Antminer L3+ OVERCLOCKED !!! HOT !!! full review with LOTs of pics

[Chiko.Chavez]

Good Morning,

actually my new L3+ (with N-Boards) are running with 425 MHz (that´s around 555 MHs).
They are doing well and HW-Error rate is very low.

I heard from other Miners that they can handle 450 MHz also.
But in my humble Opinion it´s a Lottery with the new Boards.

Anyone here with December and January Batch ?

It would be interesting to know when Bitmain changed the Boards.

I have had mine at 412Mhz for 3 hours and am getting around 540Mhs, so far I have 4 HW errors on one of the boards and 0 on the others. Temps are 44 PCB and 51 Chip, Fan 1  3,630 Fan 2  3,540 . What is an acceptable amount of HW errors to be getting?

[1715059395]

1715059395

[1715059395]

1715059395

[Sackl]

HW Errors are specific to each Hashboard.

If they rise significantly with OC that´s a bad sign.

[Master3004]

https://imgur.com/Iaz9Qrx


my l3+ run solid everyday with 1-2hw/min at 640+ and about 3 rejects in 16hrs // stable around 60°c on 85% maunal fan 1088w apw7 on 120



one of my L3+ has a lazy board that wants to work when it feels like it... loose contact somewhere... i quit messing with it... EVEN THAT one hashes around 490,mh/s ON 3 boards...

https://imgur.com/dbzC7wg

https://imgur.com/qCLciw5

[sxemini]

my l3+ run solid everyday with 1-2hw/min at 640+ and about 3 rejects in 16hrs // stable around 60°c on 85% maunal fan 1088w apw7 on 120



one of my L3+ has a lazy board that wants to work when it feels like it... loose contact somewhere... i quit messing with it... EVEN THAT one hashes around 490,mh/s ON 3 boards...

To much OC. My L3+ runs with 580mh @ 820w and the other one with 620mh @ 920w and fan lowered to 40%