treasure9
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 08, 2017, 04:26:02 PM |
|
Currently power:75% gpu:+110 mem:+350 Only getting 420 sols maybe it's the drivers?? I've cranked mem up to 600 and gpu +140 and notice no increase in sols and crash after a few hours... Try to give it more power(80-85) and it should be more stable and give more sols
|
|
|
|
crazydane
|
|
September 08, 2017, 04:27:35 PM |
|
My 1070 FE can only do 422 sol/s with PL 75, Core + 125, Mem +700. Temp is steady at 66.
My EVGA Superclock does 446 sol/s with PL 75, Core + 150, Mem +700. Temp is steady at 56.
Both are running EWBF 0.3.4 miner Latest drivers.
|
|
|
|
Greeny
Newbie
Offline
Activity: 16
Merit: 0
|
|
September 08, 2017, 05:19:09 PM |
|
ZEC: EWBF 0.3.4b ASUS STRIX 1070 O8G (Micron): Core+100 [1733MHz], Mem+0 [2002MHz], 70% PL, 61°C, ~415 Sol, ~3.5 Sol/W Gigabyte 1070 Windforce OC (Hynix): Core:+175[1732MHz], Mem+0 [2002MHz], 67% PL, 62°C, ~425 Sol, ~3.6 Sol/W
ETH Claymores Dualminer 0.97 ASUS: Core-200, Mem+600, 61% PL, low 50°C, 31,xx MH/s (More + on mem and i get invalid shares) Gigabyte: Core-200, Mem+650, 61% PL, high 50°C, 31,xx MH/s (More + on mem possible, but i dont want to)
Can anyone of you try to drop only their Memory to +0 for ZEC and see if it changes anything? I dont get a single Sol more if I overclock it from +0 - +700Mhz
|
|
|
|
abudfv2008
|
|
September 08, 2017, 05:41:26 PM |
|
Can anyone of you try to drop only their Memory to +0 for ZEC and see if it changes anything? I dont get a single Sol more if I overclock it from +0 - +700Mhz
It is strange. EWBF gains with memory OC a little bit.
|
|
|
|
Supercoiner111
|
|
September 08, 2017, 06:14:21 PM |
|
Across 6 x 1070's getting 55-56 mhs with cccminer 2.2.1 on tribus algo mining Denarius coin on 130w per card...
|
|
|
|
DarrenJC
|
|
September 11, 2017, 11:48:57 AM |
|
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
|
Single GPU Miner - Zotac GTX1070 8GB Mini Still early days, aiming bigger in time
|
|
|
Trofo
Legendary
Offline
Activity: 2618
Merit: 2671
Join the world-leading crypto sportsbook NOW!
|
|
September 11, 2017, 12:15:03 PM |
|
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Try to get one with Samsung memory. That being said I don't know any producer that uses just Samsung memory so good luck.
|
|
|
|
plbartie
Member
Offline
Activity: 76
Merit: 10
ALTCOM wallet: AYGDb1Zwf3vfs2xC4D1G63wwy9RLU5Kb5r
|
|
September 11, 2017, 12:54:08 PM |
|
EVGA 1070 8gb Micron Mem AB: Power 75 Temp 80 Core +100 Mem +700 Dual Mine ETH + SIA ETH - Total Speed: 31.452 Mh/s SC - Total Speed: 314.522 Mh/s https://imgur.com/46Im1Do
|
|
|
|
jyakulis
Sr. Member
Offline
Activity: 469
Merit: 250
J
|
|
September 11, 2017, 01:04:25 PM |
|
My Palit Superjetstream gets 475-495 sol/s with EWBF 0.3.4 miner. My overclock is core+114 and memory+480. After installing the new drivers my hashrates dropped and the card was less stable - I used to be getting consistent 495-505 sol/s and can overclock to core+144 and memory+536. My power consumption now is around 180w.
My zotac minis are at 470-475 sol/s with memory +675, core +100, PL 80, EWBF 0.3.4, drivers 375.XX, Win 7 64 bit. Each card consumes 150w max. Rig is 1 week stable and has a code to restart EWBF every 2 hours. Currently power:75% gpu:+110 mem:+350 Only getting 420 sols maybe it's the drivers?? I've cranked mem up to 600 and gpu +140 and notice no increase in sols and crash after a few hours... It's your power and core.
|
|
|
|
bigjee
|
|
September 11, 2017, 02:08:02 PM |
|
My Palit Superjetstream gets 475-495 sol/s with EWBF 0.3.4 miner. My overclock is core+114 and memory+480. After installing the new drivers my hashrates dropped and the card was less stable - I used to be getting consistent 495-505 sol/s and can overclock to core+144 and memory+536. My power consumption now is around 180w.
