[ETH ]Stability in a mining Rig

[hatzetheman]

Hi guys

I've recently started mining and I have been trying to overclock my GPU's (2 x MSI GTX 1060 6gb DDR5 [Samsung]).
When mining with Claymore or any other miner I can see that the hashrates of my GPU's are not always the same and they can drop from 22.5 mh/s to about 19 mh/s at times

Is this something normal as I haven't managed to understand exactly what stability refers to. So far the computer hasn't crashed and i have run the Gpu's for at least a week on those settings

MSI afterburner:

Power: 70
Temp: 70
Core Clock: +110
Mem Clock: +800

Thanks

[pr0ximus]

Try these :

Power : as you wish but not below 65
Temp: link it to power. So mine was 67-69
CC: You don't need much of the core for ETH (at least that's what I understood). So keep it -200
MC: +900 (i clocked it up to 990 and had random crashes but you can experiment your best here).

Mine was Zotac GTX 1060 6GB Amp! Edition and I get around 25 MH/s per GPU with Claymore v9.7 solo mining

[hatzetheman]

With these settings, are you getting stable mh/s? Or are they dropping also bellow 25, until maybe to stock?

[pr0ximus]

It fluctuates around 24-25.xx but quite stable.