XMOS - Light Weight Linux Base ETH Mining OS - Optimal for Nvidia GPU V2.0

[overcool]

Hi,

This seems great I am waiting for my 1070's to be delivered this week. Just one question do you have plans for dual mining on this OS?

Chris

Hi gcvanasel,

Thank You for give me a try. Nvidia GTX 1070 is a good GPU for Mining use.

Please ket me know the result soon..

Happy Mining... ^_^

[overcool]

I have a crazy idea, can XMOS run on xbox ?
thanks Ros

You can download and have a try and let me know the result...

[Trimqemali]

I cant boot xma from my usb. I just get the error below and then a blank screen. I do have only one asus 1060 oc card on my pci slot.
Checked dhcp, however no new ip discovered from DHCP.

https://ibb.co/fKME1G

Hi Trimqemali,

You can press Control + Alt + F1 for login.
User id:- prospector
Pass:- letmein3061

please run command ifconfig to check network connection,
Ip address also showing they..


Happy Mining.. ^_^

I managed to login now .. Thanks ... however i do have very low hash rate. My Asus 1060 wont go more then 3.9 MHs,
CPU TEMP:- 30
System Uptime:- 35 minutes
GPUS Installed:- 1 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1060 6GB, 31.93 W, 88 %, 32, 569 MHz, 810 MHz

And here is my config:
NV_OC="1"     # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2"   # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="-90"
NV_CLOCK="-180"
NV_MEM="-1450"
NV_FAN="88"

Also on AUTO i do get the same POWER and HASHRATE... my card is powerfull isnt it ?

[OverEasy]

I cant boot xma from my usb. I just get the error below and then a blank screen. I do have only one asus 1060 oc card on my pci slot.
Checked dhcp, however no new ip discovered from DHCP.

Hi Trimqemali,

You can press Control + Alt + F1 for login.
User id:- prospector
Pass:- letmein3061

please run command ifconfig to check network connection,
Ip address also showing they..


Happy Mining.. ^_^

I managed to login now .. Thanks ... however i do have very low hash rate. My Asus 1060 wont go more then 3.9 MHs,
CPU TEMP:- 30
System Uptime:- 35 minutes
GPUS Installed:- 1 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1060 6GB, 31.93 W, 88 %, 32, 569 MHz, 810 MHz

And here is my config:
NV_OC="1"     # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2"   # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="-90"
NV_CLOCK="-180"
NV_MEM="-1450"
NV_FAN="88"

Also on AUTO i do get the same POWER and HASHRATE... my card is powerfull isnt it ?

The watts and mhz look way to low. Check your PSU and riser cables. Somethings wrong.
Try running claymore miner for a comparison to see if its the card or the miner config.
My 1060 3gbs get about 19 mhs with no modding at all.
Also that nv-mem you can boost to 4000+
So maybe try that ( a little at a time)

[overcool]

I cant boot xma from my usb. I just get the error below and then a blank screen. I do have only one asus 1060 oc card on my pci slot.
Checked dhcp, however no new ip discovered from DHCP.

https://ibb.co/fKME1G

Hi Trimqemali,

You can press Control + Alt + F1 for login.
User id:- prospector
Pass:- letmein3061

please run command ifconfig to check network connection,
Ip address also showing they..


Happy Mining.. ^_^

I managed to login now .. Thanks ... however i do have very low hash rate. My Asus 1060 wont go more then 3.9 MHs,
CPU TEMP:- 30
System Uptime:- 35 minutes
GPUS Installed:- 1 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1060 6GB, 31.93 W, 88 %, 32, 569 MHz, 810 MHz

And here is my config:
NV_OC="1"     # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2"   # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="-90"
NV_CLOCK="-180"
NV_MEM="-1450"
NV_FAN="88"

Also on AUTO i do get the same POWER and HASHRATE... my card is powerfull isnt it ?

Hi,
I think you put a wrong setting. For GTX 1060 maybe you can try this setting.
And here is my config:
NV_OC="1"     # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2"   # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="85"          # this to set max watt for the GPU is 85watt if not stable can put higher max is 120 for 1060
NV_CLOCK="-100"     # set Core Clock -100
NV_MEM="1450"        # Set 1450 MHz to the memory speed
NV_FAN="88"             # Set fan speed to 88%

On gstatus out put screen, make sure the memory speed is more then 4000MHz.
Most of the DDR5 memory is stable at 4000-4200MHz
Please find out the stable setting for ur card...

