[ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency

[CumpsD]

Small tips for reducing DOA rate.

You can set your share difficulty by adding +0.0000xxxx to your CHNcoin adress:

yourCNCaddress+0.0004872

Recommend share difficulty:

Hash Rate (KHash/s)   Difficulty
1   +0.00000116
5   +0.00000582
10   +0.00001164
50   +0.00005821
100   +0.00011641
250   +0.00029103
500   +0.00058207
750   +0.00087310
1000   +0.00116414

Could you explain this a little?

I'm now using this cudaminer command, is this correct?

cudaminer.exe --algo scrypt -o chncoin.no-ip.biz:9333 -u CRWRgb1Gmrw8jjQbUeYAYhqpNjpB9avRH2+0.00029103 -p x -d 0 -i 1 -C 2 -l 80x2

What does the +0.00029103 actually improve?

[CumpsD]

Seems it's down again, server refused connection.

--
And up again, unstable?

[Narken]

Seems it's down again, server refused connection.

--
And up again, unstable?

No sorry, currently tweaking it. Have to restart p2pool server everytime, no way to reload scripts when started.

It should be rock stable with recent upgrades.

[CumpsD]

Seems it's down again, server refused connection.

--
And up again, unstable?

No sorry, currently tweaking it. Have to restart p2pool server everytime, no way to reload scripts when started.

It should be rock stable with recent upgrades.

Ah, ok I also got my first payout *yay* +0.308 CNC :p

Could you give some more info on the "+....." parameter for the username?

[Narken]

Small tips for reducing DOA rate.

You can set your share difficulty by adding +0.0000xxxx to your CHNcoin adress:

yourCNCaddress+0.0004872

Recommend share difficulty:

Hash Rate (KHash/s)   Difficulty
1   +0.00000116
5   +0.00000582
10   +0.00001164
50   +0.00005821
100   +0.00011641
250   +0.00029103
500   +0.00058207
750   +0.00087310
1000   +0.00116414

Could you explain this a little?

I'm now using this cudaminer command, is this correct?

cudaminer.exe --algo scrypt -o chncoin.no-ip.biz:9333 -u CRWRgb1Gmrw8jjQbUeYAYhqpNjpB9avRH2+0.00029103 -p x -d 0 -i 1 -C 2 -l 80x2

What does the +0.00029103 actually improve?

Im not that familiar with cudaminer.

For share difficulty:
If you got low hashrate, it might help to ask the pool to get lower shares difficulty to solve or you would perhaps never submit any share.
But its not that simple again, since you would have to solve more shares

I will try to dig up some more precise information.

[anatolikostis]

is something wrong with P2Pool?
there is incoming cnc in my wallet but p2p stats says nothing about blocks  

another one - my rejects level so high, about 40%.
yesterday I had only about 25%

[Narken]

is something wrong with P2Pool?
there is incoming cnc in my wallet but p2p stats says nothing about blocks  

another one - my rejects level so high, about 40%.
yesterday I had only about 25%

It works fine.


You need to refresh stats page in browser. Lastbock information is not updated live.
I will work on that later.

SO refresh stats page for newest blocks found ;-)

Also payments have been sent out for the last 12 hours ;-)
So everything is currently working correct


NOTE:
I'm currently fixing the p2pool code base, and will set up a new test server.
Payments should be more steady with added fixes recommended by p2pool devs.

[Narken]

is something wrong with P2Pool?
there is incoming cnc in my wallet but p2p stats says nothing about blocks  

another one - my rejects level so high, about 40%.
yesterday I had only about 25%

It works fine.


You need to refresh stats page in browser. Lastbock information is not updated live.
I will work on that later.

SO refresh stats page for newest blocks found ;-)

Also payments have been sent out for the last 12 hours ;-)
So everything is currently working correct


NOTE:
I'm currently fixing the p2pool code base, and will set up a new test server.
Payments should be more steady with added fixes recommended by p2pool devs.

