AMD Catalyst™ 13.6 Windows® Beta Driver

[pekv2]

And yes, for disabling flash gpu accel, the person would need to open youtube, or some sort that can play flash, right click on the vid screen, settings and disable gpu accel.

this tweak should increase perf in some way?

By disabling it, if you're mining on a machine where you watch youtube videos, GPU performance should not be interrupted. But if it is enabled, and you watch youtube videos, flash will use gpu accel=meaning flash will use graphics devices. But if you don't mine, it's good to have enabled for better flash performance.

[efx]

13.6 is working well here.

[BlazinBeaches]

So the verdict is you still need dummy plugs if you want to use HD graphics as primary and AMDs for mining?  Does it at least enable the option of voltage control with a setup like this?  I was unable to control voltage in afterburner with a setup like this using the prior beta drivers, I have to have my monitor plugged into one of the AMD cards to have full control, which sucks a good portion of the mining life out of that card.

Just curious, soon enough I'll have dedicated rigs so it won't matter.  If I get a chance though if nobody else knows, I might test this later and I'll report back.

I also wonder if the results are mobo dependent.  I know some mobos use autodetect for GPUs while the one I'm using is MSI and I have to choose one or the other.  I wonder if the autodetect on some mobos enables both at the same time if they are both plugged in which is why some users report success.

[reb0rn21]

I tested 13.6 with Windows 8 i need dummy plug only on primary 7950, rest 3x don`t need the dummy......... duno about win7

[pekv2]

Bump.