F:0 L:0] LOOP[2] OFF TO:0 (test serial failed or something) 4: disabled (i2c good, no OC) 5: disabled (i2c good, no OC) LOOP[3] ON TO:0 6: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 71W 105A 46c] ASIC:[ 85c (125c) 825hz(BL: 825) 7 (E:193) F:0 L:0] 7: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 84W 124A 58c] ASIC:[120c (125c) 905hz(BL: 905) 7 (E:193) F:0 L:0]
[H:HW:638Gh (500),W:293,L:0,A:4,MMtmp:0 TMP:(22)=>=>=>(38,43)] Pushed 11 jobs , in HW queue 4 jobs (sw:0, hw:0)! min:16 wins:27[this/last min:5/22] bist-fail:10, hw-err:0 leading-zeroes:41 idle promils[s/m]:0/0, rate:768gh/s asic-count:12 (wins:13+14) Fan:90, conseq:200 AC2DC BAD: 0 0 R/NR: 68/0 RTF asics: 0 FET: 0:9 1:9 0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn 0 purge_queue3 0 bad_idle 0 err_murata Adapter queues: rsp=0, req=24
|