I need help with my Antminer s9 (August 2017 Batch)

Hello,

I received my miner from Bitmain's repair location in Commerce, CA. The original issue was one of the hashboards was not hashing.

I plugin and setup the miner when I received it, and there was a Socket connect failed: Connection refused error.

I went ahead and installed the latest firmware from Bitmains website. I installed the latest one. I also set my mining pool and configuration.
https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D

When I do this, the socket error goes away and the miner seems to keep turning on and off. It runs at normal speed with all hashboards indicating red lights, with a blinking Green Normal light. Then, the Normal Light stops blinking and goes to solid green. The miner then resets itself and does the same exact thing.

It ran like this for a day without any success.

Here is a screen shot of the miner user interface System.

https://ibb.co/iRAGya

Here is the Miner Status.

https://ibb.co/iB8x4F

Here is my logs
Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000306] ps7-ttc #0 at f0006000, irq=43
[    0.000614] Console: colour dummy device 80x30
[    0.000651] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040209] pid_max: default: 32768 minimum: 301
[    0.040431] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040452] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042593] CPU: Testing write buffer coherency: ok
[    0.042943] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043002] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043222] L310 cache controller enabled
[    0.043242] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121035] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210387] CPU: All CPU(s) started in SVC mode.
[    0.211032] devtmpfs: initialized
[    0.213447] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214647] regulator-dummy: no parameters
[    0.221864] NET: Registered protocol family 16
[    0.224160] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226443] cpuidle: using governor ladder
[    0.226455] cpuidle: using governor menu
[    0.233812] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235315] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235330] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235436] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257218] bio: create slab <bio-0> at 0
[    0.258635] vgaarb: loaded
[    0.259351] SCSI subsystem initialized
[    0.260358] usbcore: registered new interface driver usbfs
[    0.260545] usbcore: registered new interface driver hub
[    0.260771] usbcore: registered new device driver usb
[    0.261332] media: Linux media interface: v0.10
[    0.261489] Linux video capture interface: v2.00
[    0.261726] pps_core: LinuxPPS API ver. 1 registered
[    0.261738] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.261859] PTP clock support registered
[    0.262210] EDAC MC: Ver: 3.0.0
[    0.263272] Advanced Linux Sound Architecture Driver Initialized.
[    0.266112] DMA-API: preallocated 4096 debug entries
[    0.266126] DMA-API: debugging enabled by kernel config
[    0.266204] Switched to clocksource arm_global_timer
[    0.286765] NET: Registered protocol family 2
[    0.287413] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287509] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287668] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287730] TCP: reno registered
[    0.287749] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287797] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288069] NET: Registered protocol family 1
[    0.288402] RPC: Registered named UNIX socket transport module.
[    0.288413] RPC: Registered udp transport module.
[    0.288422] RPC: Registered tcp transport module.
[    0.288430] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288444] PCI: CLS 0 bytes, default 64
[    0.288879] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290887] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292279] bounce pool size: 64 pages
[    0.293183] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293385] msgmni has been set to 1486
[    0.294168] io scheduler noop registered
[    0.294181] io scheduler deadline registered
[    0.294220] io scheduler cfq registered (default)
[    0.303441] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.303461] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427596] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.000679] console [ttyPS0] enabled
[    1.004975] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.012620] [drm] Initialized drm 1.1.0 20060810
[    1.029706] brd: module loaded
[    1.039069] loop: module loaded
[    1.048689] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.054441] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.062346] libphy: XEMACPS mii bus: probed
[    1.066832] ------------- phy_id = 0x3625e62
[    1.071551] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.080180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.086914] ehci-pci: EHCI PCI platform driver
[    1.094121] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.100958] usbcore: registered new interface driver usb-storage
[    1.107844] mousedev: PS/2 mouse device common for all mice
[    1.113947] i2c /dev entries driver
[    1.120860] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.126373] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.132246] Xilinx Zynq CpuIdle Driver started
[    1.137128] sdhci: Secure Digital Host Controller Interface driver
[    1.143220] sdhci: Copyright(c) Pierre Ossman
[    1.147647] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.154379] mmc0: no vqmmc regulator found
[    1.158427] mmc0: no vmmc regulator found
[    1.196221] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204909] usbcore: registered new interface driver usbhid
[    1.210423] usbhid: USB HID core driver
[    1.215147] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221449] nand: Micron MT29F2G08ABAEAWP
[    1.225414] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231358] Bad block table found at page 131008, version 0x01
[    1.237583] Bad block table found at page 130944, version 0x01
[    1.243633] 3 ofpart partitions found on MTD device pl353-nand
[    1.249414] Creating 3 MTD partitions on "pl353-nand":
[    1.254509] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262558] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269879] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.278814] TCP: cubic registered
[    1.282052] NET: Registered protocol family 17
[    1.286767] Registering SWP/SWPB emulation handler
