pfft
|
|
November 09, 2017, 01:05:29 PM |
|
My rig with 6x GTX1070 is mining ZEC with a total hashrate of about 2900 Sols/s. what`s your oc settings ?
|
|
|
|
PontusLSE
Newbie
Offline
Activity: 50
Merit: 0
|
|
November 09, 2017, 01:28:39 PM |
|
what`s your oc settings ? Core +190 Memory +1200 (I´m running linux, so this value should be +600 in Windows) Powerlimit 150W
|
|
|
|
cryptofriendz
Member
Offline
Activity: 111
Merit: 10
Do or do not.
|
|
November 09, 2017, 03:03:56 PM |
|
My rig with 6x GTX1070 is mining ZEC with a total hashrate of about 2900 Sols/s. what`s your oc settings ? Core +190 Memory +1200 (I´m running linux, so this value should be +600 in Windows) Powerlimit 150W I was like WTF for a second. Why is that difference between win and lin?
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
November 09, 2017, 04:49:31 PM |
|
My rig with 6x GTX1070 is mining ZEC with a total hashrate of about 2900 Sols/s. what`s your oc settings ? Core +190 Memory +1200 (I´m running linux, so this value should be +600 in Windows) Powerlimit 150W I was like WTF for a second. Why is that difference between win and lin? Cause in linux your setting for memory is about GPUMemoryTransferRateOffset So for basic, transfer rate of your memory = Memory Freq x 2 So OC on Windows will be Core +190 / Memory +600 What is your model by the way +190 on Core seems impressive ...
|
|
|
|
josh75
Newbie
Offline
Activity: 74
Merit: 0
|
|
November 14, 2017, 03:38:37 AM |
|
Hello all
i have some GTX 1070 G1 Gigabyte
does somebody have a good OC for Zcash Mining ?
i am on linux and simple mining
Best regards
|
|
|
|
dreamer8
Newbie
Offline
Activity: 68
Merit: 0
|
|
November 14, 2017, 04:09:23 AM |
|
My 960 reach max 1150KHs. Is it normal?
|
|
|
|
nekicowek
Newbie
Offline
Activity: 9
Merit: 0
|
|
November 24, 2017, 06:29:28 PM |
|
Hello all
i have some GTX 1070 G1 Gigabyte
does somebody have a good OC for Zcash Mining ?
i am on linux and simple mining
Best regards
You can try this settings for 1070 g1 pl: 75 core +125 mem +600 https://imgur.com/vGPLt3Lgl hf
|
|
|
|
Helios45
|
|
December 03, 2017, 04:37:57 AM |
|
So I finally built my first mining rig and I'm currently testing with one single 1070 Zotac Mini
I have spent several hours trying all sorts of OC combinations and it looks like boosting the memory doesn't do anything to my hashrate however I'm gaining hashrate from boosting the GPU core
I'm using the latest version of EWBF and I'm getting about 425 sols/s at 100% TDP (150w) however I'm planning to use the following settings as it is the best optimization for efficiency:
Hash: 360 Sol/s TDP: 60% (90 Watts) No Memory OC Core OC: 1914mhz (+205) Temperature: 65 degrees Fan speed: 25% (Auto) Efficiency: 4 sol/w
Is it normal that memory OC doesn't do anything to the speed ?
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
December 04, 2017, 04:02:30 PM |
|
So I finally built my first mining rig and I'm currently testing with one single 1070 Zotac Mini
I have spent several hours trying all sorts of OC combinations and it looks like boosting the memory doesn't do anything to my hashrate however I'm gaining hashrate from boosting the GPU core
I'm using the latest version of EWBF and I'm getting about 425 sols/s at 100% TDP (150w) however I'm planning to use the following settings as it is the best optimization for efficiency:
Hash: 360 Sol/s TDP: 60% (90 Watts) No Memory OC Core OC: 1914mhz (+205) Temperature: 65 degrees Fan speed: 25% (Auto) Efficiency: 4 sol/w
Is it normal that memory OC doesn't do anything to the speed ?
All depend on algo you are mining Some is related to GPU dependence other use MEMORY.
|
|
|
|
tadeus1
Member
Offline
Activity: 140
Merit: 11
|
|
December 04, 2017, 08:19:43 PM |
|
Helios45: I would not goto 60% TDP on the 1070. Hashrate drops a lot at that Power %. Try with 65 or 70%. Keep around 100-110 watts. Also try to get the temperature around 55C. May need to set fan to 35%
|
|
|
|
bigjee
|
|
December 04, 2017, 09:10:03 PM |
|
So I finally built my first mining rig and I'm currently testing with one single 1070 Zotac Mini
I have spent several hours trying all sorts of OC combinations and it looks like boosting the memory doesn't do anything to my hashrate however I'm gaining hashrate from boosting the GPU core
I'm using the latest version of EWBF and I'm getting about 425 sols/s at 100% TDP (150w) however I'm planning to use the following settings as it is the best optimization for efficiency:
Hash: 360 Sol/s TDP: 60% (90 Watts) No Memory OC Core OC: 1914mhz (+205) Temperature: 65 degrees Fan speed: 25% (Auto) Efficiency: 4 sol/w
Is it normal that memory OC doesn't do anything to the speed ?
