Spoondoolies SP30 Firmware troubles

[Malecki]

 Hello,
 I bought 7 Spoondoolies SP30's off ebay and they still had the passwords set so the person I bought them from gave me a link to the firmare with instructions to flash the machines with it. .put firmware on SD card with Win32DiskImager. 2. Put SD in miner, hook up network cable, then plug in miner. With in 2-5min lights by network cable will flash amber and green.3. Wait about 15 min for it to put in firmware then unplug miner 4. wait 1 min then remove SD card then power up machine.....OK I did all this and it went as described but once I finished and repowered it now will power up, but that's it won't even show on my DHCP list. I tried to do it again, but now the green and amber lights won't flash. Any ideals? Thanks

[tntdgcr]

Hello,
 I bought 7 Spoondoolies SP30's off ebay and they still had the passwords set so the person I bought them from gave me a link to the firmare with instructions to flash the machines with it. .put firmware on SD card with Win32DiskImager. 2. Put SD in miner, hook up network cable, then plug in miner. With in 2-5min lights by network cable will flash amber and green.3. Wait about 15 min for it to put in firmware then unplug miner 4. wait 1 min then remove SD card then power up machine.....OK I did all this and it went as described but once I finished and repowered it now will power up, but that's it won't even show on my DHCP list. I tried to do it again, but now the green and amber lights won't flash. Any ideals? Thanks

give it 30 min , might be a weird flash to a failing mmc. might be time to run an SD boot image.

[fanatic26]

the SP30 was known for its memory chip failing, you might have to run it full time off the SD card.

[Malecki]

I tried letting it run the SD on one of the miners for an hr, but still got the same results on 6 of the 7 miners. they won't even read the SD afterwards

[Maxumark]

Assuming you already tried user id: admin password: admin
 
That was the factory default