bigassboy
|
|
June 08, 2017, 03:19:33 PM |
|
the B1 has issues in heat and it will fry the PSU. I swapped only B1 PSU for a different PS and there are no problems
If you fried your B3 its because of that shitty power inverter you have. I have not had issues at all with them.
Not saying they are great, but they are ok.
The pandaminer distributor sold the transformer to me with the panda, for the record. How would I have fried it and if so how does a fried rig operate? That's why i said IF YOUR fried it. You have a picture of a fried board on your first post. These "distributors" are idiots btw. Don't take anything they tell you as the truth hehe. I took his advice with a grain of salt but it appears he only became a distributor to fill his mining farm in china with well over 100 pandaminers Pandaminer problem #27 Received a different pandaminer model today b3+ as well? It's only recognizing 6 gpu's . . . out of the box I have the same problem as well, managed to contact pandaminer for assistance and they were quick to help me diagnose the problem. Turns out one of my GPU is faulty. I sent back the GPU to them and hoping to get a new replacement soon..
|
|
|
|
dagarair
|
|
June 08, 2017, 03:50:30 PM |
|
open and replug them all in. Some do get loose in shipping. That being said you have a gen 1 panda b3 like mine. the new ones are 5 fans front and 4 back. You will have heat problems if you live in a hot environment.
|
|
|
|
VoskCoin (OP)
|
|
June 08, 2017, 05:27:10 PM |
|
Don't they have like a 6 month warranty for those things? I guess the miner catching on fire whould be covered by that Yeah w/ you covering shipping and I'm a second hand owner of both so I imagine they may use that to shrug off support even though one was purchased directly from their distributor Here's my latest issues with my second pandaminer https://youtu.be/PIwmfx8KjqYNote its a different version dagarair reports it as a gen 1 b3+ whereas my other panda is a gen 2 b3+ I'm assuming -- its a newer version This psu has more splitters than needed . . Much quieter and lower tone, still a very loud miner but nothing in comparison to the "gen 2 pandaminer" only getting 6x gpu recognized
|
|
|
|
dagarair
|
|
June 08, 2017, 06:23:59 PM |
|
put your finger on the cards after about 20 min. You will know what 2 cards are not running. Pull them and swap positions with working cards and see if the problem follows the card. If it does you have 2 dead cards.
|
|
|
|
bentcrypto
|
|
June 08, 2017, 07:47:26 PM |
|
Dam...I didn't know smOS doesn't work with the B3. I already sent drives pre-loaded to the hosting company. Thanks for the heads up. Hopefully Eliovp will come to the rescue. I refuse to use windows!
What batch are your pandas from? Agreed, I feel Eliovp is the only one who can save these damn pandas lol Hope yours workout better than mine has thus far! Mine are from March batch (B3) . Took forever to get delivered and now hosting company sitting on them for weeks. Trying not to lose my shit. Valuable lessons learned: Never pre-order (time is money!!) Never rely on others. Build and manage your own rigs. If I sat on my 12k BTC instead of buying the Pandas I would have more than doubled my $$$
|
|
|
|
kjs
|
|
June 10, 2017, 09:54:04 PM |
|
Don't they have like a 6 month warranty for those things? I guess the miner catching on fire whould be covered by that Yeah w/ you covering shipping and I'm a second hand owner of both so I imagine they may use that to shrug off support even though one was purchased directly from their distributor Here's my latest issues with my second pandaminer https://youtu.be/PIwmfx8KjqYNote its a different version dagarair reports it as a gen 1 b3+ whereas my other panda is a gen 2 b3+ I'm assuming -- its a newer version This psu has more splitters than needed . . Much quieter and lower tone, still a very loud miner but nothing in comparison to the "gen 2 pandaminer" only getting 6x gpu recognized Hi VoskCoin, Appreciate your reviews and have re-tweeted your YouTube videos, keep up the good work I have just received 20 of these PoS, 19 of which are running now, 1 of which is DoA. Do you know how to get them out of 'Chinese Windows 10' mode into English? Best Regards, KJS
|
|
|
|
VoskCoin (OP)
|
|
June 13, 2017, 03:55:06 PM |
|
So I have one pandaminer, the grey one
Main issue -- I have 7 cards running on it, however gpu 4 always crashes... how can I fix this?
