ellonimo (OP)
Newbie
Offline
Activity: 1
Merit: 0
|
|
August 20, 2017, 01:53:55 PM |
|
Hello. As you know, MSI Afterburner allows us to save up to 5 presets. Last 2 days I was seraching how to swith presets automaticaly, because it is not convenient to me to set unsyncronised presets with undervolting curves on all rigs one by one for eath card. Here is a way to activate one of your presets automaticaly, for example, before miner launch in batch file: "<Full system path to Afterburner.exe>" -Profile<Profile number 1-5>
My example for the standard AB installation path: "C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile1
MSI Afterburner has to be started at the execution time (as for me it starts at the system start), otherwise cmd window will not go batch next commands and you will have to change the command above launch with start cmd.exe /C
With this approach you can set an AB preset for ZEC when you launch ZEC bat file to start mining, a preset for ETH when you launch ETH mining etc. One more benefit of usage such command line, that all unsyncronised presets with specified number activates in one time, unlike manual setting in UI. You can thank me if you want: 0xc0C82AAa27c08426387e76Db6E92B1fc96D9fEc9 (ETH) LZ5J5RDrtTN58bhqnMSVhWYcb4NsLXMCuc (LTC) t1RxfL9YBvBZQ11BQRQwuid8z4LfzDUEr3g (ZEC)
Have a good day!
|
|
|
|
|
|
|
|
The network tries to produce one block per 10 minutes. It does this by automatically adjusting how difficult it is to produce blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
bitovicbit
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 18, 2018, 12:58:33 AM Last edit: February 18, 2018, 01:15:33 AM by bitovicbit |
|
Frack me it works!Why does this not have more views?? No MSI EVER worked for me on startup and now it does,thank you so very much
|
|
|
|
car1999
|
|
February 18, 2018, 03:06:29 AM |
|
looks awesome, thanks.
|
|
|
|
Mr.Spider703
Member
Offline
Activity: 392
Merit: 27
http://radio.r41.ru
|
|
February 18, 2018, 03:53:30 AM |
|
rather than easier through the Nvidia Inspector to each map to specify overclocking, click create shortcut in the management of the PC to create a task at the event of turning on the PC, at the system event the display 4101 run the program and specify the path to the created shortcut, on the inspector's shortcut, click the properties and copy the line with the specified overclock, insert it into the command line parameters for the reboot https://drive.google.com/open?id=1kybjARQwhTlOhPmWUVT8Inoy_6NZfYRw
|
|
|
|
e97
Jr. Member
Offline
Activity: 58
Merit: 1
|
|
May 28, 2018, 04:32:34 AM |
|
Hello. As you know, MSI Afterburner allows us to save up to 5 presets. Last 2 days I was seraching how to swith presets automaticaly, because it is not convenient to me to set unsyncronised presets with undervolting curves on all rigs one by one for eath card. Here is a way to activate one of your presets automaticaly, for example, before miner launch in batch file: "<Full system path to Afterburner.exe>" -Profile<Profile number 1-5>
My example for the standard AB installation path: "C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile1
MSI Afterburner has to be started at the execution time (as for me it starts at the system start), otherwise cmd window will not go batch next commands and you will have to change the command above launch with start cmd.exe /C
With this approach you can set an AB preset for ZEC when you launch ZEC bat file to start mining, a preset for ETH when you launch ETH mining etc. One more benefit of usage such command line, that all unsyncronised presets with specified number activates in one time, unlike manual setting in UI. You can thank me if you want: 0xc0C82AAa27c08426387e76Db6E92B1fc96D9fEc9 (ETH) LZ5J5RDrtTN58bhqnMSVhWYcb4NsLXMCuc (LTC) t1RxfL9YBvBZQ11BQRQwuid8z4LfzDUEr3g (ZEC)
Have a good day!
Damn this is even better since I don't have to switch to nvidia-inspector! Awesome, thank you!
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3136
Merit: 1003
|
|
March 09, 2021, 12:06:42 PM |
|
Hello. As you know, MSI Afterburner allows us to save up to 5 presets. Last 2 days I was seraching how to swith presets automaticaly, because it is not convenient to me to set unsyncronised presets with undervolting curves on all rigs one by one for eath card. Here is a way to activate one of your presets automaticaly, for example, before miner launch in batch file: "<Full system path to Afterburner.exe>" -Profile<Profile number 1-5>
My example for the standard AB installation path: "C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile1
MSI Afterburner has to be started at the execution time (as for me it starts at the system start), otherwise cmd window will not go batch next commands and you will have to change the command above launch with start cmd.exe /C
With this approach you can set an AB preset for ZEC when you launch ZEC bat file to start mining, a preset for ETH when you launch ETH mining etc. One more benefit of usage such command line, that all unsyncronised presets with specified number activates in one time, unlike manual setting in UI. You can thank me if you want: 0xc0C82AAa27c08426387e76Db6E92B1fc96D9fEc9 (ETH) LZ5J5RDrtTN58bhqnMSVhWYcb4NsLXMCuc (LTC) t1RxfL9YBvBZQ11BQRQwuid8z4LfzDUEr3g (ZEC)
Have a good day!
Thx much appreciated.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1638
Merit: 1035
|
|
March 09, 2021, 01:59:37 PM |
|
Hello from the past An interesting idea, but when I used Windows for mining, I connected to each farm remotely, cut the team viewer, launched a new miner and changed the settings in MSIAfterburner. Today, there are many useful operating systems for mining that allow you to automate processes without these games.
|
|
|
|
fmz89
Legendary
Offline
Activity: 1766
Merit: 1002
|
|
March 10, 2021, 01:20:57 PM |
|
well dont expected this, many miner who use msi afterburner will really helpful with your share, gladly i dont use msi afterburner again, odnt might be alternative for time being
many thanks ..... appreciated
|
|
|
|
jimlaman8
Jr. Member
Offline
Activity: 52
Merit: 12
|
|
June 04, 2021, 03:37:49 AM |
|
How do you do this and select the gpu if you have more than one?
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3136
Merit: 1003
|
|
June 08, 2021, 02:44:20 PM |
|
How do you do this and select the gpu if you have more than one?
I change t-rex.exe application wording to date released... so T-REX-0.20.3-win_4-24-21.exe Example profile 5 has 2 cards different clock settings in msi afterburner. So batch file would be. :start @ECHO off "C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile5 C:\CCMINER\T-REX-0.20.3-win_4-24-21\T-REX-0.20.3-win_4-24-21.exe -a ethash -d 0,1 -i 20,20 --cpu-priority 0 --log-path trexd_log.log --temperature-limit 68 --api-bind-telnet 0 --api-bind-http 0 -o stratum+ssl://us-eth.2miners.com:12020 -u yourwalletaddress -p x -w RIG2 goto start
|
|
|
|
|