[    1.292681] regulator-dummy: disabling
[    1.297030] UBI: attaching mtd1 to ubi0
[    1.824851] UBI: scanning is finished
[    1.836508] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.843560] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850346] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857032] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863870] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869881] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876991] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1411313766
[    1.886005] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895238] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.895243] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899205] ALSA device list:
[    1.899208]   No soundcards found.
[    1.915580] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.944984] UBIFS: recovery needed
[    2.026449] UBIFS: recovery completed
[    2.030128] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.036053] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.045197] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.055109] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.060116] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E7000DF8-CAC1-4941-A278-188D954B7F71, small LPT model
[    2.071398] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.078583] devtmpfs: mounted
[    2.081686] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.926080] random: dd urandom read with 0 bits of entropy available
[    3.316243] 
[    3.316243] bcm54xx_config_init
[    3.926236] 
[    3.926236] bcm54xx_config_init
[    7.927065] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.933170] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.440050] In axi fpga driver!
[   25.443118] request_mem_region OK!
[   25.446547] AXI fpga dev virtual address is 0xf01fe000
[   25.451615] *base_vir_addr = 0x8c510
[   25.466607] In fpga mem driver!
[   25.469759] request_mem_region OK!
[   25.473325] fpga mem virtual address is 0xf3000000
[   26.266223] 
[   26.266223] bcm54xx_config_init
[   26.896252] 
[   26.896252] bcm54xx_config_init
[   30.897067] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.903171] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8030d58a72f10854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:32] [63:80] [63:67] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[12] has core num=1
Chain[5] ASIC[20] has core num=1
Chain[5] ASIC[44] has core num=5
Chain[5] ASIC[46] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:32] [63:71] [63:53] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[4] has core num=1
Chain[6] ASIC[11] has core num=2
Chain[6] ASIC[14] has core num=1
Chain[6] ASIC[15] has core num=3
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[18] has core num=1
Chain[6] ASIC[19] has core num=1
Chain[6] ASIC[20] has core num=1
Chain[6] ASIC[23] has core num=1
Chain[6] ASIC[26] has core num=2
Chain[6] ASIC[29] has core num=1
Chain[6] ASIC[30] has core num=11
Chain[6] ASIC[32] has core num=2
Chain[6] ASIC[35] has core num=1
Chain[6] ASIC[37] has core num=1
Chain[6] ASIC[41] has core num=1
Chain[6] ASIC[42] has core num=2
Chain[6] ASIC[43] has core num=1
Chain[6] ASIC[44] has core num=1
Chain[6] ASIC[47] has core num=1
Chain[6] ASIC[49] has core num=1
Chain[6] ASIC[53] has core num=1
Chain[6] ASIC[58] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:32] [63:67] [63:80] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[43] has core num=4
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-3,0,0,0,0,0,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-2,0,0,0,0,0,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-1,0,0,0,0,0,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1376 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=21193 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 8337 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=27973 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Tue Aug 15 11:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8030d58a72f10854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
chain[5]: [63:22] [63:5] [63:24] [63:32] [63:80] [63:67] [63:255] [63:255]
Chain[J6] has backup chain_voltage=900
Chain[J6] test patten OK temp=64
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:32] [63:71] [63:53] [63:255] [63:255]
Chain[J7] has backup chain_voltage=890
Chain[J7] test patten OK temp=62
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:32] [63:67] [63:80] [63:255] [63:255]
Chain[J8] has backup chain_voltage=900
Chain[J8] test patten OK temp=62
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=74 value=900
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[20] has core num=1
Chain[J6] ASIC[44] has core num=5
Chain[J6] ASIC[46] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[4] has core num=1
Chain[J7] ASIC[11] has core num=2
Chain[J7] ASIC[14] has core num=1
Chain[J7] ASIC[15] has core num=3
Chain[J7] ASIC[16] has core num=1
Chain[J7] ASIC[18] has core num=1
Chain[J7] ASIC[19] has core num=1
Chain[J7] ASIC[20] has core num=1
Chain[J7] ASIC[23] has core num=1
Chain[J7] ASIC[26] has core num=2
Chain[J7] ASIC[29] has core num=1
Chain[J7] ASIC[30] has core num=11
Chain[J7] ASIC[32] has core num=2
Chain[J7] ASIC[35] has core num=1
Chain[J7] ASIC[37] has core num=1
Chain[J7] ASIC[41] has core num=1
Chain[J7] ASIC[42] has core num=2
Chain[J7] ASIC[43] has core num=1
Chain[J7] ASIC[44] has core num=1
Chain[J7] ASIC[47] has core num=1
Chain[J7] ASIC[49] has core num=1
Chain[J7] ASIC[53] has core num=1
Chain[J7] ASIC[58] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[43] has core num=4
miner total rate=13999GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=-3
Chain:5 base freq=587
Asic[ 0]:625 
Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:637 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:637 Asic[ 7]:668 Asic[ 8]:668 
Asic[ 9]:612 Asic[10]:668 Asic[11]:668 Asic[12]:587 Asic[13]:668 Asic[14]:668 Asic[15]:643 Asic[16]:668 
Asic[17]:668 Asic[18]:662 Asic[19]:668 Asic[20]:593 Asic[21]:668 Asic[22]:668 Asic[23]:668 Asic[24]:668 
Asic[25]:668 Asic[26]:637 Asic[27]:668 Asic[28]:637 Asic[29]:668 Asic[30]:668 Asic[31]:668 Asic[32]:668 
Asic[33]:668 Asic[34]:668 Asic[35]:662 Asic[36]:668 Asic[37]:668 Asic[38]:662 Asic[39]:668 Asic[40]:675 
Asic[41]:668 Asic[42]:675 Asic[43]:668 Asic[44]:587 Asic[45]:675 Asic[46]:593 Asic[47]:675 Asic[48]:668 
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:662 Asic[56]:606 
Asic[57]:650 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:625 Asic[62]:675 
Chain:5 max freq=675
Chain:5 min freq=587

