overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 13, 2017, 04:43:31 PM |
|
I need to stop now. Lost a lot of hashing time on this. As it is today this build will not mine on Dwarfpool You have "." instead of "/" You have typo for $My_Rig And from what I can see the entire sections for enable and disable are backwards for Dwarfpool. And something is very wrong concerning the proper switches for Dwarfpool (-F -G works on 8 rigs but not this build) I suggest modifying this script further to accommodate multiple pools instead of just one. I'm sure you can work it out or I might try later to change it. In the meanwhile its back to Windows for me. Good luck Hi OverEasy, TQ for the recommendation, I will have a look on it. By the way, Here the screen capture that I using XMOS V2.0 Mining on Dwarfpool using "Stratum Proxy v0.0.5 by dwarfpool" setting STRATUMPROXY="enable". Just to share out. https://imgur.com/a/pHutgHappy Mining...
|
|
|
|
|
|
|
|
|
The Bitcoin network protocol was designed to be extremely flexible. It can be used to create timed transactions, escrow transactions, multi-signature transactions, etc. The current features of the client only hint at what will be possible in the future.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
OverEasy
|
|
October 13, 2017, 07:17:17 PM |
|
Ok I built another USB drive and started over. This cannot be done. Please show me your WORKING setup file and your WORKING startmine.sh file I have tried every conceivable combination of addresses and commands. When I use stratum enabled this is my error -
|
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 14, 2017, 05:38:27 PM |
|
Hi My setting is like this:- maybe you can have try STRATUMPROXY="enable" POOL1="eth-sg.dwarfpool.com:8008" POOL2="eth-us.dwarfpool.com:8008" POOL3="eth-eu.dwarfpool.com:8008" POOL4="eth-hk.dwarfpool.com:8008" Happy Mining ... ^_^
|
|
|
|
OverEasy
|
|
October 14, 2017, 08:30:09 PM |
|
Hi My setting is like this:- maybe you can have try STRATUMPROXY="enable" POOL1="eth-sg.dwarfpool.com:8008" POOL2="eth-us.dwarfpool.com:8008" POOL3="eth-eu.dwarfpool.com:8008" POOL4="eth-hk.dwarfpool.com:8008" Happy Mining ... ^_^ Tried it. Same error. Cant connect to proxy
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 15, 2017, 10:17:20 AM |
|
Hi My setting is like this:- maybe you can have try STRATUMPROXY="enable" POOL1="eth-sg.dwarfpool.com:8008" POOL2="eth-us.dwarfpool.com:8008" POOL3="eth-eu.dwarfpool.com:8008" POOL4="eth-hk.dwarfpool.com:8008" Happy Mining ... ^_^ Tried it. Same error. Cant connect to proxy ^_^ Really cant help you any more...
|
|
|
|
OverEasy
|
|
October 15, 2017, 10:53:59 AM |
|
Ok thanks. Something very wrong with this build.
Good luck fixing it.
My time is done with it.
|
|
|
|
|
exciter.0
Newbie
Offline
Activity: 10
Merit: 0
|
|
October 21, 2017, 01:06:53 AM |
|
Very nice distro, saves a lot of time from having to do my own headless install. My issue is that for some reason, it detects 4 GPUs but only 3 are mining...any idea? #10.2.92.186 [33.52Mh/s] [/home/prospector ]# glist GPU 0: Quadro M6000 (UUID: GPU-9afd3026-18b6-974d-7469-5ecec5168e6a) GPU 1: GeForce GTX 970 (UUID: GPU-faecce86-6f48-4fea-db8c-be1d7ebd034a) GPU 2: GeForce GTX 980 (UUID: GPU-81c29d17-20db-9eaf-a7d9-f1384de47a0f) GPU 3: GeForce GTX 980 (UUID: GPU-0608d3f8-77c1-ff0e-e3bf-b21239aa65f3) #10.2.92.186 [33.52Mh/s] [/home/prospector ]# gstatus CPU TEMP:- 36 System Uptime:- 29 minutes Nvidia_GPU:-3 AMD_GPU:-0 GPUS Installed:- 4 Pcs name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz] Quadro M6000, 141.73 W, 90 %, 57, 1059 MHz, 3304 MHz GeForce GTX 970, 133.44 W, 90 %, 44, 1231 MHz, 3004 MHz GeForce GTX 980, 127.88 W, 90 %, 42, 1254 MHz, 3004 MHz GeForce GTX 980, 49.78 W, 90 %, 36, 1036 MHz, 3758 MHz
#10.2.92.186 [33.28Mh/s] [/home/prospector ]# cat runlog/totalgpus.txt TOTALGPUS=4 NGPU=4 AGPU=0 CUDAGPU=3 OPENCLGPU=0 MININGGPU=3
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 21, 2017, 04:03:28 AM |
|
