nu1mlock (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2017, 07:15:08 PM |
|
Hello,
If I buy EVGA G2 650 to power the motherboard and 2x risers and also buy a 2400W server PSU to power all GPU's and 4x risers, will there be a problem?
Can I mix powering the risers from two different PSU's or do I need to power them from the same PSU?
If I need to power them all from the same PSU, can I power them using the small PSU (motherboard and risers) or do they need to be powered from the same PSU as the GPU's?
Thank you
|
|
|
|
Jamievs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2017, 07:17:03 PM |
|
Why would you do that... you can power the riser and the gpu with one cable + a splitter....
|
|
|
|
nu1mlock (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2017, 07:21:11 PM |
|
Why would you do that... you can power the riser and the gpu with one cable + a splitter....
I was under the impression that it is preferred to use one cable per riser.
|
|
|
|
Vann
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2017, 07:22:49 PM Last edit: June 05, 2017, 07:42:43 PM by Vann |
|
I recently upgraded to a dual power supply setup which had me researching on how to connect them safely. I came across posts suggesting powering the riser and PCI-E power connector on the card with the same PSU. Others say the psu that powers the motherboard must also power alll the risers. The slave psu should only power the PCI-E power connector on the cards. https://bitcointalk.org/index.php?topic=1761303.msg17825999#msg17825999https://bitcointalk.org/index.php?topic=1843586.msg18351224#msg18351224Ultimately, I did follow the latter suggestion as it seems logical the same power supply that powers the motherboard should also power the risers connected to the PCI-E slots on the motherboard. The second slave power supply only powers the 6 & 8 pin auxiliary power connector on the video cards. According to another post I came across that connecting the PSU's that way ensures they share the same ground, which is important. https://bitcointalk.org/index.php?topic=443540.msg4878774#msg4878774I also noticed BBT in his latest live stream set up a 9 card dual PSU rig and also explained that when setting it up, you need to power the risers with the same PSU that powers the motherboard and only use the second PSU to power the GPU's. https://youtu.be/pQ-EAunoAqY?t=988
|
|
|
|
iamnoobplzhelp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2017, 09:29:21 PM |
|
2400w is way more than enough power for 6 cards. You could get away with half of that.
Personally, I use a 1200w server PSU for the cards + risers. Then I use a 300-500w psu (whatever is cheapest) to power the board and SSD.
Also, in terms of the picture above, I have definitely done that before and have had no issues with it.
|
|
|
|
nu1mlock (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2017, 09:38:00 PM |
|
2400w is way more than enough power for 6 cards. You could get away with half of that.
Personally, I use a 1200w server PSU for the cards + risers. Then I use a 300-500w psu (whatever is cheapest) to power the board and SSD.
Also, in terms of the picture above, I have definitely done that before and have had no issues with it.
Well it might not be enough for 6x 1080 Ti cards.
|
|
|
|
oup59
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 06, 2017, 11:44:38 AM |
|
There are differing ideas on powering the risers and GPUs with dual PSU with respect to using/not using sata adapters, more than one riser on same sata/molex channel and etc.
So far:
I have 2 Evga 850 G2 and here is my setup. Each has 4 VGA cables. (2 x (6+2) Pins and 2 x(6+2)+ 6 Pins) and 1 Perip (4 Pin Molex)
I have several risers such as 6 Pin PCIE powered and 4 pin Sata powered.
I aimed to power riser with 6 Pin PCIE as much as I can and then 4 pin molex to avoid sata.
PS1: Master.Powers system. 4 pin molex channel of PS_1 is used to connect add2Psu with PS2 PS2: Slave
In summary:
PS_1: Powers 3 risers and 3 GPUs PS_2: Powers 2 risers and 3 GPUs.
GPU_0 pluggged into mobo directly and powered by PS_1 PCIE (6+2) Pins.
GPU_1 on riser. Both riser and GPU_1 are powered as: PS_1 PCIE (6+2) pin to GPU and PCIE 6 Pin to Riser with 6 Pin Male/Female Extension.
GPU_2 on riser. Both riser and GPU_2 are powered as: PS_1 PCIE (6+2) pin to GPU and PCIE 6 Pin to Riser with 6 Pin Male/Female Extension.
GPU_3 on riser. Riser is powered as: PS_1 6 pin (of 6+2 Pin) PCIE cable. GPU_3 on this riser is powerd by PS_2 6+2 Pin VGA Cable. This is the only cross riser/GPU in my setup.
GPU_4 on riser.Both riser and GPU_4 powered as: PS_2 PCIE (6+2) pin to GPU and PCIE 6 Pin to Riser with 6 Pin Male/Female Extension.
GPU_5 on riser. Both riser and GPU_5 are powered by PS_2 as riser is powered by 4 pin molex of PS_2 and GPU_5 is powered with PCIE 6+2 Pin.
This setup leaves me one available VGA on PS2 but I have one missing (6+2)+ 6 Pins VGA cable. I contacted Evga for this and waiting for a response. When/if I get missing cable I can change cross riser/gpu connection too.
This sounds complicated. I can power oll the risers from main PSU only if I use sata/molex extension cable(s) only.
System runs fine so far.