Try these: TDP: 100% (For max efficiency try lowering to 65-75 TDP) Memory OC: +600 Core OC: +100 Temperature: 65 degrees Fan speed: 25% (Auto) Define fan curve in AB. Keep card to under 70C with fan speed at 70-80%. Auto is useless Aim for at least 450 sol/s
|
|
|
|
xapsec
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 04, 2017, 09:56:13 PM |
|
I have a mix of 1070. One Gigabyte G1 32Mh/s and 470+ sol/s (great card, but expensive) Three Zotac Mini (mining edition-with a single fan) 31.5 Mh/s and 450 sol/s (best buy I think) Two Inno3d Twin 30 mh/s and 430-440 sol/s (worst card ever, hot, unstable) I'll keep the memory clock on the zotac mini on 650, on the G1 725 and on Inno3d 480-460.The power limit 62 on G1 and 72 on the rest(mining Eth).
I mine ETH now and I don't remember the core clock when mining Zcash..100..200 maybe on the G1. Hope it helps
|
|
|
|
Matalon
Newbie
Offline
Activity: 20
Merit: 0
|
|
December 04, 2017, 11:07:16 PM |
|
-75 on core +595 on memory
|
|
|
|
SCAR_8
Member
Offline
Activity: 139
Merit: 10
|
|
December 05, 2017, 12:25:46 AM |
|
I get 35 mh/s mining vertcoin with my 1070. Anyone tried mining bitcoin gold with just one 1070? Thought about trying it soon. Since vert halves in a few days.
|
|
|
|
Helios45
|
|
December 05, 2017, 01:11:03 AM |
|
I have a mix of 1070. One Gigabyte G1 32Mh/s and 470+ sol/s (great card, but expensive) Three Zotac Mini (mining edition-with a single fan) 31.5 Mh/s and 450 sol/s (best buy I think) Two Inno3d Twin 30 mh/s and 430-440 sol/s (worst card ever, hot, unstable) I'll keep the memory clock on the zotac mini on 650, on the G1 725 and on Inno3d 480-460.The power limit 62 on G1 and 72 on the rest(mining Eth).
I mine ETH now and I don't remember the core clock when mining Zcash..100..200 maybe on the G1. Hope it helps
Can you share your settings on the Zotac Mini ?
|
|
|
|
xapsec
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 06, 2017, 09:25:24 AM |
|
For Eth Power limit 72 Core Clock -200 Memory clock +650 Fan speed 70 The whole rig consume 780 Watts For Zcash, if I remember right, just raise the Core clock to 200 and power limit to 100.Play with those two settings a little.You should get 450-460 Sol/s easily.On the wall ..1000 Watts I have only one Nvidia rig, so I am not an expert.
|
|
|
|
PontusLSE
Newbie
Offline
Activity: 50
Merit: 0
|
|
December 06, 2017, 09:41:34 AM |
|
what`s your oc settings ? Core +190 Memory +1200 (I´m running linux, so this value should be +600 in Windows) Powerlimit 150W I was like WTF for a second. Why is that difference between win and lin? Cause in linux your setting for memory is about GPUMemoryTransferRateOffset So for basic, transfer rate of your memory = Memory Freq x 2 So OC on Windows will be Core +190 / Memory +600 What is your model by the way +190 on Core seems impressive ... Sorry for a late reply. The model is Gigabyte GeForce GTX1070 WindForce OC 8GB (GV-N1070WF2OC-8GB). Stable as a rock, 14 days uptime as we speak.
|
|
|
|
xapsec
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 06, 2017, 06:31:00 PM Last edit: December 07, 2017, 09:25:59 AM by xapsec |
|
I won't open another topic.Maybe you guys can give me an advice.I helped a friend to build two Gigabyte 1070 G1 rigs. Unfortunately, one card stays behind.26 MH/s.The other eleven card works fine at 31.8 Mh/s. The riser seems to be ok.We changed it to another one and no effect. Power limit 70 ( we try 100..no effect) Power core 0 Memory core 700 Does anyone encounter this kind of problem?
|
|
|
|
Helios45
|
|
December 06, 2017, 09:23:10 PM |
|
I won't open another topic.Maybe you guys can me an advice.I helped a friend to build two Gigabyte 1070 G1 rigs. Unfortunately, one card stays behind.26 MH/s.The other eleven card works fine at 31.8 Mh/s. The riser seems to be ok.We changed it to another one and no effect. Power limit 70 ( we try 100..no effect) Power core 0 Memory core 700 Does anyone encounter this kind of problem?
Are you connecting the display monitor to one of the 1070 cards ?
|
|
|
|
xapsec
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 07, 2017, 09:25:12 AM |
|
No..directly on the motherboard.At this moment, no monitor is connected to the rig.i use real vnc.
|
|
|
|
|