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.3V
Chain:6 temp offset=-4
Chain:6 base freq=687
Asic[ 0]:656 
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:6 max freq=662
Chain:6 min freq=656

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.1V
Chain:7 temp offset=-3
Chain:7 base freq=581
Asic[ 0]:625 
Asic[ 1]:643 Asic[ 2]:625 Asic[ 3]:625 Asic[ 4]:643 Asic[ 5]:650 Asic[ 6]:625 Asic[ 7]:643 Asic[ 8]:650 
Asic[ 9]:625 Asic[10]:643 Asic[11]:650 Asic[12]:625 Asic[13]:643 Asic[14]:650 Asic[15]:625 Asic[16]:643 
Asic[17]:650 Asic[18]:631 Asic[19]:581 Asic[20]:650 Asic[21]:631 Asic[22]:581 Asic[23]:650 Asic[24]:618 
Asic[25]:643 Asic[26]:650 Asic[27]:637 Asic[28]:631 Asic[29]:656 Asic[30]:643 Asic[31]:643 Asic[32]:612 
Asic[33]:643 Asic[34]:643 Asic[35]:593 Asic[36]:643 Asic[37]:625 Asic[38]:625 Asic[39]:643 Asic[40]:631 
Asic[41]:656 Asic[42]:643 Asic[43]:581 Asic[44]:618 Asic[45]:643 Asic[46]:637 Asic[47]:637 Asic[48]:643 
Asic[49]:643 Asic[50]:631 Asic[51]:643 Asic[52]:643 Asic[53]:631 Asic[54]:625 Asic[55]:625 Asic[56]:656 
Asic[57]:643 Asic[58]:650 Asic[59]:643 Asic[60]:643 Asic[61]:593 Asic[62]:637 
Chain:7 max freq=656
Chain:7 min freq=581


