[GB] USB ASIC miner - closed and completed

[ewibit]

Sowas mit 10 Ports fehlt noch :\ na mal sehen..

naja, der hat 10 Ports UND 5 A!
http://www.pcmag.com/article2/0,2817,2417216,00.asp

[rupy]

I get 1% HW too, without heatsink.

Top mounted 8x8mm heatsink with real paste is the solution!

[yxt]

HW with your new heat-sink?

[eiswuerfel]

Habe heute meine Miner bekommen. Habe mal einen zum testen angeschlossen. Ist das normal das die nach ein paar Minuten so heiß werden das man die Miner kaum noch anfassen kann?

[CumpsD]

Habe heute meine Miner bekommen. Habe mal einen zum testen angeschlossen. Ist das normal das die nach ein paar Minuten so heiß werden das man die Miner kaum noch anfassen kann?

Yes.

[yxt]

ja, ich kann sie mir meinen zarten Händen gar nicht mehr anfassen 

[rupy]

HW with your new heat-sink?

Just ordered, what HW are you guys with proper cooling having? 0%?

[yxt]

no, also 1%

[Bembelrocker]

Ein herzliches Dankeschön an yxt für die komplette Abwicklung des Gruppenkaufs.
Mein Stick ist auch heute endlich gut verpackt angekommen ! 

[malin]

I have problem with this,

when i try sudo modprobe cp210x vendor=0x10c4 product=0xea60
i take the error: ERROR: could not insert 'cp210x': Invalid argument


;/ and idk what ia hve to do on my raspberry ;/

Finally got mine!

Code:

 AMU 0:                | 334.7M/328.5Mh/s | A:45 R:0 HW:1 U:5.44/m

It's actively cooled, and alone on a USB hub with two power sources. So I doubt you can do better regarding HW errors (unless the heatsink is really bad?).

Linux users with their own kernel setup should compile/load the cp210x kernel module.

[alibert]

Use cgminer 3.2.1

[malin]

tnx, I will try

[malin]

But, I think it desn;t work, becose i don;t see any USB device when use command ls /dev/ ant TTYUSB ;/
when i use llusb I have it,  ;/

[malin]

k, so now i will download cgminer 3.2.1 and compile it, and paste results

[malin]

so, after install cgminer 3.2.1,

after when I run they exit without any error ;/

[rupy]

https://bitcointalk.org/index.php?topic=191729.msg2024951#msg2024951

[malin]

yes

Did you compile with --enable-icarus?

[Maciek]

Received my USB ASICs (thanks!).

But I have a problem with those USB / COM drivers...





Probably I did something wrong?

My system is Windows XP / Windows 7 = both with the same problem...
Any ideas how to help? I would like to support the BTC Network

[malin]

Here is ./bfgminer -o stratum+tcp://stratum.bitcoin.cz:3333 -O user:pass -S icarus:/dev/ttyUSB0

but i don;t have  /dev/ttyUSB0

https://bitcointalk.org/index.php?topic=191729.msg2024951#msg2024951

[nottm28]

Received my USB ASICs (thanks!).

But I have a problem with those USB / COM drivers...

... edit ...

Probably I did something wrong?

My system is Windows XP / Windows 7 = both with the same problem...
Any ideas how to help? I would like to support the BTC Network

I used yxt's instructions https://bitcointalk.org/index.php?topic=195037.msg2299251#msg2299251

1) download cgminer-3.1.1

2) install the windows driver (in yxt's link)

3) plug in the usb and note the COM port it sits on

4) create a windows batch file (slush.bat) and enter similar to this:

C:\cgminer-3.1.1-windows\cgminer.exe --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S //./COM3 -S //./COM4 -o http://stratum.bitcoin.cz:3333 -u USERNAME -p PASSWORD