Happy Mining ^_^

[overcool]

New release is coming very soon... on testing now... ^_^

[kcopcu]

New release is coming very soon... on testing now... ^_^

Cool project , i'm currently trying .

Best

[Trimqemali]

After changing the PSU to Cooler Master 450W, i do have higher hashrate now:
#192.168.0.100 [15.46Mh/s] [/home/prospector ]# gstatus
CPU TEMP:- 33
System Uptime:- 2 hours, 44 minutes
GPUS Installed:- 1 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1060 6GB, 98.00 W, 90 %, 58, 1721 MHz, 3802 MHz
#192.168.0.100 [15.45Mh/s] [/home/prospector ]#

Can i improve the hash rate more with Manual Overcloacking as this is with Auto_OC ?

[overcool]

After changing the PSU to Cooler Master 450W, i do have higher hashrate now:
#192.168.0.100 [15.46Mh/s] [/home/prospector ]# gstatus
CPU TEMP:- 33
System Uptime:- 2 hours, 44 minutes
GPUS Installed:- 1 Pcs
name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz]
GeForce GTX 1060 6GB, 98.00 W, 90 %, 58, 1721 MHz, 3802 MHz
#192.168.0.100 [15.45Mh/s] [/home/prospector ]#

Can i improve the hash rate more with Manual Overcloacking as this is with Auto_OC ?

Hi Trimqemali,

Maybe you can try this setting:-
NV_OC="1"     # "1" Enable Nvidia Overclock, "0" Disable Nvidia Overclock
OC_MODE="2"   # "1" Enable Auto Overclock, "2" Manual Overclock Setting, "3" Fo$

NV_WATT="85"          # this to set max watt for the GPU is 85watt if not stable can put higher, max is 120 for 1060
NV_CLOCK="-100"     # set Core Clock -100
NV_MEM="1450"        # Set 1450 MHz to the memory speed
NV_FAN="88"             # Set fan speed to 88%

On gstatus out put screen, make sure the memory speed is more then 4000MHz.
Most of the DDR5 memory is stable at 4000-4200MHz
Please find out the stable setting for ur card...

Happy Mining ^_^

[Trimqemali]

Just an update for 1060 6gb owner ... the proposed config its not stable at all and crashes the miner. So far my best experiment is with the following config:
NV_WATT="110"
NV_CLOCK="100"
NV_MEM="935"
NV_FAN="88"

After 20 Min i got from 15 MHs up to 19 MHs ... hopefully will do better very soon. However I'm not satisfied as I'm reading on internet that ppl on Win get up to 25 MHs with this GPU, which is +25% of what I'm getting.
Hopping for better, any help will be very much appreciated. XMOS Rocks

[Elite.Coin]

Hi,
Here's my settings using a Zoltac gtx 1060

MY_WATT='80'
MY_CLOCK='100'
MY_MEM='1100'
MY_FAN='85'

I currently get about 276 mh/s on 12 miners or about 23 mh/s per gpu.. That the exact same has as I get on my Windows Miner.

https://preview.ibb.co/gjSkWG/Zeus_2_1042017_103506_PM.png

Just an update for 1060 6gb owner ... the proposed config its not stable at all and crashes the miner. So far my best experiment is with the following config:
NV_WATT="110"
NV_CLOCK="100"
NV_MEM="935"
NV_FAN="88"

After 20 Min i got from 15 MHs up to 19 MHs ... hopefully will do better very soon. However I'm not satisfied as I'm reading on internet that ppl on Win get up to 25 MHs with this GPU, which is +25% of what I'm getting.
Hopping for better, any help will be very much appreciated. XMOS Rocks

[Elite.Coin]

Awesome!!!! Looking forward to it.

When can we expect to see this new version?

What features are you including?

New release is coming very soon... on testing now... ^_^

[Trimqemali]

Your setting does not work with my Gigabyte 1060 OC Windforce ... It stops the FAN and my GPU went up to 87 C
it should be NV instead of MY in the confing and ' instead of "
MY_WATT='80'   -> NV_WATT='80'
MY_CLOCK='100'  -> NV_CLOCK='100'
MY_MEM='1100' ->  NV_MEM='1100'
MY_FAN='85'  -> MY_FAN='85'

I could easily burn my GPU today... so please be careful what you paste !