New CNC test server up and running

http://chncoin.no-ip.biz:9340

Including all latest fixes and more even payment
It should solve the payout problems that most p2pools had.

Lets test it out and I will announce code so other nodes can follow.

It should also fix the DOA for some miners and slow miners

[Narken]

is something wrong with P2Pool?
there is incoming cnc in my wallet but p2p stats says nothing about blocks  

another one - my rejects level so high, about 40%.
yesterday I had only about 25%

It works fine.


You need to refresh stats page in browser. Lastbock information is not updated live.
I will work on that later.

SO refresh stats page for newest blocks found ;-)

Also payments have been sent out for the last 12 hours ;-)
So everything is currently working correct


NOTE:
I'm currently fixing the p2pool code base, and will set up a new test server.
Payments should be more steady with added fixes recommended by p2pool devs.

New CNC test server up and running

http://chncoin.no-ip.biz:9340

Including all latest fixes and more even payment
It should solve the payout problems that most p2pools had.

Lets test it out and I will announce code so other nodes can follow.

It should also fix the DOA for some miners and slow miners

Oh and CHNcoin diff just doubled :-(

[CumpsD]

Is there a changelog for your testserver?

(Since I didn't really had payout problems?)

[Narken]

Is there a changelog for your testserver?

(Since I didn't really had payout problems?)

Yes there is

https://github.com/narken/p2pool-altcoins

Bob is also using my new cnc p2pool code base now.  It got much lower DOA for all miners

[CumpsD]

I'll change my connection to the test server this evening, not home

Don't bring the production one down

[LeftToeCut]

I will point http://94.254.0.247:8800 to Narkens test net in a while.

[caish5]

Narken

Any chance you could get bbqcoin going on p2pool as well.
I've tried and failed miserably!

[Narken]

Narken

Any chance you could get bbqcoin going on p2pool as well.
I've tried and failed miserably!

I will work on it when I get time tomorrow.

Update:

New CNC Server 2 based on new code is stable and ready for action

http://chncoin.no-ip.biz:9340/static/

See first post on how to connect

[CumpsD]

Isn't it easier to bring down the 9333 one and bring the new one up on the same port?

Would save firewall configurations and settings, and keep all miners running

[Narken]

Isn't it easier to bring down the 9333 one and bring the new one up on the same port?

Would save firewall configurations and settings, and keep all miners running

I tried that, but its not possible due how to p2pool works.
Since share calculation and share ID is changed in new code it makes a lot of mess and DOA from old miners if I just switch over

Sp currently the old server
http://chncoin.no-ip.biz:9333/static/
is running on the old code base with wrongly share calculation.

and new one is running on new code base
http://chncoin.no-ip.biz:9340/static/

And since its p2pool, it doesnt matter that local hashrate is low, since we are noded up with rest of network using the new code base
I sent the new code base to BlastBoB and he's also using it.

 

[gyverlb]

Narken

Any chance you could get bbqcoin going on p2pool as well.
I've tried and failed miserably!

I will work on it when I get time tomorrow.

Update:

New CNC Server 2 based on new code is stable and ready for action

http://chncoin.no-ip.biz:9340/static/

See first post on how to connect

Updated my private node to join your network.

[Narken]

Narken

Any chance you could get bbqcoin going on p2pool as well.
I've tried and failed miserably!

I will work on it when I get time tomorrow.

Update:

New CNC Server 2 based on new code is stable and ready for action

http://chncoin.no-ip.biz:9340/static/

See first post on how to connect

Updated my private node to join your network.

Sure, just make sure your using same CHNcoin params as is my code base
https://github.com/narken/p2pool-altcoins

My p2pool thread with code base information:
https://bitcointalk.org/index.php?topic=198175

[CumpsD]

Network hashrate is plumeting: http://cnc.strament.com/

First it was 4 days till retarget, then 6, now already at 8 days+, estimated difficulty 15.5 (coming from 20-ish before the increase)

Up 'n down