Hi,
If anyone is interested in customs cables for their rigs, I would be more than glad to make it. Details Below.
DetailsType : PCIE
Connections : 6Pin to 6Pin, 8Pin to 8Pin
Cable Used : 1.5 Sq mm Havells Wire
Type : Molex
Connections : 4 Pin (You need to tell me your PSU Make and Model as each has a different Pinout)
Cable Used : 1.5 Sq mm Havells Wire
Type : Dupont
Connections : 2 Pin with On/Off Switch and Red or Green or White or Blue LED
Cable Used : Rainbow Cables
Type : Ethernet
Connection : Cat 5, Cat 5E, Cat 6
Note : If you are planning on Power over Ethernet please let me know in advance.
Cost Calculation : Total Cost = Pin Cost + Connector Cost + Wire Length + Shipping
Rough Estimation for 80Cm 6 PIn to 6 Pin PCIE Cable : 20 Rs + Shipping
So if you need any cables please let me know of the length of the wire, I will give you the final price.
Some Photos for DetailsEngineers PAD-01 Crimper Used for Molex, PCIE, Dupont, etcSample PCIE CrimpAnother Sample PCIE CrimpSample 6Pin to 6Pin PCIE Cable6 Pin PCIE Connector4 Pin Molex SamplePlease Note As I use 1.5 Sq MM wire the maximum power that can be handled is around 250W but I
strongly urge you to
limit it to <225W for fire safety reasons. I can use 2.5 Sq mm wire but the PCIE connector wont be able to handle that many Amps.
Also Note I will never do double crimping, I will always split them using a Y joint with solder and wrapped it with heat shrink.
Like ThisPlease post or PM if you need any cables.
Kind Regards,
BLife