My zotac minis are at 470-475 sol/s with memory +675, core +100, PL 80, EWBF 0.3.4, drivers 375.XX, Win 7 64 bit. Each card consumes 150w max. Rig is 1 week stable and has a code to restart EWBF every 2 hours. Currently power:75% gpu:+110 mem:+350 Only getting 420 sols maybe it's the drivers?? I've cranked mem up to 600 and gpu +140 and notice no increase in sols and crash after a few hours... When you push a card beyond its overclocking limits its starts reducing its speed. Try something in between and do only one parameter at a time (so move core clock to 0 and adjust memory till you dont get any increase and back it off by 25. Next try tweaking the core clock then once you have that dialed in play with the PL). Cooler ambient temps help cards gain some performance too (atleast in my setup).
|
|
|
|
blacktux88
|
|
September 11, 2017, 02:50:52 PM |
|
NomNom MusicCoin
6x 1070 undervoltage - 176.67 MH
thakns Tux
|
|
|
|
|
MikeBuzz
Member
Offline
Activity: 68
Merit: 10
|
|
September 11, 2017, 03:05:24 PM |
|
I have that card, mine has Micron memory
|
|
|
|
DarrenJC
|
|
September 11, 2017, 03:07:12 PM |
|
I have that card, mine has Micron memory Not fussed on my memory at this stage, Im in the very early stages of my mining career. This card will go into my gaming system, will be left on overnight to mine. In time, i plan on making a dedicated mining rig.
|
Single GPU Miner - Zotac GTX1070 8GB Mini Still early days, aiming bigger in time
|
|
|
MikeBuzz
Member
Offline
Activity: 68
Merit: 10
|
|
September 11, 2017, 03:09:49 PM |
|
I have that card, mine has Micron memory Not fussed on my memory at this stage, Im in the very early stages of my mining career. This card will go into my gaming system, will be left on overnight to mine. In time, i plan on making a dedicated mining rig. I have tweaked a version of MegaMiner, at the moment each algo is using the fastest miner i can find https://github.com/MikeBuzz/Megaminer
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
September 11, 2017, 03:23:29 PM |
|
Highly dependent on each card, i have 8x 1070 Asus Dual OC(+ Some AMD`s), ordered at the same time from the same batch with Micron memory, also environment temperature makes some differences. At the current time in a large room with +30C environmental temp the cards preforms from 440 to 470 Sol/s for Zcash(When room is at +20C, the same cards preform around 445-480 Sol/s), GPU temperatures varies from 51C upto 68C, those that perform around 440 Sol/s are also the same ones that have a higher temperature. Dual Eth+Sia results in around 30.5-32Mh/s and around 350 for Sia. Seperate optimization for each card, but lets say around 95% Power, +150 Core and +650 Mem on Zcash, and Around 82% Power, +0 Core and +650 Mem on Eth+Sia.
|
|
|
|
BadAstroZA
|
|
September 12, 2017, 11:12:19 PM Last edit: September 12, 2017, 11:25:52 PM by BadAstroZA |
|
I have two rigs... one is 7x ASUS DUAL OC GTX 1070s.
I get about 460 sol/sec on EWBF 0.34 on Equihash, and 30.5MH/sec on Claymore dualmining Equihash and Sia (total of 214MH/sec for the rig), at around 145W per card.
The other rig is 5x Gigabyte Windforce GTX 1070 and 1x MSI Duke GTX 1070. For Equihash, the Gigabytes get around 470-480, and the MSI can reach 500 - but these cards are much heavier on the power draw, even with power turned down. On Claymore dual-mining ETH and Sia I get around 31.5MH/sec (total of around 188MH/sec for the rig).
Great performance but I would suggest the DUALs if electricity cost is a big factor for you.
What I am curious about is Lyra2z settings. My Gigabyte and MSI rig together gets about 9000kH/sec (averageing 1500kH/s per card) when mining ZCoin. I'm not at all sure what the best overclock settings for this algo are, so any input would be appreciated.
|
|
|
|
MikeBuzz
Member
Offline
Activity: 68
Merit: 10
|
|
September 13, 2017, 03:47:56 PM |
|
I have two rigs... one is 7x ASUS DUAL OC GTX 1070s.
I get about 460 sol/sec on EWBF 0.34 on Equihash, and 30.5MH/sec on Claymore dualmining Equihash and Sia (total of 214MH/sec for the rig), at around 145W per card.
The other rig is 5x Gigabyte Windforce GTX 1070 and 1x MSI Duke GTX 1070. For Equihash, the Gigabytes get around 470-480, and the MSI can reach 500 - but these cards are much heavier on the power draw, even with power turned down. On Claymore dual-mining ETH and Sia I get around 31.5MH/sec (total of around 188MH/sec for the rig).
Great performance but I would suggest the DUALs if electricity cost is a big factor for you.
What I am curious about is Lyra2z settings. My Gigabyte and MSI rig together gets about 9000kH/sec (averageing 1500kH/s per card) when mining ZCoin. I'm not at all sure what the best overclock settings for this algo are, so any input would be appreciated.
Try this build of ccminer for lyra2z https://github.com/Nanashi-Meiyo-Meijin/ccminer/releases/
|
|
|
|
MarkR8673
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 13, 2017, 06:38:55 PM |
|
2-EVGA 1070 Hybrids, PL 65%, +75 CC, +740 MC, 0.00v boost 4-EVGA 1070 Gaming Black, PL 76%, +75 CC, +740 MC, 0.00v boost
Dual Mining ETH/DCR to get a total of 186MH/s ETH, 2.3GH/s DCR, 900W for my rig.
Been running a few months and only restarts every few days.
|
|
|
|
DarrenJC
|
|
September 13, 2017, 06:39:53 PM |
|
Got my card in, up and running.
Power 80% Core +100 Memory +400 Fan Spd 75% Steady at 58 degrees C
daggerhash 26.5 MH/s decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
|
Single GPU Miner - Zotac GTX1070 8GB Mini Still early days, aiming bigger in time
|
|
|
|