Hi,
Just starting out, have purchased an avalon6, have it all connected to RPI3 with controller software, the miner powers on flashes green then just goes to a flashing yellow. and the controller software reports Alive Modules: 0, any help appreciated
Wondering if its the
Rasberry Pi3 thats the issue, im seeing some conflicting reports that the Avalon6 only works with
Rasberry Pi Model BIf I ssh into the pi and do a dmesg I can see that it see's the usb converter.
[ 1619.377039] usb 1-1.5: new full-speed USB device number 5 using dwc_otg
[ 1619.500532] usb 1-1.5: New USB device found, idVendor=29f1, idProduct=33f2
[ 1619.508773] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1619.517485] usb 1-1.5: Product: USB2IIC Converter
[ 1619.523503] usb 1-1.5: Manufacturer: CANAAN
[ 1619.528990] usb 1-1.5: SerialNumber: 20141122
[ 1954.293000] usb 1-1.5: USB disconnect, device number 5
[ 1958.117040] usb 1-1.5: new full-speed USB device number 6 using dwc_otg
[ 1958.240568] usb 1-1.5: New USB device found, idVendor=29f1, idProduct=33f2
[ 1958.248735] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1958.257335] usb 1-1.5: Product: USB2IIC Converter
[ 1958.263287] usb 1-1.5: Manufacturer: CANAAN
[ 1958.268683] usb 1-1.5: SerialNumber: 20141122
Thanks