Problem

[FreshyOnMars]

I'll try to explain this as best of my knowledge, since I'm a newb at all this

I've transffered BTC from BitKonan to an addres that has been generated by my Armory(164pmguHAurWVADRRTQiWPQXeTchmz7sSE), I can see that the BTC is on that addres, and I can see that exact same addres in my Armory wallet under "Unused Adresses", the problem is my Armory doesn't show up the balance, it's like its not even there, and because of that obviously I can't send/spend my BTC

Any kind of help is appreciated,

Thanks in advance

PS: I've got the private keys to the addres(guess that's obvious)

[Holliday]

Is Bitcoin Core synced to the latest block?

[FreshyOnMars]

Yeah it's synced to the latest.

PS: Another thing that is dazzling my mind is that on the site "Bitcoinwhoswho" my BTC Addres is listed under a wallet named: c15b039d9ad9ab30, while my only wallet on Armory is called Primary wallet??

[HCP]

Yeah it's synced to the latest.

PS: Another thing that is dazzling my mind is that on the site "Bitcoinwhoswho" my BTC Addres is listed under a wallet named: c15b039d9ad9ab30, while my only wallet on Armory is called Primary wallet??

There is no way for that website to produce anything useful under "wallet name" unless you give them that info... You could call your wallet "My super awesome wallet of awesomeness" and that information resides solely on your PC.

In fact, that website is pretty much guessing at most things... I suspect all they are attempting to do is crawl the web looking for bitcoin addresses listed on websites and tying them to businesses and/or usernames from forums etc... I wouldn't take anything that website says as being accurate.

As for your transaction not showing up... does Armory show that it is up to the same block height as Core? Current blockheight is: 477448... Your transaction into that address was in block #474666:

Included In Blocks 474666 ( 2017-07-07 17:46:41 + 0 minutes )

If Armory has not processed up to at least block 474666, then there is no way for it to show/include your transaction in the history...

[FreshyOnMars]

Armory said it's fully synced, but in the bottom right corner there are green letters that say: "Connected 304097 blocks"

If this is the problem and I need to get to 400k something, how to do that on Armory? And why does it say it's fully synced atm?

[HCP]

What do you have under "File -> Settings -> General"...

Is the "Let Armory run Bitcoin Core/bitcoind in the background" box checked?

Are the file paths correct for your install? Did you install Core (or setup the Core data directory) in a "non-standard" location? For instance, my Core install is in C:\Program Files\Bitcoin but I set the Data directory to be E:\Bitcoin (dedicated drive for blockchain data):

[FreshyOnMars]

The box is checked.

My BitcoinCore is installed on Local Disk D,

BitCoin Install Dir: D:\Bitcoin
BitCoin Home Dir: D:\Bitcoin

If I try to change any of those two(Install or Home Dir) and restart Armory, it just says "Armory failed to spawn DB, continuing operations in offline mode" and when I change back to these D:\Bitcoin then restart again it's all good and in online mode. But in that online mode there are 300k+ Blocks in the bottom right corner which I guess is the problem since it has to be 400k+.

I guess then my Armory isn't actually fully synced and that's why I can't see the correct balance? Any ideas how to fix it?

[HCP]

what does your dbLog.txt debug file show? Are there any obvious errors being shown there?

You might want to check the armorylog.txt as well... see if there are any errors when spawning the bitcoind and ArmoryDB processes... and double check that the "satoshi-datadir" is showing the correct path to your block folder.

[FreshyOnMars]

Sorry for being a newb here, I've no idea what is dbLog.txt or any of those things u just said, could u explain it to me any better?

[HCP]

In the Armory directory, you should find the debug logs... dbLog.txt and armorylog.txt... they're just text files, open them in a text editor of your choice and scroll all the way to the end of the file... see if there are any obvious errors being output...

Alternatively, copy/paste the content of the log files to pastebin.com and post the links here so people can check for errors.

[FreshyOnMars]

-INFO  - 1500240387: (..\DatabaseBuilder.cpp:477) Found next block after skipping 23127bytes
-INFO  - 1500240387: (..\DatabaseBuilder.cpp:268) parsed block file #10
-INFO  - 1500240388: (..\DatabaseBuilder.cpp:268) parsed block file #13
-INFO  - 1500240388: (..\DatabaseBuilder.cpp:268) parsed block file #17
-INFO  - 1500240391: (..\BitcoinP2P.cpp:947) Connected to Bitcoin node
-DEBUG - 1500240393: (..\Blockchain.cpp:242) Organizing chain
-INFO  - 1500240446: (..\DatabaseBuilder.cpp:56) updated HEADERS db in 71.127s
-INFO  - 1500240446: (..\BlockUtils.cpp:1206) Enabling zero-conf tracking
-INFO  - 1500240493: (..\BDM_supportClasses.cpp:366) Starting address registration process
-INFO  - 1500240495: (..\BlockchainScanner.cpp:650) scanned from height #0 to #142445
-INFO  - 1500240496: (..\BlockchainScanner.cpp:650) scanned from height #142446 to #163635
-INFO  - 1500240496: (..\BlockchainScanner.cpp:-ERROR - 1500240496-ERROR - 1500240496-ERROR - 1500240496: (..\BlockchainScanner.cpp:271) raw data does not match expected block hash
: 650: (..\BlockchainScanner.cpp:271) raw data does not match expected block hash
() scanned from height #163636-ERROR - 1500240496: (..\BlockchainScanner.cpp:271..\BlockchainScanner.cpp:271) raw data does not match expected block hash
)  to #179675
raw data does not match expected block hash



