|
May 06, 2013, 01:03:10 PM |
|
Theoretically you can pull 80% of a Gold PSUs continuous wattage rating, more or less forever - 'forever' is required when mining. So you've got a 680 watt PSU as far as mining is concerned. Unless the Corsair is Silver, which means 70-75% is your practical limit. slarow86 is right though - Corsairs really aren't top of the line. I never mined with less quality than a Cooler Master - and I did that (mined) from Q1 2011 through August of last year.
Those 7950s of yours max out at a bit over 200 watts each, if you clock them. So at the least, you need 1200 watts just for the cards (but don't forget the rest of your system). slarow86 is also right about running that kind of juice through your motherboard. Go to the Mining forum - you want two PSUs, with the second cross-connected on one rail and running just two or three of the cards off the motherboard bus. There's good instructions to be found on the forum.
Don't worry about the riser cables (n.b., get cables, not hard risers - the cables give you a lot more latitude when positioning your GPUs). If they work for five minutes, they'll work forever. I imagine bitcoinstore has good ones - it's one of Roger Ver's sites and I bought some from him on a different site of his a couple years ago.
In general, it sounds like you have some more in-depth research to do. Mining forum. Folks are generally helpful there.
|