[SCAM] New CNC p2pool released. Very low stales & fast connectivity.

[carebear]

Mod Edit: This is another scam pool, 100% fee, use at your own risk

I helped set up this pool. It is not mine per se, but the owner cannot post here so he asked me to do it.

It should have around 90-95% mining efficiency.

CNC p2pool: http://192.162.112.138:8109

Fee: 1% (or 100% - mod note.)

connect with your miner: cgminer --scrypt -o 192.162.112.138:8109 -u <payoutaddress> -p <WhateverUwant>

Helpful: http://192.162.112.138:8109/static/graphs.html?Hour

p2pool rate: 401MH/s

Current pool rate: 170MH/s
Current Efficiency: 97.51%

If you are from Europe, this is the pool to use.

No matter what your mining speed is, you should start seeing rewards in your CNC wallet 1-2 hours after starting to mine.
This pool is connected to a few other pools, so we already have 200 M/hash/sec, so we're finding blocks pretty often.

And since there aren't that many people onto here, the connectivity is very good since the server is not overloaded ^_^

After mining for 2-3 hours you should see something like this in your wallet: https://i.imgur.com/nly7090.png

VERY IMPORTANT: Make sure your payout address shows up in here: http://192.162.112.138:8109/static/graphs.html?Day . Otherwise it means you're doing something wrong and you will not receive any payouts.

[spoid]

looks like your LAN address.

/edit/ nope, actually a working pool now guys.

[Tornate]

192.162.112.138

Thank you mate! Put all my 20,000 kh/s to your pool! Cheers!

[carebear]

Pool should be back online in 5 minutes. Fixed some of the issues regarding stales.

[carebear]

You should have around 90-95% mining efficiency.

[carebear]

Can I get some feedback? How is it working?

[carebear]

Looking great xD

Shares: 1 total (0 orphaned, 0 dead) Efficiency: 152.2%

[carebear]

Going strong:

Shares: 3 total (0 orphaned, 0 dead) Efficiency: 151.5%


Should be more efficient than most of the pools out there since this is a strong server.

[Mushoz]

How did you manage to connect to other p2pool nodes? I'm trying to run my own p2pool instance, but it won't connect to the p2pool network. I'm using this P2Pool fork: https://github.com/chrda/p2pool-chncoin

Would you mind sharing your source code? Thank you very much in advance!

[spoid]

may I ask where the server is located so I can estimate whether I should actually check out the stalerate?

[hanzac]

Thank u, I think the efficiency is very good.

[tex83rb]

yes, it's working very good. 15 accepted and 14 accepted in few minutes on 2 7970.

but can you tell me how the payment system is done?

every block found? or every round? how much time it requires for first payment? and later, how many time i will get the payments?

[DragonDNS]

I am mining for three hours now and see no payouts yet. Are there any problems?

[carebear]

Look here: http://192.162.112.138:8109/static/graphs.html?Hour

If you see your payment address on there, it means it is working.

Normally payouts are expected to come after 2-5 hours of mining. But more realistically it should be around 3 hours.

You will see something like this in your wallet: https://i.imgur.com/nly7090.png .

The pool works, I just got my first payments ^_^

Also we're going at 10 M/hash/sec

If we were to get a little more people mining that'd be great

[carebear]

Did anybody get any payouts yet?

[carebear]

Bumpity bump.

We're at 20 M/hash/sec ^_^

[carebear]

Update:

40 m/hash/sec and climbing!

[carebear]

60 m/hash/sec and going up

[duketogo]

Chugging away nicely thus far. Well done! 

[carebear]

Thank you