Can this Antminer s9 11.85 th/s hashboard be repaired?

[miguelik]

Hello

I bought an Antminer s9, knowing it only had 2 working hashboards; no I am trying to see if the other hashboard can be repairable.

I Add the images...

http://imgur.com/a/nu6TO

The first 3 images are the defective hashboard, just in case something can be seen there.

The other images are the guy when only conecting one hashboard,

What I can see it happens there is:

  1. It detects less chips than what the hashboard has
  2. All the work becomes HW
  3.On an image I even got some hash rate

  If I wait more, HW just keep increasing.
 Temps are 0

Thanks all for your time.

Miguelik

[fanatic26]

You would have to send it in to be repaired. There is nothing user servicable about these boards.

bitmainwarranty would be your best bet depending on where you live

[OgNasty]

You would have to send it in to be repaired. There is nothing user servicable about these boards.

bitmainwarranty would be your best bet depending on where you live

If you're talking about the actual company Bitmainwarranty in Colorado and not Bitmain's warranty, I would agree. If you're in the US, it's pretty much your only option.

[miguelik]

You would have to send it in to be repaired. There is nothing user servicable about these boards.

bitmainwarranty would be your best bet depending on where you live

If you're talking about the actual company Bitmainwarranty in Colorado and not Bitmain's warranty, I would agree. If you're in the US, it's pretty much your only option.

Yes, the min problem is that I am located in Spain, Europe...

I May try looking at the capacitors for seeing if anyone is broken.

I think sending the hashboards to US is too expensive from here...