Running on 240v I don't understand how you'd wire 220v here it's measured 248 or 246 with a meter
My research says oem panda PSU is rated up to 240v so that all falls in line with normal things
People are running oem panda PSU on 240v?
I don't have asm or dcri enabled still crashing
When I begin mining there is an audible drop in the tone / maybe speed of the fans ?
|
|
|
|
VoskCoin (OP)
|
|
June 13, 2017, 03:58:40 PM |
|
Don't they have like a 6 month warranty for those things? I guess the miner catching on fire whould be covered by that Yeah w/ you covering shipping and I'm a second hand owner of both so I imagine they may use that to shrug off support even though one was purchased directly from their distributor Here's my latest issues with my second pandaminer https://youtu.be/PIwmfx8KjqYNote its a different version dagarair reports it as a gen 1 b3+ whereas my other panda is a gen 2 b3+ I'm assuming -- its a newer version This psu has more splitters than needed . . Much quieter and lower tone, still a very loud miner but nothing in comparison to the "gen 2 pandaminer" only getting 6x gpu recognized Hi VoskCoin, Appreciate your reviews and have re-tweeted your YouTube videos, keep up the good work I have just received 20 of these PoS, 19 of which are running now, 1 of which is DoA. Do you know how to get them out of 'Chinese Windows 10' mode into English? Best Regards, KJS I will send you the links I used / helped, pm me your email wish I had time today to make you a quick video!
|
|
|
|
VoskCoin (OP)
|
|
June 13, 2017, 04:39:50 PM |
|
Pandaminer GPU's now crash when I go to mine. all cards recognized at least one will crash, always gpu4 then claymore goes to reboot and freezes Tried mining ZEC instead of one card crashing, 3 crashed / same freezing result
|
|
|
|
captaingeeky
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 13, 2017, 06:26:08 PM |
|
https://i.imgur.com/qsorcGrm.jpgmPandaminer GPU's now crash when I go to mine. all cards recognized at least one will crash, always gpu4 then claymore goes to reboot and freezes Tried mining ZEC instead of one card crashing, 3 crashed / same freezing result This sounds like my rig when i had a power issue. Add another PSU to the mix and see if you're just running out of juice.
|
|
|
|
VoskCoin (OP)
|
|
June 13, 2017, 06:46:38 PM |
|
Pandaminer GPU's now crash when I go to mine. all cards recognized at least one will crash, always gpu4 then claymore goes to reboot and freezes Tried mining ZEC instead of one card crashing, 3 crashed / same freezing result This sounds like my rig when i had a power issue. Add another PSU to the mix and see if you're just running out of juice. swapped panda shitbox psu for my other panda shitbox psu and now all cards are working, still way under where I'm supposed to be but .. you were absolutely right
|
|
|
|
captaingeeky
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 13, 2017, 11:00:39 PM |
|
Pandaminer GPU's now crash when I go to mine. all cards recognized at least one will crash, always gpu4 then claymore goes to reboot and freezes Tried mining ZEC instead of one card crashing, 3 crashed / same freezing result This sounds like my rig when i had a power issue. Add another PSU to the mix and see if you're just running out of juice. swapped panda shitbox psu for my other panda shitbox psu and now all cards are working, still way under where I'm supposed to be but .. you were absolutely right Invest in some server PSUs with breakouts. Deepinthemines has some on his shop and ebay. I've got HP PSUs that have been running at 90% for 3 years now. I upgrade the miners and keep using them. As far as the driver issues you are having, you might see if the OS has a rollback feature enabled. Disconnect it from the internet so it doesn't update when it boots. You can take it back to a time when the drivers were working. Also, whenever installing drivers: uninstall, restart, install, restart.
|
|
|
|
kjs
|
|
June 14, 2017, 01:20:46 AM |
|
I will send you the links I used / helped, pm me your email wish I had time today to make you a quick video!