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=-3
Chain:5 base freq=587
Asic[ 0]:625 
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637 
Asic[ 9]:612 Asic[10]:637 Asic[11]:637 Asic[12]:587 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:593 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637 
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637 
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637 
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:587 Asic[45]:637 Asic[46]:593 Asic[47]:637 Asic[48]:637 
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:606 
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:625 Asic[62]:643 
Chain:5 max freq=643
Chain:5 min freq=587

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.3V
Chain:6 temp offset=-4
Chain:6 base freq=687
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637 
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637 
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637 
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637 
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637 
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637 
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637 
Chain:6 max freq=637
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.1V
Chain:7 temp offset=-3
Chain:7 base freq=581
Asic[ 0]:625 
Asic[ 1]:643 Asic[ 2]:625 Asic[ 3]:625 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:625 Asic[ 7]:643 Asic[ 8]:643 
Asic[ 9]:625 Asic[10]:643 Asic[11]:643 Asic[12]:625 Asic[13]:643 Asic[14]:643 Asic[15]:625 Asic[16]:643 
Asic[17]:643 Asic[18]:631 Asic[19]:581 Asic[20]:650 Asic[21]:631 Asic[22]:581 Asic[23]:650 Asic[24]:618 
Asic[25]:643 Asic[26]:650 Asic[27]:637 Asic[28]:631 Asic[29]:650 Asic[30]:643 Asic[31]:643 Asic[32]:612 
Asic[33]:643 Asic[34]:643 Asic[35]:593 Asic[36]:643 Asic[37]:625 Asic[38]:625 Asic[39]:643 Asic[40]:631 
Asic[41]:650 Asic[42]:643 Asic[43]:581 Asic[44]:618 Asic[45]:643 Asic[46]:637 Asic[47]:637 Asic[48]:643 
Asic[49]:643 Asic[50]:631 Asic[51]:643 Asic[52]:643 Asic[53]:631 Asic[54]:625 Asic[55]:625 Asic[56]:650 
Asic[57]:643 Asic[58]:650 Asic[59]:643 Asic[60]:643 Asic[61]:593 Asic[62]:637 
Chain:7 max freq=650
Chain:7 min freq=581

