[GB] USB ASIC miner - closed and completed

[PsychoticBoy]

I recieved my miners today

Thanks yxt for the fast service.

[yxt]

Let us know if they do! Many thanks

picked up... 

Registered mail go out on Monday.
Makes no difference. Would have been picked up from there on Monday too....

[minter12345]

Received my 4 today in UK.  Thank you very much YXT, its been a pleasure.

[fydel]

Short performance update w/ bfgminer (16h):

After a little bit more than 16h running 5 of the USB ASICs, bfgminer reports less than about 290 Mh/s for each and so 1450 Mh/s in total.
But when I compare the hashing power to a well known setup/performance of 2 Ztex boards, the extrapolated performance is 1646Mh/s.

@trepex
dreh den Hub mal um, damit du die Kühlkörper anbläst

Did follow yxt advise and have you turned over the usb for better air flow?

I have eleven running since yesterday and all are still over 333 MH/sec.

[trepex]

Hello,

first of all I want to thank yxt for organizing this whose group buy.
He did a great job!

Did follow yxt advise and have you turned over the usb for better air flow?

I have eleven running since yesterday and all are still over 333 MH/sec.

I did not turn the HUB - I love to see the green LEDs blinking  
The airflow with that ventilator you see here (even running on low speed) seems to be good enough.

So here you can see the current setup - I still did not get rid off the Win8 notebook.
The HUB is not perfect but at least it's working. Has only 2A power supply so I placed only 3
of the USB ASICs to it. I am getting >1825 Mh/s at 64W power.
The plan is to get the ASICs working on the Mac Mini as well. I will also get 2 more ASICs the
next week.

http://postimg.org/image/9lwz6j1iz

I keep geeting 330Mh/s with a little bit less than 1% HW errors.

Ralf

[fydel]

I did not turn the HUB - I love to see the green LEDs blinking  
The airflow with that ventilator you see here (even running on low peed) seems to be good enough.

Ahh. Ok. I got you wrong then. I thought you had problems with the hashrate dropping under 300 MH/sec because of heat problems.

[trepex]

I did not turn the HUB - I love to see the green LEDs blinking  
The airflow with that ventilator you see here (even running on low peed) seems to be good enough.

Ahh. Ok. I got you wrong then. I thought you had problems with the hashrate dropping under 300 MH/sec because of heat problems.

It had been a problem with the statistics inside of bfgminer. Only at long term statistics.

[ct1aic]

http://postimg.org/image/9lwz6j1iz

Greetings.

What are number 5 and numbers 6 & 7?

[alibert]

Im looking forward to yxt's next group buy

[yxt]

I work with friedcat on a solution, which eliminates the need for additional groupbuys 

[madmax_ger]

I work with friedcat on a solution, which eliminates the need for additional groupbuys 

dann aber zu besseren kursen, oder? 

[yxt]

So lange kein anderer Hersteller liefern kann wird friedcat an den Preisen wohl nichts ändern.
Klassisches Monopol.

[stepkrav]

yxt, in case you contact DHL again, can you ask them estimated time of delivery for packages outside germany? Thank you.

[yxt]

yxt, in case you contact DHL again, can you ask them estimated time of delivery for packages outside germany? Thank you.

depends on delivery country, in your case:

Runtime orientation standard (Weekdays) 10

[stepkrav]

Runtime orientation standard (Weekdays) 10

oh. ok thanks.

[Bembelrocker]

Parcel tracking# (V1-V4)  up to #94 are out by mail

Bembelrocker = #98       

[trepex]

What are number 5 and numbers 6 & 7?

These are FPGAs:

5: Ztex 1.15b (currently running at 96Mh/s)
6 & 7: Ztex 1.15x (220+212Mh/s)

Ralf

[ct1aic]

What are number 5 and numbers 6 & 7?

These are FPGAs:

5: Ztex 1.15b (currently running at 96Mh/s)
6 & 7: Ztex 1.15x (220+212Mh/s)

Ralf

Thanks for the info, Ralf.

[trepex]

Hi,

I made some small progress... I am currently mining on a MacBook Pro running OS X 10.7.5.
But... only using Win XP running in a Parallels 7 environment.
There I installed the 3.0.2 bfgminer (32 bit version) and the CP210x drivers:
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

Next step for tomorrow: Copy the VM to the Mac Mini and try it with all 4 USB ASICs and the Ztex
Boards (running natively on OS X).

Ralf

[wo0x]

I work with friedcat on a solution, which eliminates the need for additional groupbuys 

Cool, ich hab schon an dich gedacht, derweil die im ASICMiner Hauptthread philosophieren, wie das weitergehen kann. Ich fänds gut, wenn sich jemand aka DU für als Distri für Deutschland, Europa oder EMEA findet. Evtl. hast Du dich ja auch schon mit SebastianJu connected...(!?!)

Auf der anderen Seite wollen alle immer haben, aber mal auf die Idee, selbst einen Groupbuy zu starten, kommt ooch keener

----

yxt, check mal bitte diesen DHL-Link, den Du mir PM geschickt. Bis gestern war der auf "Sendungsdaten digital übermittelt", heute früh ist er auf

DHL Sendungsverfolgung

Hinweis
Ihre Suche ergab leider keine Treffer.

Ich hab irgendwo mal was von Leipzig gelesen ... ist das nur der Flughafen für den Import gewesen oder wohnst Du da in der Nähe? Abholen wäre dann in meinem Fall wesentlich schneller...