Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 23, 2011, 07:34:34 AM Last edit: June 23, 2011, 09:28:13 AM by Chick |
|
Has anybody else experienced this problem? I switched one of the pci-e risers because it was defective, now the mobo is actually detecting it, but causes Ubuntu to hang on the loading screen with 5 red dots.
Giving a .5 bounty to those whom can help me solve it.
|
|
|
|
detroit
Member
Offline
Activity: 69
Merit: 10
|
|
June 23, 2011, 11:11:07 AM |
|
I'm just about as helpless as the next guy in ubuntu, but you'll probably need to boot to a command line shell and re-initialize your X setup. But that's about all the detail I can give you on it! Try some google or search on the ubuntu forums. I think your problem is that X doesn't see the video card it's accustomed to and it's not that good at adapting.
|
Tradehill.com referral code: TH-R1494 Please consider using it if I've said something useful!
|
|
|
grndzero
|
|
June 23, 2011, 10:13:08 PM |
|
Has anybody else experienced this problem? I switched one of the pci-e risers because it was defective, now the mobo is actually detecting it, but causes Ubuntu to hang on the loading screen with 5 red dots.
Giving a .5 bounty to those whom can help me solve it.
Was it an existing card in the slot on the motherboard and you just extended it, or are you adding a new card to a new slot with an extender?
|
Ubuntu Desktop x64 - HD5850 Reference - 400Mh/s w/ cgminer @ 975C/325M/1.175V - 11.6/2.1 SDK Donate if you find this helpful: 1NimouHg2acbXNfMt5waJ7ohKs2TtYHePy
|
|
|
Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 23, 2011, 10:48:47 PM |
|
Has anybody else experienced this problem? I switched one of the pci-e risers because it was defective, now the mobo is actually detecting it, but causes Ubuntu to hang on the loading screen with 5 red dots.
Giving a .5 bounty to those whom can help me solve it.
Was it an existing card in the slot on the motherboard and you just extended it, or are you adding a new card to a new slot with an extender? Existing slot.
|
|
|
|
grndzero
|
|
June 23, 2011, 10:57:06 PM |
|
Has anybody else experienced this problem? I switched one of the pci-e risers because it was defective, now the mobo is actually detecting it, but causes Ubuntu to hang on the loading screen with 5 red dots.
Giving a .5 bounty to those whom can help me solve it.
Was it an existing card in the slot on the motherboard and you just extended it, or are you adding a new card to a new slot with an extender? Existing slot. x16 or x1 extender? Is it the only card in the system? Are all the cards in the system the same card? I'd double check that the system works with the card in the slot, and even though it shouldn't make a difference, try having the primary display card onboard.
|
Ubuntu Desktop x64 - HD5850 Reference - 400Mh/s w/ cgminer @ 975C/325M/1.175V - 11.6/2.1 SDK Donate if you find this helpful: 1NimouHg2acbXNfMt5waJ7ohKs2TtYHePy
|
|
|
drawoc
Full Member
Offline
Activity: 168
Merit: 100
Firstbits: 175wn
|
|
June 24, 2011, 12:09:00 AM |
|
Once you get to the screen with the dots, do Ctrl-alt-F1. Login, and type "lspci" (without the quotes) Is the card included in that list? If so, does the file /etc/X11/xorg.conf exist? You can test by typing: Capitalization matters If it says "No such file or directory" it doesn't exist, if it says "/etc/X11/xorg.conf" it does exist
|
Donate: 175WNXmJ1WVhFgVGKUqEhYtAQGRYAvqPA
|
|
|
Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 24, 2011, 01:35:37 AM |
|
I took the long way and re-installed Ubuntu... Now cards 0 and 2 are being detected, but it says that it can't get any information out of 1 and 3 is just plain-out not detected.
|
|
|
|
Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 24, 2011, 01:44:10 AM |
|
Once you get to the screen with the dots, do Ctrl-alt-F1. Login, and type "lspci" (without the quotes) Is the card included in that list? If so, does the file /etc/X11/xorg.conf exist? You can test by typing: Capitalization matters If it says "No such file or directory" it doesn't exist, if it says "/etc/X11/xorg.conf" it does exist Yeah, I have 4 cards but only 3 show up.
|
|
|
|
drawoc
Full Member
Offline
Activity: 168
Merit: 100
Firstbits: 175wn
|
|
June 24, 2011, 02:48:07 AM |
|
Yeah, I have 4 cards but only 3 show up.
In that case, it sounds like a hardware/bios issue - make sure all the cards are seated properly, bios is configured etc. Sadly, I'm not too much help in that area. lspci should report anything whether the drivers are sane or not. Sometimes the kernel logs (at /var/log/kern.log) can hint at the problem. Running: grep pci /var/log/kern.log will search for pci related messages in kern.log. Look for error messages - they might be helpful. Anyway, I assume you made it past the 4 dots after a reinstall?
|
Donate: 175WNXmJ1WVhFgVGKUqEhYtAQGRYAvqPA
|
|
|
Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 24, 2011, 03:11:23 AM |
|
Yeah, I have 4 cards but only 3 show up.
In that case, it sounds like a hardware/bios issue - make sure all the cards are seated properly, bios is configured etc. Sadly, I'm not too much help in that area. lspci should report anything whether the drivers are sane or not. Sometimes the kernel logs (at /var/log/kern.log) can hint at the problem. Running: grep pci /var/log/kern.log will search for pci related messages in kern.log. Look for error messages - they might be helpful. Anyway, I assume you made it past the 4 dots after a reinstall? Yep, it worked after the reinstall, I'll go look in the logs.
|
|
|
|
Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 24, 2011, 03:54:41 AM |
|
Yeah, I have 4 cards but only 3 show up.
In that case, it sounds like a hardware/bios issue - make sure all the cards are seated properly, bios is configured etc. Sadly, I'm not too much help in that area. lspci should report anything whether the drivers are sane or not. Sometimes the kernel logs (at /var/log/kern.log) can hint at the problem. Running: grep pci /var/log/kern.log will search for pci related messages in kern.log. Look for error messages - they might be helpful. Anyway, I assume you made it past the 4 dots after a reinstall? Yep, it worked after the reinstall, I'll go look in the logs. I think I've found a problem: "pci device is not a vga device"... *sigh*, now grub cannot read a file, I guess I have to boot from the live cd and copy files again..
|
|
|
|
Chick (OP)
Member
Offline
Activity: 70
Merit: 10
|
|
June 24, 2011, 09:02:30 AM |
|
Figured it out, two of my pci risers were defective... LOL, sorry for wasting you guy's time.
|
|
|
|
|