XMOS - Light Weight Linux Base ETH Mining OS - Optimal for Nvidia GPU V2.0

[overcool]

Everything your using.
I have a working Ubuntu 16.04 desktop version running with WiFi.
Basically I was just going to put your bash scripts on my Linux.  
This rig has 5 Nvidia on it. 1060 x 4 and 1070 x 1

I already tested it with latest Ethminer and it runs good.

Hi, OverEasy,

The Bash Scripts it selfif if just copy over other like that it won't run.

If you already have the Ubuntu Server running, try to install Nvidia driver and the ethminer 1st.
Make sure this 2 is running fine 1st.

New Version of XMOS is coming..    WIth Wife Support

Good Luck ..

Happy Mining...

[OverEasy]

Great that will save me a lot of work

[overcool]

Great that will save me a lot of work

Hi OverEasy ,

Please try out the version 2.0, i already upload to google drive.

It will wifi support for WPA and WAP2 only.

To configure Wifi please follow this step:-

1. sudo nano /etc/network/interfaces
2. Put in your wifi AP Name and Password.
3. Restart the system, it should work.

Happy Mining... ^_^

[OverEasy]

Wifi is working.

I do not understand how to use this build.

Where do I enter pool info?

The setup command does not have a place for stratums

Please help

How to use and configure XMOS

Simple command to configure XMOS:-
1. At terminal type xmosconf - works
2. put in your ETH wallet address - how? what? do I uncomment the # MY_ADDRESS : Your public ethereum address
so it looks like this -  MY_ADDRESS : 0xsomelongaddresshere
or do I do this - MY_ADDRESS= 0xsomelongaddresshere


 
3. put in your Pool address on Pool1 and Pool2. (STRATUM Mode) - These DO NOT EXIST.

[OverEasy]

Going back to Windows until I get more info..

[overcool]

Wifi is working.

I do not understand how to use this build.

Where do I enter pool info?

The setup command does not have a place for stratums

Please help

How to use and configure XMOS

Simple command to configure XMOS:-
1. At terminal type xmosconf - works
2. put in your ETH wallet address - how? what? do I uncomment the # MY_ADDRESS : Your public ethereum address
so it looks like this -  MY_ADDRESS : 0xsomelongaddresshere
or do I do this - MY_ADDRESS= 0xsomelongaddresshere


 
3. put in your Pool address on Pool1 and Pool2. (STRATUM Mode) - These DO NOT EXIST.

https://s1.postimg.org/6gedlmdj33/xmos.jpg

Hi OverEasy,

Just put in ur ETH wallet address to the MY_ADDRESS, Primary Pool address to pool1, and backup pool address to pool 2, that all, restart the system it should work...

[OverEasy]

Am i blind???
There is no pool1 and pool2 fields to enter anything into

[overcool]

Am i blind???
There is no pool1 and pool2 fields to enter anything into

Hi OverEasy,

Use arrow key go down a bit then you can see it...  Or using Pg up or Pg down key...

^_^

[OverEasy]

Obviously I'm a Windows guy lol....Forgot Nano not as user friendly as notepad.

I will try again

Thank you

[OverEasy]

well i'm closer now.
set it up but miner went to asia ethermine instead of my address dwarfpool.
Re-checking all

[OverEasy]

Nope don't get it.
Can't mine on Dwarfpool.
How to use Dwarfpool?

I have only 1 pool not 4.

http://eth-us.dwarfpool.com:80
http://eth-us2.dwarfpool.com:80 (failover)

Where do I put these> pool 1 and 2 or pool 3 and 4

Stratum enabled or disabled?

Just not happening. Back to Windows again...sigh

[overcool]

Nope don't get it.
Can't mine on Dwarfpool.
How to use Dwarfpool?

I have only 1 pool not 4.

http://eth-us.dwarfpool.com:80
http://eth-us2.dwarfpool.com:80 (failover)

Where do I put these> pool 1 and 2 or pool 3 and 4

Stratum enabled or disabled?

Just not happening. Back to Windows again...sigh

Just put pool1 and pool2 and stratum proxy disable. Save and reboot, it should working fine,
If you really want to try up the stratum proxy, just repeats put pool1 address to pool3 and pool2 to pool4, stratum enable, save and restart it should work.

[car1999]

looks great, I'll try it.

[OverEasy]

Nope don't get it.
Can't mine on Dwarfpool.
How to use Dwarfpool?

I have only 1 pool not 4.

http://eth-us.dwarfpool.com:80
http://eth-us2.dwarfpool.com:80 (failover)

Where do I put these> pool 1 and 2 or pool 3 and 4

Stratum enabled or disabled?

Just not happening. Back to Windows again...sigh

Just put pool1 and pool2 and stratum proxy disable. Save and reboot, it should working fine,
If you really want to try up the stratum proxy, just repeats put pool1 address to pool3 and pool2 to pool4, stratum enable, save and restart it should work.

That's exactly what I did. Lots of errors and no mining. I'll try again later and get some screenshots for you.
Thanks

[OverEasy]

I'm sure I am doing something retarded but here it is -

[overcool]

I'm sure I am doing something retarded but here it is -

https://s1.postimg.org/4hb1lwxyu7/xmos_config.jpg

https://s1.postimg.org/4egygj7ekv/xmos_results.jpg

STRATUMPROXY="disable"
if  dwarfpool STRATUMPROXY is enable, pls take out the -RH options.

pls try to disable the  dwarfpool STRATUMPROXY, ethminer got build-in stratum proxy as well, it work great also..

just 3 step:-

Put in ur wallet address
put in ur pool address
save and restart.

If still cannot, maybe you need to re-image the pen-drive.

Happy Mining.. ^_^

[OverEasy]

Doesnt it need the -F -G command?

NVm just tried adding -F -G and same error as below.

A little closer now

[overcool]

Doesnt it need the -F -G command?

A little closer now

https://s1.postimg.org/5mj539z4wv/xmos_connect.jpg

-F options is slow.

pls set ur Pool address collectly.

Example for Dwrafpool:-
POOL1="eth-eu.dwarfpool.com:8008"
POOL2="eth-us.dwarfpool.com:8008"


You can have look on here:-
https://dwarfpool.com/eth

[OverEasy]

No 8080 is wrong unless I want that proxy thing.

I thing I found the problem in startmine.sh -

I also found a typo.

Let me test my changes and I will report

BTW I have 7 other miners all on Ethminer / Windows.

[OverEasy]

I need to stop now. Lost a lot of hashing time on this.
As it is today this build will not mine on Dwarfpool
You have "." instead of "/"
You have typo for $My_Rig
And from what I can see the entire sections for enable and disable are backwards for Dwarfpool.
And something is very wrong concerning the proper switches for Dwarfpool (-F -G works on 8 rigs but not this build)

I suggest modifying this script further to accommodate multiple pools instead of just one.

I'm sure you can work it out or I might try later to change it.

In the meanwhile its back to Windows for me. 

Good luck