Hi all,
I have a A2 Terminator and the PSU recently blew on it. The A2 that I have, doesn't appear to be the mainstream version in the silver case so I suspect it is a clone. I have others too (also clones) but they are completely different.
The raspberry PI is connected to a control board. When I went to replace the PSU, I accidentally unplugged the cable titled PCIE which was actually plugged into the motherboard power connector on the PSU (without a connector) and not the PCIE power connector as labelled.
Unfortunately, I hadn't documented which pins they were connected to before accidentally unplugging them and wonder if anyone here can help me work out how to plug this back in correctly.
I've taken a picture of the control board and how it was connected by using random pins for demonstration purposes only:
https://ibb.co/fEZVXFAs you can see, the pins used to turn on the PSU on already had a cable attached (it remained connected) so the green cable does not go there if following the standard motherboard power colour code.
I've worked out the following pins but have no idea what the brown or green cable connect to:
https://ibb.co/cJZKRaCan anyone help me? I would be most grateful!!!