max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,-3,0,0,0,0,0,0
chain[5] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-3 typeID=55
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=6.24100 Asic[02]=5.88800 Asic[03]=5.95500 Asic[04]=5.98900 Asic[05]=6.14000 Asic[06]=5.95500 Asic[07]=6.17400 Asic[08]=6.14000 
Asic[09]=6.12300 Asic[10]=5.98900 Asic[11]=6.09000 Asic[12]=6.12300 Asic[13]=5.88800 Asic[14]=5.97200 Asic[15]=5.98900 Asic[16]=5.95500 
Asic[17]=6.03900 Asic[18]=5.97200 Asic[19]=5.98900 Asic[20]=6.14000 Asic[21]=5.98900 Asic[22]=5.83800 Asic[23]=6.09000 Asic[24]=5.88800 
Asic[25]=6.12300 Asic[26]=6.14000 Asic[27]=6.14000 Asic[28]=6.03900 Asic[29]=6.66000 Asic[30]=6.17400 Asic[31]=5.78800 Asic[32]=5.98900 
Asic[33]=73.4670 Asic[34]=5.93900 Asic[35]=5.98900 Asic[36]=6.03900 Asic[37]=6.17400 Asic[38]=6.14000 Asic[39]=6.03900 Asic[40]=6.03900 
Asic[41]=5.92200 Asic[42]=6.14000 Asic[43]=5.98900 Asic[44]=5.98900 Asic[45]=5.98900 Asic[46]=6.12300 Asic[47]=5.95500 Asic[48]=5.75400 
Asic[49]=5.78800 Asic[50]=5.97200 Asic[51]=5.98900 Asic[52]=6.12300 Asic[53]=6.03900 Asic[54]=6.12300 Asic[55]=6.03900 Asic[56]=6.14000 
Asic[57]=6.39200 Asic[58]=5.90500 Asic[59]=6.12300 Asic[60]=6.03900 Asic[61]=6.12300 Asic[62]=5.78800 Asic[63]=6.17400 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=5.48600 Asic[02]=5.16700 Asic[03]=5.18400 Asic[04]=5.23400 Asic[05]=5.38500 Asic[06]=5.20000 Asic[07]=5.41900 Asic[08]=5.36800 
Asic[09]=5.38500 Asic[10]=5.28400 Asic[11]=5.35100 Asic[12]=5.36800 Asic[13]=5.28400 Asic[14]=32.4470 Asic[15]=5.25100 Asic[16]=5.21700 
Asic[17]=5.25100 Asic[18]=5.25100 Asic[19]=5.25100 Asic[20]=5.38500 Asic[21]=5.46900 Asic[22]=5.13300 Asic[23]=5.28400 Asic[24]=5.13300 
Asic[25]=5.36800 Asic[26]=5.38500 Asic[27]=5.38500 Asic[28]=5.33500 Asic[29]=5.88800 Asic[30]=5.41900 Asic[31]=5.06600 Asic[32]=5.28400 
Asic[33]=5.06600 Asic[34]=5.20000 Asic[35]=5.25100 Asic[36]=5.28400 Asic[37]=5.38500 Asic[38]=5.41900 Asic[39]=5.28400 Asic[40]=5.28400 
Asic[41]=5.21700 Asic[42]=5.41900 Asic[43]=5.23400 Asic[44]=10.9050 Asic[45]=5.38500 Asic[46]=5.36800 Asic[47]=5.36800 Asic[48]=32.2450 
Asic[49]=5.06600 Asic[50]=13.5890 Asic[51]=5.25100 Asic[52]=5.40200 Asic[53]=5.36800 Asic[54]=5.36800 Asic[55]=5.28400 Asic[56]=5.38500 
Asic[57]=5.73700 Asic[58]=5.16700 Asic[59]=5.33500 Asic[60]=5.28400 Asic[61]=5.38500 Asic[62]=5.16700 Asic[63]=5.38500 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=5.11700 Asic[02]=4.88200 Asic[03]=4.84800 Asic[04]=4.88200 Asic[05]=5.06600 Asic[06]=4.88200 Asic[07]=5.03300 Asic[08]=5.03300 
Asic[09]=5.03300 Asic[10]=4.91500 Asic[11]=5.03300 Asic[12]=5.06600 Asic[13]=4.91500 Asic[14]=30.4500 Asic[15]=4.94900 Asic[16]=4.83100 
Asic[17]=87.4260 Asic[18]=4.91500 Asic[19]=4.91500 Asic[20]=4.88200 Asic[21]=5.13300 Asic[22]=4.78100 Asic[23]=4.83100 Asic[24]=4.84800 
Asic[25]=4.94900 Asic[26]=5.06600 Asic[27]=5.06600 Asic[28]=4.99900 Asic[29]=5.60300 Asic[30]=5.10000 Asic[31]=4.76400 Asic[32]=4.94900 
Asic[33]=4.71400 Asic[34]=4.88200 Asic[35]=4.91500 Asic[36]=4.74700 Asic[37]=5.06600 Asic[38]=5.03300 Asic[39]=4.91500 Asic[40]=4.94900 
Asic[41]=4.86500 Asic[42]=5.06600 Asic[43]=4.91500 Asic[44]=10.0830 Asic[45]=4.94900 Asic[46]=5.03300 Asic[47]=5.03300 Asic[48]=30.2150 
Asic[49]=4.76400 Asic[50]=12.7500 Asic[51]=4.89800 Asic[52]=5.06600 Asic[53]=5.03300 Asic[54]=4.94900 Asic[55]=4.91500 Asic[56]=5.03300 
Asic[57]=5.46900 Asic[58]=4.83100 Asic[59]=5.03300 Asic[60]=5.03300 Asic[61]=5.03300 Asic[62]=4.71400 Asic[63]=5.03300 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=28
Chain[5] Chip[62] local Temp=55
Chain[5] Chip[62] middle Temp=67
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=28
Chain[6] Chip[62] local Temp=49
Chain[6] Chip[62] middle Temp=62
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=52
Chain[7] Chip[62] middle Temp=64
Done read temp on Chain[7]
set FAN speed according to: temp_highest=55 temp_top1[PWM_T]=55 temp_top1[TEMP_POS_LOCAL]=55 temp_change=0 fix_fan_steps=0
FAN PWM: 60
read_temp_func Done!
CRC error counter=0
(Moderator note: This post was edited by frodocooper to use code tags.)