I guess this "ERROR" things are the problem, can u get any info out of this?

I found this thing under: armorylog_20170716_2328

[TransAtlantic]

Armory said it's fully synced, but in the bottom right corner there are green letters that say: "Connected 304097 blocks"

If this is the problem and I need to get to 400k something, how to do that on Armory? And why does it say it's fully synced atm?

Indeed, if you are at block 304097 (while the latest is currently 477579), then you are not sync'ed up, and Armory can't see that transaction and your balance.

I do not know how to fix your issue, though, just pointing you towards what needs to be fixed.

[goatpig]

Post your logs, in full.

[FreshyOnMars]

https://pastebin.com/hQ5t5YL1

https://pastebin.com/575uXUCc

https://pastebin.com/WUQJQzAx

Does any of these help?

I tried Rescan&Rebuild on Armory, restarted it and now it won't even go online mode, the scanning procces always gets stuck near the end

[HCP]

This looks bad:

2017-07-07 19:54 (ERROR) -- BDM.pyc:275 - setSatoshiDir: directory does not exist: C:\Users\user\AppData\Roaming\Bitcoin\
2017-07-07 19:54 (ERROR) -- ArmoryQt.py:1808 - Failed to start Armory database: Invalid blockdata path

Basically, it can't find your Bitcoin Core blocks... although, that error is from the 7th July...

Did you pick and choose a couple of errors that you thought might be relevant? You really should post the WHOLE file... if you're selectively picking entries from the .log file it makes it difficult for folks to see what is really going on.

Seems like the earlier errors you posted would indicate that your Bitcoin Core blocks might be corrupt... but yeah... post FULL logs

[goatpig]

https://pastebin.com/hQ5t5YL1

https://pastebin.com/575uXUCc

https://pastebin.com/WUQJQzAx

Does any of these help?

I tried Rescan&Rebuild on Armory, restarted it and now it won't even go online mode, the scanning procces always gets stuck near the end

Post your logs, in full.

[FreshyOnMars]

https://pastebin.com/xU9pT6t0
https://pastebin.com/V3PcJx9S
https://pastebin.com/RR5rsWHu
https://pastebin.com/ibEw8nU2
https://pastebin.com/3h2FT463

Some of them aren't full because pastebin can't post more then 512 kb
And tbh I've no idea which exactly did I post here now, I literally went through Bitcoin map and Armory map and copy/paste most of the reading files

If you could say exactly the name of which file should I "pastebin" that would be helpful

[goatpig]

Got what I need.

Start BitcoinQt on its own, make sure it's running against your custom datadir and that it's fully synced.

Upgrade Armory to the latest testing builds, delete your DB folder (C:\Users\user\AppData\Roaming\Armory\databases) and boostrap the DB.

You can learn how to path for Armory here:

https://btcarmory.com/docs/pathing

Double check your setup against this for the good measure.

[FreshyOnMars]

I'm real glad that we're getting some proggres here, but there are so many things that I don't know what they mean in that your last post such as:

1)How to make sure that my BTCQT is running against my custom datadir(what is datadir?)

2)Isn't the latest Armory 0.96?

3)What does boostrap the DB mean?

The only 2 things I know how to do out of that post is to start BitCoinQT on it's own and I've deleted the (C:\Users\user\AppData\Roaming\Armory\DATABASES)

I know this has to be pain in the ass, but I really have no clue about this stuff

[goatpig]

1)How to make sure that my BTCQT is running against my custom datadir(what is datadir?)

Start bitcoin-qt with this argument:

Code:

-datadir="D:\Bitcoin"

Either run it from the command prompt or create a shortcut for it and add the argument to the shortcut's target.

2)Isn't the latest Armory 0.96?

There's been 4 testing builds out for 0.96.1 so far. Check the release page:

https://github.com/goatpig/BitcoinArmory/releases

3)What does boostrap the DB mean?

Initializing from scratch, i.e. no existing state/empty folder.