Ethereum Mining Rig Black Screen (Not working)

[kujaku1337]

Hello guys,

I have some difficulties with my mining rig. I started a big project with 6 Mining Rigs. To evaluate the project i use this setup:

RAM: Crucial 4GB DDR4
Mainboard: MSI Pro Solution Intel Z170A
CPU: Intel DUal Core Celeron G3950/3000
Disk: DREVO X1 Series 60GB SSD
GPU: 1x Nvidia 1070 WF 8GB
Power Supply: Corsair CP-9020094-EU RMX Serie RM1000X ATX 1000w
GPU Adapter: PCI Express USB 3.0 Riser 1x to 16x Monero
OS: Simplemining.net

I put all the parts together. When I turn on the Rig the Fans start moving and a Red Light start for a few seconds.
But I don't receive a picture on my screen. I used different monitors and cables. It still doesn't work.

I tried to plug in the GPU just with the Adapter for power and then I tested it with additional power supply. It still doesn't work.


Please help me guys. I spend a lot of money on that project!



Thank you very much.



Best Regards,
Dean


Here are the pictures of the "Rig"
https://imgur.com/a/0d8EX


 

[1714972609]

1714972609

[1714972609]

1714972609

[1714972609]

1714972609

[1714972609]

1714972609

[1714972609]

1714972609

[leonix007]

Hello guys,

I have some difficulties with my mining rig. I started a big project with 6 Mining Rigs. To evaluate the project i use this setup:

RAM: Crucial 4GB DDR4
Mainboard: MSI Pro Solution Intel Z170A
CPU: Intel DUal Core Celeron G3950/3000
Disk: DREVO X1 Series 60GB SSD
GPU: 1x Nvidia 1070 WF 8GB
Power Supply: Corsair CP-9020094-EU RMX Serie RM1000X ATX 1000w
GPU Adapter: PCI Express USB 3.0 Riser 1x to 16x Monero
OS: Simplemining.net

I put all the parts together. When I turn on the Rig the Fans start moving and a Red Light start for a few seconds.
But I don't receive a picture on my screen. I used different monitors and cables. It still doesn't work.

I tried to plug in the GPU just with the Adapter for power and then I tested it with additional power supply. It still doesn't work.


Please help me guys. I spend a lot of money on that project!



Thank you very much.



Best Regards,
Dean


Here are the pictures of the "Rig"
https://imgur.com/a/0d8EX

For isolation purpose, Don't use riser first, plugged in the 1070 card to the main PCI-e Slot, make sure that the main board power has plugged properly the 24pins and 8pins, try to bootup, if nothing happens, removed vcard and use the onboard.
 

[kujaku1337]

Thank you for your answer.


I tried that. Nothing happens. When i start with the onboard GPU the CPU Fan was faster.


Any other ideas?