Woke up to my rig not mining

[siforek]

Yesterday I spent the day figuring out my rig, getting everything configured & overclocked This morning I work up to no internet connectivity & my minerfarm shows it stopped around 3AM. I quickly reset it & all is good now, my question is where can I view the logs & determine what happened? Typically /var/log is where I'd normally go in Redhat distros but this PimpOS/Ubuntu.

Also while I figure it could be that the overclock rates were unstable, it's far mlre likely that it's the wifi card (yeah I know, ethernet is far better). It's just that I don't have cat5 in the room I need it in. I already have a PowerLine in use for my solar panel & turning my old router into a wireless bridge using DD-WRT is great if I don't mind resetting it a couple times a day.

Any help is greatly appreciated

[1714025625]

1714025625

[1714025625]

1714025625

[Supercoiner111]

You will need to start one at a time and troubleshoot through this try with no OC to eliminate then think about the wifi....

[Cereberus]

Yesterday I spent the day figuring out my rig, getting everything configured & overclocked This morning I work up to no internet connectivity & my minerfarm shows it stopped around 3AM. I quickly reset it & all is good now, my question is where can I view the logs & determine what happened? Typically /var/log is where I'd normally go in Redhat distros but this PimpOS/Ubuntu.

Also while I figure it could be that the overclock rates were unstable, it's far mlre likely that it's the wifi card (yeah I know, ethernet is far better). It's just that I don't have cat5 in the room I need it in. I already have a PowerLine in use for my solar panel & turning my old router into a wireless bridge using DD-WRT is great if I don't mind resetting it a couple times a day.

Any help is greatly appreciated

It's not far more like it is your wifi card unless you have a Chinese one of very low quality. I would get one of these new things with 2 antenna's and coverage of up to 750 MBS. I had a similar problem like yours, that my mining rig would stop and crash and after carefully doing all the troubleshoot to it, it was one of the cards could not run for more than a few hours with being overclocked. Found it by trying one by one and let that at stock settings. My miner now runs from several days without a problem. You can try this too although I am not very experienced in mining with Linux. I have Linux Ubuntu as my second OS for specific purposes use but I do my mining in Windows which is run 95% of all time from me.

[siforek]

You will need to start one at a time and troubleshoot through this try with no OC to eliminate then think about the wifi....

The thing is if it were really just an unstable overclock would it then disconnect from the network? I can see perhaps if it stopped mining because of instability, then disconnected from the network IF it was on power saving mode(which it's not) so that's why I really just need to look through the logs.

My minelog is as follows. You can see where the IP goes from .95 to .96 when I change to wifi.

Code:

[PID]<minerfarm info> 2017-08-28 02:46:10Z: (FCTRL) database created.
[PID]<minerfarm info> 2017-08-28 02:46:10Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 02:46:10Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 02:46:10Z: (FCTRL) local IP not found, not updating miner.farm.
[PID]<minerfarm info> 2017-08-28 02:46:20Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 02:49:19Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 02:49:19Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 02:50:47Z: (FCTRL) service STOPPED. Interrupted system call 
[PID]<minerfarm info> 2017-08-28 02:51:35Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 02:51:35Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 02:51:58Z: (FCTRL) service STOPPED. Interrupted system call 
[PID]<minerfarm info> 2017-08-28 02:52:33Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 02:52:33Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 02:52:52Z: (FCTRL) service STOPPED. Interrupted system call 
[PID]<minerfarm info> 2017-08-28 02:52:52Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 02:52:52Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 03:12:49Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 03:12:49Z: (FCTRL) local IP is 192.168.42.95.
[PID]<minerfarm info> 2017-08-28 03:13:02Z: Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 03:13:02Z: Using port 4028...
[PID]<minerfarm info> 2017-08-28 03:13:04Z: Miner screen started...
[PID]<minerfarm info> 2017-08-28 03:33:18Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 03:33:18Z: (FCTRL) local IP is 192.168.42.96.
[PID]<minerfarm info> 2017-08-28 03:33:28Z: Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 03:33:28Z: Using port 4028...
[PID]<minerfarm info> 2017-08-28 03:33:30Z: Miner screen started...
[PID]<minerfarm info> 2017-08-28 03:53:22Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 03:53:22Z: (FCTRL) local IP is 192.168.42.96.
[PID]<minerfarm info> 2017-08-28 03:56:19Z: (FCTRL) service STOPPED. Interrupted system call 
[PID]<minerfarm info> 2017-08-28 04:01:42Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 04:01:42Z: (FCTRL) local IP is 192.168.42.96.
[PID]<minerfarm info> 2017-08-28 04:01:52Z: Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 04:01:52Z: Using port 4028...
[PID]<minerfarm info> 2017-08-28 04:01:54Z: Miner screen started...
[PID]<minerfarm info> 2017-08-28 04:50:57Z: (CLI user) Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 04:50:57Z: (CLI user) Using port 4028...
[PID]<minerfarm info> 2017-08-28 04:50:59Z: (CLI user) Miner screen started...
[PID]<minerfarm info> 2017-08-28 07:35:33Z: (CLI user) Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 07:35:33Z: (CLI user) Using port 4028...
[PID]<minerfarm info> 2017-08-28 07:35:35Z: (CLI user) Miner screen started...
[PID]<minerfarm info> 2017-08-28 17:10:25Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 17:10:25Z: (FCTRL) local IP is 192.168.42.96.
[PID]<minerfarm info> 2017-08-28 17:10:33Z: Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 17:10:33Z: Using port 4028...
[PID]<minerfarm info> 2017-08-28 17:10:35Z: Miner screen started...
[PID]<minerfarm info> 2017-08-28 17:11:52Z: (FCTRL) service STOPPED. Interrupted system call 
[PID]<minerfarm info> 2017-08-28 17:12:24Z: (FCTRL) service started.
[PID]<minerfarm info> 2017-08-28 17:12:24Z: (FCTRL) local IP is 192.168.42.96.
[PID]<minerfarm info> 2017-08-28 17:12:27Z: (CLI user) Starting command line miner on localhost
bin: ethdcrminer64 
conf: claymore.dual.pcfg
[PID]<minerfarm info> 2017-08-28 17:12:27Z: (CLI user) Using port 4028...
[PID]<minerfarm info> 2017-08-28 17:12:29Z: (CLI user) Miner screen started...