Hi,
Here's my settings using a Zoltac gtx 1060

MY_WATT='80'
MY_CLOCK='100'
MY_MEM='1100'
MY_FAN='85'

I currently get about 276 mh/s on 12 miners or about 23 mh/s per gpu.. That the exact same has as I get on my Windows Miner.

[Tigel]

Looks good, I am running two rigs with this currently.

Few notes:
- I set my timezone with setup (GMT+3) and time is three hours off.. but in order to solve this there shold be several tutorials.
- some kind of alert in case of reboot would be nice
- some kind of summary/dash screen would also be nice

Thanks so far!

--
Tigel

[overcool]

Looks good, I am running two rigs with this currently.

Few notes:
- I set my timezone with setup (GMT+3) and time is three hours off.. but in order to solve this there shold be several tutorials.
- some kind of alert in case of reboot would be nice
- some kind of summary/dash screen would also be nice

Thanks so far!

--
Tigel

Hi Tigel,

TQ for trying XMOS...

1. For time setting on ubuntu you can google it, my current configuration is follow bios time.
2. You mean when alert when "cuda error" deducted before restart the rigs?
3. You can use gstatus as simple summary .

Happy Mining ... ^_^

[rigmoulin]

Hello all,   new on the board .
english not my first language .

Newbie as well in mining, I gave a try  to Cyclenerd scrip t .
That script is a bit confusing to understand, then , if time I will write a tutorial .

Without script , I run   4x Evga 1060Gb  6G  SC  

drivers 384-90 nvidia   Cuda 9.0

stock   ~19.5 Mh/s with etherminer cuda from github
with a bit of overclocking    stable  23.4Mh/s     +125 clock  +1200 mem

connected via ssh to the headless rig  

I run those commands

sudo nvidia-xconfig -a --cool-bits=31 --allow-empty-initial-configuration  (you can try --coolbits=28)

###  REBOOT######


export XAUTHORITY=/var/run/lightdm/root/:0
export DISPLAY=:0

export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100

nvidia-settings -a [gpu:0]/GpuPowerMizerMode=1
nvidia-settings -a /GpuPowerMizerMode=1
nvidia-settings -a /GPUMemoryTransferRateOffset[3]=1200
nvidia-settings -a /GPUGraphicsClockOffset[3]=125


sudo nvidia-smi -pm 1
sudo nvidia-smi -pl 77

ethminer --farm-recheck 2000 -RH -U -S "eu1.ethermine.org:4444" -FS "us1.ethermine.org:4444" -O   oX----adress ethermine----.name of the rig



Nice to meet you

[overcool]

Hello all,   new on the board .
english not my first language .

Newbie as well in mining, I gave a try  to Cyclenerd scrip t .
That script is a bit confusing to understand, then , if time I will write a tutorial .

Without script , I run   4x Evga 1060Gb  6G  SC  

drivers 384-90 nvidia   Cuda 9.0

stock   ~19.5 Mh/s with etherminer cuda from github
with a bit of overclocking    stable  23.4Mh/s     +125 clock  +1200 mem

connected via ssh to the headless rig  

I run those commands

sudo nvidia-xconfig -a --cool-bits=31 --allow-empty-initial-configuration  (you can try --coolbits=28)

###  REBOOT######


export XAUTHORITY=/var/run/lightdm/root/:0
export DISPLAY=:0

export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100

nvidia-settings -a [gpu:0]/GpuPowerMizerMode=1
nvidia-settings -a /GpuPowerMizerMode=1
nvidia-settings -a /GPUMemoryTransferRateOffset[3]=1200
nvidia-settings -a /GPUGraphicsClockOffset[3]=125


sudo nvidia-smi -pm 1
sudo nvidia-smi -pl 77

ethminer --farm-recheck 2000 -RH -U -S "eu1.ethermine.org:4444" -FS "us1.ethermine.org:4444" -O   oX----adress ethermine----.name of the rig



Nice to meet you

Hi rigmoulin ,

TQ so much for the information.. I will try your recommendation..

Happy Mining... ^_^

[OverEasy]

Can you provide the bash file your using please.
thx

[overcool]

Can you provide the bash file your using please.
thx

Hi OverEasy,

Which Bash Scripts you want?

[OverEasy]

Everything your using.
I have a working Ubuntu 16.04 desktop version running with WiFi.
Basically I was just going to put your bash scripts on my Linux. 
This rig has 5 Nvidia on it. 1060 x 4 and 1070 x 1

I already tested it with latest Ethminer and it runs good.