I am open to suggestions for better power connectivity if I am doing something really bad.
|
|
|
|
nu1mlock (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 01:24:15 AM |
|
I'm having some issues now because pretty much ALL power supplies at 1000W or more are sold out all over Sweden, UK and Germany. So I'm now thinking about powering rigs using 2x 850W PSU's. Your image suggests that the risers needs to be powered by the same PSU that powers the motherboard (for some reason). Would it be okay to power the rig like this: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F4htOUBm.png&t=665&c=RKDTRjoA2wx0KA) That way all risers are powered by the same PSU as in your image. However, that PSU also powers one GPU. The second PSU would only power the remaining five GPU's. On the other hand I'm reading a lot of different answers. A lot of people are saying that they're dividing the power with one PSU powering 3 risers and 3 GPU's (and the second the rest + motherboard) while others say that you can't do that (though I can't find a single post properly explaining why). So many different opinions and answers.
|
|
|
|
Vann
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 01:34:38 AM |
|
I'm having some issues now because pretty much ALL power supplies at 1000W or more are sold out all over Sweden, UK and Germany. So I'm now thinking about powering rigs using 2x 850W PSU's. Your image suggests that the risers needs to be powered by the same PSU that powers the motherboard (for some reason). Would it be okay to power the rig like this: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F4htOUBm.png&t=665&c=RKDTRjoA2wx0KA) That way all risers are powered by the same PSU as in your image. However, that PSU also powers one GPU. The second PSU would only power the remaining five GPU's. On the other hand I'm reading a lot of different answers. A lot of people are saying that they're dividing the power with one PSU powering 3 risers and 3 GPU's (and the second the rest + motherboard) while others say that you can't do that. So many different opinions and answers. Yes, you can power the VGA inputs from different PSU's. What's important is that all the risers are powered by the same PSU that powers the motherboard. BBT has built more rigs than many of us put together and in several of his videos he adamantly says you MUST set up multiple PSU rigs that way. Otherwise you will create ground loops. The links in my post also explain why you need to set it up that way.
|
|
|
|
oup59
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 06:15:50 AM |
|
Yes, you can power the VGA inputs from different PSU's. What's important is that all the risers are powered by the same PSU that powers the motherboard. BBT has built more rigs than many of us put together and in several of his videos he adamantly says you MUST set up multiple PSU rigs that way. Otherwise you will create ground loops. The links in my post also explain why you need to set it up that way.
I an inclined to believe it is true, at least more preferable when possible as in the new rig I am setting up one of the GPUs on riser powered slave other psu threw code 43 out of blue after running some time. Card runs by itself on my test system, card runs when it is powered from master psu with other risers but did not when powered from slave psu. It looks like powering risers from different PSUs can/may run but rig is not stable. I will change all setup to what is suggested here. Lets see if it will be better.
|
|
|
|
nu1mlock (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 08:16:14 AM |
|
Does anyone know how power from risers/cables are distributed? I mean, let's say a 1080 Ti uses 250W and has one 8-pin and one 6-pin.
Will it draw 225W from the cables and the remaining 25W from the risers or will it be pulling 75W from the risers at all times and the remaining 175W from the cables? Or perhaps something else?
|
|
|
|
dragon123
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 09:10:44 AM |
|
Does anyone know how power from risers/cables are distributed? I mean, let's say a 1080 Ti uses 250W and has one 8-pin and one 6-pin.
Will it draw 225W from the cables and the remaining 25W from the risers or will it be pulling 75W from the risers at all times and the remaining 175W from the cables? Or perhaps something else?
Tom's Hardware reviews show load on motherboard slot for various 1080ti.
|
|
|
|
MA3A
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 241
Merit: 100
To Hash or not to Hash, that's what the question
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 06:28:43 AM |
|
Tom's Hardware reviews show load on motherboard slot for various 1080ti. - got link for this?
|
|
|
|
chup
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
![](https://bitcointalk.org/Themes/custom1/images/post/lamp.gif) |
June 25, 2017, 07:30:42 AM |
|
Using for years without issue two PSU setup connection marked at Your drawings as "not correct". My opinion is opposite, of course: - I know for sure that there is no power connection between motherboard and riser. Therefore I can freely use different PSUs for motherboard and GPUs. - I don't know for sure is there power connection in GPU between it's PCI-e slot and PCI-e power connectors. So I don't mix PSUs to power riser and power connectors on single GPU.
|
|
|
|
dragon123
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 01:47:32 PM |
|
|
|
|
|
Vann
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 02:08:10 PM |
|
Using for years without issue two PSU setup connection marked at Your drawings as "not correct". My opinion is opposite, of course: - I know for sure that there is no power connection between motherboard and riser. Therefore I can freely use different PSUs for motherboard and GPUs. - I don't know for sure is there power connection in GPU between it's PCI-e slot and PCI-e power connectors. So I don't mix PSUs to power riser and power connectors on single GPU.
