CNC Pool Report - All your CNC Pool Talk

[jk1985]

I'm working on a pool list for http://cnc.strament.com

Should have the basic thing done in a few minutes, then we'll add pools.

Nice 1!

[LeftToeCut]

Set up a new p2pool at http://188.95.224.183:8800 . Swedish server, latency should be goood. Fees at 3% atm. Hashes and feedback welcomed!

[Punkonjunk]

I decided to setup a new P2Pool here:

http://chnpool.yourcoins.org:8400

Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM

WAY better stale rate than other shitty p2pools. about 20% in my client. You have a link for figuring out my stale/reject on the server side? still don't quite understand p2pool so good.

[anatolikostis]

I decided to setup a new P2Pool here:

http://chnpool.yourcoins.org:8400

Can't guarantee it works yet, so use at your own risk. It's hosted on a pretty powerful server, dual E5-2620 and 64GB RAM

WAY better stale rate than other shitty p2pools. about 20% in my client. You have a link for figuring out my stale/reject on the server side? still don't quite understand p2pool so good.

hit the -I 18 - you`ll see )))

[Extornia]

Pool list is up and running: http://cnc.strament.com/poollist.php


Pool owners:
If you would like me to make changes private message me with what to change

If you would like to have your pool added, PM me with the following:

Pool name
Pool type
Pool fee
Pool website
Pool location

[donjonson]

I've been mining all night at about 700kh (my average on LTC was 1200) and I just got 4 CNC! My daily estimate is 120-150. What happened?
Thanks

[sicnezz]

I have so many stales, seems like sth is wrong with the network

[phorensic]

My hashrate is the same since I started and I'm getting paid less and less at the pushpool pool's.  It seems I get disconnected every couple of minutes and my cgminer is constantly switching between pools and even local when all my pools go down.  This has caused me to make 4x less than I did 48 hours ago.  Not sure if p2pool's are better because the DOA/Orphan percentages are like 40%+?? Seems horrible.

[JahPowerBit]

New Pushpool/mmcFE pool:

url: http://chn.imineco.in/
mining port: 8336
pool fee: 0%
server:  EU dedicated server (Intel Core i5-2400 3.4GHZ - 16 Go DDR3 - 2x 2To SATA2 - 100 Mbps)

It's a beta version and need more test to be fully operational.

Here my setting for pushpoold. I'am not sure that the best settings for CHNCoin. Help is welcome! Thank you :

"longpoll.disable" : false,
"rpc.target.rewrite" : true,
"work.expire" : 20,
"roll.ntime.disable" : true,
"longpoll.keepalive" : 20

the second point i'am not sure, it's the hashrate calculation by mmcFE. Here the code used :

$retarget = 18;
$hashrate = $resultrow->id;
$key = bcpow(2,$retarget) or die("bcpow err");
$hashrate = round((($hashrate*$key)/600)/1000, 3);

Thanks for your help to make this pool fully operational !!

[carebear]

I helped set up this pool. It is not mine per se, but the owner cannot post here so he asked me to do it.

CNC p2pool: http://192.162.112.138:8109

Fee: 1%

connect with your miner: cgminer -o 192.162.112.138:8109 -u <payoutaddress> -p <WhateverUwant>

Helpful: http://192.162.112.138:8109/static/graphs.html?Hour

p2pool rate: 203MH/s

If you are from europe, this is the pool to use.

No matter what your mining speed is, you should start seeing rewards in your CNC wallet 1-2 hours after starting to mine.
This pool is connected to a few other pools, so we already have 200 M/hash/sec, so we're finding blocks pretty often.

And since there aren't that many people onto here, the connectivity is very good since the server is not overloaded ^_^

Add this to the OP

[gritter]

I setup another fast pool, see thread https://bitcointalk.org/index.php?topic=195793

CHNCoin P2Pool Server:
http://cnc.crabdance.com:8400

• located in US Central on a low latency 1Gbit link
• based on latest 11.4 P2Pool
• 4 Cores, 16GB Server, currently at 1% load only
• connects to blastbob's P2Pool network
• low stales/DOA
• nicer interface based on P2PoolExtendedFrontEnd
• 3% Fee

Mining User: Your CHNCoin Address
Mining Pass: Anything

cgminer example:

cgminer --scrypt -o cnc.crabdance.com:8400 -u yourCNCaddress -p x -s 1 --expiry 1 --gpu-threads 1 --queue 0

cudaminer example:

cudaminer -o cnc.crabdance.com:8400 -u yourCNCaddress -p x

cpuminer example:

minerd -o cnc.crabdance.com:8400 -u yourCNCaddress -p x

[RobRoy]

Restart p2pool.web2go.hu

add more cpu and ram

connect cgminer :

cgminer --scrypt -o p2pool.web2go.hu:8400 -u yourCNCaddress -p x -s 1 --expiry 1 --gpu-threads 1 --queue 0

please check DEAD ARRIVAL

[LeftToeCut]

Added another p2pool server :

http://91.123.200.110:8800 , 1.5% fee.

[LeftToeCut]

Does p2pool speak ipv6 by the way? Two of my servers have a native ipv6 connection.

[akabane]

You can add https://bitcointalk.org/index.php?topic=195857.0 to the list

[phorensic]

I setup another fast pool, see thread https://bitcointalk.org/index.php?topic=195793

CHNCoin P2Pool Server:
http://cnc.crabdance.com:8400

• located in US Central on a low latency 1Gbit link
• based on latest 11.4 P2Pool
• 4 Cores, 16GB Server, currently at 1% load only
• connects to blastbob's P2Pool network
• low stales/DOA
• nicer interface based on P2PoolExtendedFrontEnd
• 3% Fee

Mining User: Your CHNCoin Address
Mining Pass: Anything

cgminer example:

cgminer --scrypt -o cnc.crabdance.com:8400 -u yourCNCaddress -p x -s 1 --expiry 1 --gpu-threads 1 --queue 0

cudaminer example:

cudaminer -o cnc.crabdance.com:8400 -u yourCNCaddress -p x

cpuminer example:

minerd -o cnc.crabdance.com:8400 -u yourCNCaddress -p x

Liking this pool at the moment.  Much better than the pushpool offerings.

[LeftToeCut]

In case p2pool is ipv6 aware -

http://188.95.224.183:8800 is also 2a00:16d8:2:300:8d5a:fb94:15f8:337a

[phrozenspite]

Can.mnlan.net shut down(won't even go into payout problems) I think you should remove that one

[carebear]

Can you put my pool in the first post?

It should have around 90-95% mining efficiency.

CNC p2pool: http://192.162.112.138:8109

Fee: 1%

connect with your miner: cgminer -o 192.162.112.138:8109 -u <payoutaddress> -p <WhateverUwant>

Helpful: http://192.162.112.138:8109/static/graphs.html?Hour

p2pool rate: 203MH/s

If you are from europe, this is the pool to use.

No matter what your mining speed is, you should start seeing rewards in your CNC wallet 1-2 hours after starting to mine.
This pool is connected to a few other pools, so we already have 200 M/hash/sec, so we're finding blocks pretty often.

And since there aren't that many people onto here, the connectivity is very good since the server is not overloaded ^_^

After mining for 2-3 hours you should see something like this in your wallet: https://i.imgur.com/nly7090.png

[de_xt]

There's a new push pool: http://technocoma.co.uk/

Here's the announcement thread: https://bitcointalk.org/index.php?topic=195833.0