Baikal Giant X10

[pikachuy]

Long time lurker, first time poster! (Be gentle)

Sent an email to Baikal about the x10 only having 3x 6-pin connectors and pulling 800W. Got a replay saying "you will need total six 6 Pin connectors to power one Giant X10".

Still not sure this is going to be enough connectors since each 6-pin is only rated at 75W. Anyone have experience with pulling more than 75W per connector?

Where is this six connectors they are mentioning? Unless that photo on their website is just a prototype.

I wrote 266 watts each board cause x11 is about 800watts according to their site, so divide that by 3 for each board.

[sevenmiles]

Long time lurker, first time poster! (Be gentle)

Sent an email to Baikal about the x10 only having 3x 6-pin connectors and pulling 800W. Got a replay saying "you will need total six 6 Pin connectors to power one Giant X10".

Still not sure this is going to be enough connectors since each 6-pin is only rated at 75W. Anyone have experience with pulling more than 75W per connector?

Where is this six connectors they are mentioning? Unless that photo on their website is just a prototype.

I wrote 266 watts each board cause x11 is about 800watts according to their site, so divide that by 3 for each board.

Power supply:ATX Power(12V 6pin connectors * 3)
Interface:1 X Ethernet
Temp Operation：0 ~ 40 ℃
Dimension：312mm(L) x 125mm(W) x 130(H)
Weight：3700g

http://www.baikalminer.com/product09.php

only 3 6pin connectors

[bigassboy]

Long time lurker, first time poster! (Be gentle)

Sent an email to Baikal about the x10 only having 3x 6-pin connectors and pulling 800W. Got a replay saying "you will need total six 6 Pin connectors to power one Giant X10".

Still not sure this is going to be enough connectors since each 6-pin is only rated at 75W. Anyone have experience with pulling more than 75W per connector?

Where is this six connectors they are mentioning? Unless that photo on their website is just a prototype.

I wrote 266 watts each board cause x11 is about 800watts according to their site, so divide that by 3 for each board.

Power supply:ATX Power(12V 6pin connectors * 3)
Interface:1 X Ethernet
Temp Operation：0 ~ 40 ℃
Dimension：312mm(L) x 125mm(W) x 130(H)
Weight：3700g

http://www.baikalminer.com/product09.php

only 3 6pin connectors

the new x10 miners will comes with 6 x 6pin and not 3 x 6pin as stated

[bigjee]

Looking at the casing its almost like you can mod or cut the top part of the casing to make way for some cabling and then add a second fan at the back to make a push pull airflow setup.

[Tai_Pan]

Long time lurker, first time poster! (Be gentle)

Sent an email to Baikal about the x10 only having 3x 6-pin connectors and pulling 800W. Got a replay saying "you will need total six 6 Pin connectors to power one Giant X10".

Still not sure this is going to be enough connectors since each 6-pin is only rated at 75W. Anyone have experience with pulling more than 75W per connector?

Where is this six connectors they are mentioning? Unless that photo on their website is just a prototype.

I wrote 266 watts each board cause x11 is about 800watts according to their site, so divide that by 3 for each board.

Power supply:ATX Power(12V 6pin connectors * 3)
Interface:1 X Ethernet
Temp Operation：0 ~ 40 ℃
Dimension：312mm(L) x 125mm(W) x 130(H)
Weight：3700g

http://www.baikalminer.com/product09.php

only 3 6pin connectors

the new x10 miners will comes with 6 x 6pin and not 3 x 6pin as stated

Yes, that is true.
I just received answer from baikal tech after asking that question.It has 6 x 6 pin pci-e

[parker423]

Someone got already an confirmation that htey have receiverd the money by wire transfer?

[Tai_Pan]

Someone got already an confirmation that htey have receiverd the money by wire transfer?

Seeing how chaotic they do the selling I really don't think we will receive any confirmations.
Only the miners......hopefully.

[bigassboy]

Someone got already an confirmation that htey have receiverd the money by wire transfer?

Seeing how chaotic they do the selling I really don't think we will receive any confirmations.
Only the miners......hopefully.

Baikal did mentioned that they will reply back when the fund is received, I got the confirmation a few days back..

[Tai_Pan]

Someone got already an confirmation that htey have receiverd the money by wire transfer?

Seeing how chaotic they do the selling I really don't think we will receive any confirmations.
Only the miners......hopefully.

Baikal did mentioned that they will reply back when the fund is received, I got the confirmation a few days back..

Are you a nephew of theirs or something like that? 