You are wrong. I checked the outer pins on the USB cable that connects to the riser from the 1x PCI-E slot with a multiimeter. There was 3.3V coming from the motherboard. There is also a ground connection between the riser and the motherboard.
|
|
|
|
chronek
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 273
Merit: 250
BD People Are Legend
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 25, 2017, 02:29:47 PM |
|
for me both cases worked, but i always used usb powered risers, - powered usb risers cut 12v and 5v between pci-e and riser, so card not stress pci-e slot - if you connect 2 psu to one gpu card (like one to riser and second to erxternal connector) then both psu are grounded together, because grounds are connected in gpu - you have to connect with grounds, so there is not voltage potential between both psu and will be no other voltage potential than signal in connection between gpu and motherboard - usb powered risers have ground connected between pci-e adapter and riser, any connection would ground psu together
|
|
|
|
jajamelony
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 27, 2017, 01:10:49 PM |
|
Yes, you can power the VGA inputs from different PSU's. What's important is that all the risers are powered by the same PSU that powers the motherboard. BBT has built more rigs than many of us put together and in several of his videos he adamantly says you MUST set up multiple PSU rigs that way. Otherwise you will create ground loops. The links in my post also explain why you need to set it up that way.
After 5 days of trying to get my 8 GPU rig working by splitting riser power evenly among two PSUs I finally switched and powered all 8 risers with the Master PSU (that is powering the motherboard) and MAGIC HAPPENED! it all started to work... So what is said above is 100% true and highly recommended. The other issue I had is my SLAVE 850w PSU is not sufficient to power 6 cards (I have 2 GPUs powered by MASTER, 6 by SLAVE). Interestingly I built this rig based on a Youtube video where a guy is using 8 Red Devils on two 750w EVGAs and he is splitting both the riser and video card power evenly. I bumped my PSU wattage to 850 x 2 just to be safe when I built my version of it and it is still way insufficient to power 4 cards on the MASTER. Somehow it works for him, but we can't really tell from the video how long that arrangement actually lasted ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) jaja
|
|
|
|
Spoopy
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2018, 02:05:08 AM |
|
Using for years without issue two PSU setup connection marked at Your drawings as "not correct". My opinion is opposite, of course: - I know for sure that there is no power connection between motherboard and riser. Therefore I can freely use different PSUs for motherboard and GPUs. - I don't know for sure is there power connection in GPU between it's PCI-e slot and PCI-e power connectors. So I don't mix PSUs to power riser and power connectors on single GPU.
You are wrong. I checked the outer pins on the USB cable that connects to the riser from the 1x PCI-E slot with a multiimeter. There was 3.3V coming from the motherboard. There is also a ground connection between the riser and the motherboard. I'm pretty sure the riser is creating that 3.3V from its power, if it's a newer riser, and if the usb has a ground in it going to the mobo, wouldn't that also ground the PSUs together? If you do a PSU on the gpu and a different PSU on the riser, you might have 12V rails fighting if they are not exactly the same and that could cause a fire, right? Here is an experienced engineer talking about this: https://forum.z.cash/t/the-facts-about-gpu-mining-electrical-specifications/19468
|
|
|
|
Vann
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2018, 02:42:19 AM Last edit: February 18, 2018, 03:25:46 AM by Vann |
|
Using for years without issue two PSU setup connection marked at Your drawings as "not correct". My opinion is opposite, of course: - I know for sure that there is no power connection between motherboard and riser. Therefore I can freely use different PSUs for motherboard and GPUs. - I don't know for sure is there power connection in GPU between it's PCI-e slot and PCI-e power connectors. So I don't mix PSUs to power riser and power connectors on single GPU.
You are wrong. I checked the outer pins on the USB cable that connects to the riser from the 1x PCI-E slot with a multiimeter. There was 3.3V coming from the motherboard. There is also a ground connection between the riser and the motherboard. I'm pretty sure the riser is creating that 3.3V from its power, if it's a newer riser, and if the usb has a ground in it going to the mobo, wouldn't that also ground the PSUs together? If you do a PSU on the gpu and a different PSU on the riser, you might have 12V rails fighting if they are not exactly the same and that could cause a fire, right? Here is an experienced engineer talking about this: https://forum.z.cash/t/the-facts-about-gpu-mining-electrical-specifications/19468It doesen't matter if the risers are newer or not. Instead of saying you think you're 'pretty sure', do what I did. While the motherboard is on, get a mulitimeter and measure the voltage on the outer pins of the USB connector coming from the motherboard that plugs in to the back of the riser. If you do that, you will see there is 3.3V coming from the motherboard through the USB cable connected to PCI-E slot. Which means that supposed 'electical enginner' saying there is NO power connection between the riser and the motherboard is false. There is 3.3V coming from the motherboard to the riser though the USB cable. This post explains why you need to power the risers from the same PSU that powers the motherboard, so the signal voltage and ground is set in refrence to the primary PSU which is also powering the PCI-E lanes on the motherboard. https://bitcointalk.org/index.php?topic=443540.msg4878774#msg4878774That is the suggestion I took and all of my dual/triple PSU rigs are setup up where all of the risers are connected to the primary PSU connected to the motherboard and I only use the secondary PSU's for VGA power inputs on the cards. I've been dual mining 24/7 for close to 10 months without any problems, so for me that is the best way to setup multiple PSU rigs.
|
|
|
|
|