[Group Buy] Licence Production Ztex FPGA - Canceled

[Chefnet]

like described in the German Board: https://bitcointalk.org/index.php?topic=102994.msg1986605#msg1986605 I have the possiblity to produce some more ztex 1.15y Boards. I have already done it in the past (last year look into the mentioned thread for more information or ask me for some more informations).

I'm sitting in germany and the board assembler 5km far away.

I have the opportunity for an offcut of 45-47 Boards with a delivery time about 4-6 weeks(from the time I can order the fpga chips > if order is filled next week). If the order can be filled up to over 40 boards I can produce them.

Price and other included things:
599€ per piece ($ look for the reference http://www.ecb.int/stats/exchange/eurofxref/html/index.en.html)
+ VAT (if inside the eu and you are no company with a valid vat id)
+ shipping (DHL, UPS, ...) what you choose

USB cable and psu can be ordered extra if you want

Terms:
- You order via a pm with your adress + mail + quantity and get a confirmation
- You have to pay 300€ after you get the invoice, with that money I have to pay the fpga chips (I have only the opportunity for cash in advance) and the rest befor shipping.
- ordering is possible till Sunday the 12. May, if the ordered number is under 42 boards I will cancel the complete order, otherwise your order is binding (payment after 12. May).
- Payment via: Cash, Paypal (+2-6% fee depends on the country where you live), BTC (Mtgox Average), bank transfer, MtGox Codes
- You get an invoice.
- this is a licence production of ztex 1.15y boards. The board is a original ztex board look here: http://www.ztex.de/usb-fpga-1/usb-fpga-1.15y-orderinfo.d.html


Picture from a board assembled 2012:

[ragingazn628]

buy*

[HerrDoktor]

Nice boards, so the expected MHash/s would be around 800 ? Right ?

[Kuma]

Yes. My experience with these boards is around 860 Mhash/s. Some are faster, some slower but this is average for me.

[twitami1]

Is this one of them?

http://www.ebay.com/itm/Bitcoin-miner-FPGA-/181133808692

And $250 shipping? LOLOLOL!!

[Chefnet]

thx @kuma for the message.
Yes that is a board like you see on Ebay.
800 MH/s is the normal it can be between 700 and 900.

@ragingazn628 you get a pm

[crazyearner]

Price needs to be less than currently is as theirs other company and other FPGA people now making and shipping for around $300 not 600 euro.

If you consider reducing price ill buy 10+ depending on price and shipping

[jdebunt]

half the price & i'll take 2, at this price...No thanks

[dan99]

half price in USD please

[Chefnet]

I want that too but there is no chance because with the prices I have a very small profit, that is for Bitcoin and not for my pocket.

[Bogart]

Price needs to be less than currently is as theirs other company and other FPGA people now making and shipping for around $300 not 600 euro.

Surely those are for dual-chip ~400MH/s boards.

These Ztex are quad FPGA boards, making 800+MH/s.

[rammy2k2]

- im intrested to buy too, but price is HUGE, i already own 5 boards like these, and average speed is 4.2 Gh/s from all 5.
- if u consider lowering the price im intrested in about 3-4 pieces.
- u send coolers too ?
- do u accept escrow ? / can any trusted member from here to vouch for u ?


PS : it's Group BUY not BYE


LE : after doing a little math, u should really lower your price, because the USB ASIC erruptors have better ROI at 2 BTC than your offer ... and thats bad

[Milan77]

Would like to buy 20 lancelot or 10 these, for about same price.
You decide.
Lancelot is about 300$ this should be around 600$.
Priiority given to one who delivers faster.


I think this is really fair from my side.

PS also help needed for implementing SHA1 salted protocol for SL3 unlocking on these devices

[twitami1]

Or delivers at all...

[seleme]

LE : after doing a little math, u should really lower your price, because the USB ASIC erruptors have better ROI at 2 BTC than your offer ... and thats bad

wow, good find... if those ultra expensive toys have better roi than the price is very, very bad.

[Chefnet]

you don't need to buy. If no one want some I will cancel the deal on Sunday.

[rammy2k2]

you don't need to buy. If no one want some I will cancel the deal on Sunday.

we want, but its very expensive 

[Chefnet]

so like I have said there for me is no cheaper way. only if I get more pcb boards (but the otheres are redesigned and I need for the first a prototype + extra 4-6 weeks)
and with more boards I can get more discount on everything.

250 Quad Boards for example will lower the price to ~ 450€ per board (550$-600$).

[papamoi]

hi chefnet

i ve sent you a pm

if you can help in this

thanks

[Chefnet]

push