[belaweb2]

Long time lurker, first time poster! (Be gentle)

Sent an email to Baikal about the x10 only having 3x 6-pin connectors and pulling 800W. Got a replay saying "you will need total six 6 Pin connectors to power one Giant X10".

Still not sure this is going to be enough connectors since each 6-pin is only rated at 75W. Anyone have experience with pulling more than 75W per connector?

Where is this six connectors they are mentioning? Unless that photo on their website is just a prototype.

I wrote 266 watts each board cause x11 is about 800watts according to their site, so divide that by 3 for each board.

Power supply:ATX Power(12V 6pin connectors * 3)
Interface:1 X Ethernet
Temp Operation：0 ~ 40 ℃
Dimension：312mm(L) x 125mm(W) x 130(H)
Weight：3700g

http://www.baikalminer.com/product09.php

only 3 6pin connectors

the new x10 miners will comes with 6 x 6pin and not 3 x 6pin as stated

Yes, that is true.
I just received answer from baikal tech after asking that question.It has 6 x 6 pin pci-e

THANKS 4 sharing!

[sevenmiles]

Someone got already an confirmation that htey have receiverd the money by wire transfer?

Seeing how chaotic they do the selling I really don't think we will receive any confirmations.
Only the miners......hopefully.

Baikal did mentioned that they will reply back when the fund is received, I got the confirmation a few days back..

When did you send the fund to them? I guess last Tuesday? wire or concurrency?
I wired them last Tuesday, but have not heard any fund received confirmation from them since then... not like before, their confirmation used to be quick

however, managed to get the confirmation from their skype support, but not sure this count or not

[jb7032]

All I got was "don't worry we will let you know once we have the funds". I sent the wire on Weds. I assume it's a pain for them with all of the people trying to send money. Never the less I assume they have my funds by now.

[bigassboy]

Someone got already an confirmation that htey have receiverd the money by wire transfer?

Seeing how chaotic they do the selling I really don't think we will receive any confirmations.
Only the miners......hopefully.

Baikal did mentioned that they will reply back when the fund is received, I got the confirmation a few days back..

When did you send the fund to them? I guess last Tuesday? wire or concurrency?
I wired them last Tuesday, but have not heard any fund received confirmation from them since then... not like before, their confirmation used to be quick

however, managed to get the confirmation from their skype support, but not sure this count or not

I wired the fund on Wednesday and got the confirmation on Friday, wire transfer could take up to 5 days depending on location, if i'm not mistaken..

[belaweb2]

got confirmation today

[jb7032]

Cool, hopefully my money went to the right place. My wife did the wire for me :/

[Kryptowolf512]

https://asicminermarket.com/product/baikal-giant-x10-dash-coin-miner/

Scam?

[Tai_Pan]

Cool, hopefully my money went to the right place. My wife did the wire for me :/

Double trouble for you then 

https://asicminermarket.com/product/baikal-giant-x10-dash-coin-miner/

Scam?

Many people on the internet say so.

[Steven3iii]

Long time lurker, first time poster! (Be gentle)

Sent an email to Baikal about the x10 only having 3x 6-pin connectors and pulling 800W. Got a replay saying "you will need total six 6 Pin connectors to power one Giant X10".

Still not sure this is going to be enough connectors since each 6-pin is only rated at 75W. Anyone have experience with pulling more than 75W per connector?

Where is this six connectors they are mentioning? Unless that photo on their website is just a prototype.

I wrote 266 watts each board cause x11 is about 800watts according to their site, so divide that by 3 for each board.

Power supply:ATX Power(12V 6pin connectors * 3)
Interface:1 X Ethernet
Temp Operation：0 ~ 40 ℃
Dimension：312mm(L) x 125mm(W) x 130(H)
Weight：3700g

http://www.baikalminer.com/product09.php

only 3 6pin connectors

the new x10 miners will comes with 6 x 6pin and not 3 x 6pin as stated

Yes, that is true.
I just received answer from baikal tech after asking that question.It has 6 x 6 pin pci-e

6 pins x6? How many power supplies is that to run them? What connectors do you use? <buys fire extinguisher> 

[LazyJones]

Sent them an e-mail, missed the presale, hopefully will be in on number 2.

[maleemk]

Cool, hopefully my money went to the right place. My wife did the wire for me :/

Double trouble for you then 

https://asicminermarket.com/product/baikal-giant-x10-dash-coin-miner/

Scam?

Many people on the internet say so.

Nope not scam, they are just resellers and markedUp prices. and i have bought many baikal miners from them.