Is there any other logs I could be reviewing?

[siforek]

Yesterday I spent the day figuring out my rig, getting everything configured & overclocked This morning I work up to no internet connectivity & my minerfarm shows it stopped around 3AM. I quickly reset it & all is good now, my question is where can I view the logs & determine what happened? Typically /var/log is where I'd normally go in Redhat distros but this PimpOS/Ubuntu.

Also while I figure it could be that the overclock rates were unstable, it's far mlre likely that it's the wifi card (yeah I know, ethernet is far better). It's just that I don't have cat5 in the room I need it in. I already have a PowerLine in use for my solar panel & turning my old router into a wireless bridge using DD-WRT is great if I don't mind resetting it a couple times a day.

Any help is greatly appreciated

It's not far more like it is your wifi card unless you have a Chinese one of very low quality. I would get one of these new things with 2 antenna's and coverage of up to 750 MBS. I had a similar problem like yours, that my mining rig would stop and crash and after carefully doing all the troubleshoot to it, it was one of the cards could not run for more than a few hours with being overclocked. Found it by trying one by one and let that at stock settings. My miner now runs from several days without a problem. You can try this too although I am not very experienced in mining with Linux. I have Linux Ubuntu as my second OS for specific purposes use but I do my mining in Windows which is run 95% of all time from me.

This is the card I have: https://www.asus.com/us/Networking/USBAC56/
If it were an unstable OC wouldn't there be a log somewhere showing that? Yesterday I tried copying someone else's OC configs & it was clearly unstable because it stopped after like 3 minutes & gave all sorts of errors in red lol. Now I've got my 1070s to 31.5MH at 100/1275 as someone on this forum suggested. They did say 1 of their cards they had to use 100/1225 so I guess that might be it. I'd much rather it be an OC issue I can easily fix than a wifi issue I can rarely troubleshoot. I have a good connection:

Code:

wlan0     IEEE 802.11AC  ESSID:"Sonic-5220"  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency:5.765 GHz  Access Point: F8:2C:18:1A:E4:9E   
          Bit Rate:867 Mb/s   Sensitivity:0/0  
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:****-****-****-****-****-****-****-****   Security mode:open
          Power Management:off
          Link Quality=89/100  Signal level=70/100  Noise level=0/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

[siforek]

Just wanted to post an update. Since removing the wifi & plugging in directly I've had no issues at all my 1070s are purring away at 31.5MH/s, 47C, 70% fan speed & I'm getting 0-1% stale shares I did see another ASUS wifi card at Fry's yesterday with way bigger antennas for 2x the price claiming "Ultimate Range" or some crap & nearly tried it but for now my rigs go in my dining room, right next to the fireplace where we'd have family dinners if we had a table