Thanks, I actually just ditched the crappy pirated Windows 10 they supply with the units and installed EthOS instead.
|
|
|
|
Smuft
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 25, 2017, 07:13:30 PM |
|
How is ethOS working out for you?
anyone get their panda problems solver by using eliosvp's solutions?
|
|
|
|
VoskCoin (OP)
|
|
June 25, 2017, 07:40:15 PM |
|
How is ethOS working out for you?
anyone get their panda problems solver by using eliosvp's solutions?
eliovp is the only hope for those freaking panda miners lol, he has customer support, panda should hire him. https://youtu.be/s4_6WdIRSE0I haven't made an update video on my latest stuff but basically that one ended up working properly on a proper PSU w/ PandamOS
|
|
|
|
kjs
|
|
June 26, 2017, 12:23:39 PM |
|
How is ethOS working out for you?
anyone get their panda problems solver by using eliosvp's solutions?
eliovp is the only hope for those freaking panda miners lol, he has customer support, panda should hire him. https://youtu.be/s4_6WdIRSE0I haven't made an update video on my latest stuff but basically that one ended up working properly on a proper PSU w/ PandamOS Nice, I feel you're pain. Bought 20 of them and have had a few issues with flaky GPU's and their pirate Chinese Windows 10. Replaced Windows 10 with EthOS which fixed the OS issue. Next up is to replace the PSU's with 2400W Parallel Miner kits that I bought ( http://www.parallelminer.com/product/2400-watt-power-supply-kit-for-gpu-mining-94-efficiency-200-240v-ethereum-eth-zec-dash/). Each 2400W PSU has a 16 x 8-pin PCIe power outlet breakout board meaning you'll be able to power 2 x Pandaminers off each one once you under-volt and optimise the GPU BIOS and core clock-speed.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
June 26, 2017, 02:37:34 PM |
|
The oem psu is bad.
|
|
|
|
Smuft
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 27, 2017, 03:42:50 AM |
|
The oem psu is bad.
what's wrong with the OEM psu?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4256
Merit: 8551
'The right to privacy matters'
|
|
June 27, 2017, 04:40:10 AM |
|
The oem psu is bad.
what's wrong with the OEM psu? it has 5 pcie cables that come from the unit. they split into 7 cables. and the unit has 8 gpus. try and run 8 gpus with 5 cables = overload and melt downs. no one should use the psu for the panda miner it should be used on a low load item 800 watts max that would be 160 watts for each of the 5 cables that may be okay
|
|
|
|
jackcole
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 27, 2017, 07:46:56 AM |
|
Hey guys I put together a review video on my Pandaminer B3+ https://youtu.be/sefJNg8Bv5II saw some promising reviews and specs on the pandaminer gpu eth zec xmr mining rig, so I began my quest to attain one. . They were flying through their pre-orders in seconds / minutes selling 1000+ panda miners . . it was tough to acquire. I reached out to the Virginia Pandaminer Distributor and he was able to get me a panda miner however at the BTC price he wanted, I ended up paying about $3000 dollars for a Pandaminer B3+ at the end of May. Long story short some of these pandaminers are catching fire, going up in flames is ridiculous because their production was rushed and just cheap. You can read more about the latest panda miner fire here https://bitcointalk.org/index.php?topic=1946017.0My pandaminer worked for about a week before at this point my understanding is that windows updated and now does not recognize the GPU SMOS did not work for me and tytanick states he does not support pandaminers pandamOS by eliovp is promising however his current version did not work for me, he will begin working on a fix this weekend List goes on, watch the videos for full details, I do not recommend this miner. https://i.imgur.com/crPgCPx.pngI'll update later as I'm determined to make this thing work, any input on getting it running correctly would be more than welcome. Update Here is my second pandaminer . . I am also experiencing issues with this b3+ https://www.youtube.com/watch?v=1_UTgt9fbxgthanks for the review dude. I was looking at a pandaminer, because I wanted something "turn-key" and didn't want to futz with building/configuring a mining rig, but since they were sold out and wouldn't get here probably in another month, I got my 5x 1080 ti cards in, but then when I went to turn on my old motherboard/CPU I had from doing some Litecoin mining (back in early 2014 I believe) the bios wouldn't post....so I just spent another 300 bucks on motherboard, CPU, and ram.
|
|
|
|
|