Very nice distro, saves a lot of time from having to do my own headless install. My issue is that for some reason, it detects 4 GPUs but only 3 are mining...any idea? #10.2.92.186 [33.52Mh/s] [/home/prospector ]# glist GPU 0: Quadro M6000 (UUID: GPU-9afd3026-18b6-974d-7469-5ecec5168e6a) GPU 1: GeForce GTX 970 (UUID: GPU-faecce86-6f48-4fea-db8c-be1d7ebd034a) GPU 2: GeForce GTX 980 (UUID: GPU-81c29d17-20db-9eaf-a7d9-f1384de47a0f) GPU 3: GeForce GTX 980 (UUID: GPU-0608d3f8-77c1-ff0e-e3bf-b21239aa65f3) #10.2.92.186 [33.52Mh/s] [/home/prospector ]# gstatus CPU TEMP:- 36 System Uptime:- 29 minutes Nvidia_GPU:-3 AMD_GPU:-0 GPUS Installed:- 4 Pcs name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz] Quadro M6000, 141.73 W, 90 %, 57, 1059 MHz, 3304 MHz GeForce GTX 970, 133.44 W, 90 %, 44, 1231 MHz, 3004 MHz GeForce GTX 980, 127.88 W, 90 %, 42, 1254 MHz, 3004 MHz GeForce GTX 980, 49.78 W, 90 %, 36, 1036 MHz, 3758 MHz
#10.2.92.186 [33.28Mh/s] [/home/prospector ]# cat runlog/totalgpus.txt TOTALGPUS=4 NGPU=4 AGPU=0 CUDAGPU=3 OPENCLGPU=0 MININGGPU=3
Have you find out which GPU is not mining..? if try out this command if all the Nvidia GPU:- ~/ethereum-mining/ethminer/build/ethminer/ethminer -U --list-devices Happy Mining .. ^_^
|
|
|
|
Kompik
|
|
November 20, 2017, 09:16:32 PM |
|
I got it working, but only getting 27 with 1070 after overclocking, that seems really slow compared to what i get in windows 31MH+ . Is that normal?
|
Bitrated user: Kompik.
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
November 21, 2017, 03:02:54 AM |
|
I got it working, but only getting 27 with 1070 after overclocking, that seems really slow compared to what i get in windows 31MH+ . Is that normal? For 1070 try to overclock your memory to 4400MHz. Here ex:- NV_WATT="105" NV_CLOCK="-100" NV_MEM="1200" NV_FAN="88" Then you will see the gstatus output:- name, power.draw [W], fan.speed [%], temperature.gpu, clocks.current.video [MHz], clocks.current.memory [MHz] GeForce GTX 1070, 105.54 W, 88 %, 52, 1341 MHz, 4404 MHz GeForce GTX 1070, 105.86 W, 88 %, 53, 1354 MHz, 4404 MHz Happy Mining... ^_^
|
|
|
|
kentan
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 01, 2017, 02:44:12 AM Last edit: December 01, 2017, 03:27:29 AM by kentan |
|
Hi overcool,
Thanks for all your hard work on this. Just gave it a test run. It seems to have problems connecting to asia1.ethermine.org. Unable to resolve hostname . It connects and then says disconnected. Not too sure whether it is ethermine pool, ethminer or a problem with ubuntu dns or networking itself. Its only by luck that after several tries, it connects. It also failover to the us1/2 servers sometimes so the connection seems kinda unstable.
Also some of my 1060 cards are giving low hashrates of around 17/18Mh/s whilst others are at 22Mh/s. I tried bumping up the mem overclock but the max I get is around 19. Is it a gpu issue?
Anything I can tweak in the settings which can help? Many thanks !
|
|
|
|
fruitmint
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 02, 2017, 08:54:04 PM |
|
Hi Great distro.. I mining about 2 months without any issues after i found correct oc levels. So easy mining Now i would like to go ETH+DCR, just cannot figure out how... so it start dual mine after bootup. Another issue with ETH+DCR when i killall mining prosesses and manually start ETH+DCR, all dcr shares rejected. Any idea where to look for that rejecting? tq for good work
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
December 04, 2017, 06:40:00 PM |
|
Hi Great distro.. I mining about 2 months without any issues after i found correct oc levels. So easy mining Now i would like to go ETH+DCR, just cannot figure out how... so it start dual mine after bootup. Another issue with ETH+DCR when i killall mining prosesses and manually start ETH+DCR, all dcr shares rejected. Any idea where to look for that rejecting? tq for good work TQ very give me a try... Dual Mining still not inside in my work scope yet... I will update on main page if XMOS support dual mining..
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
December 04, 2017, 06:43:16 PM |
|
Hi overcool,
Thanks for all your hard work on this. Just gave it a test run. It seems to have problems connecting to asia1.ethermine.org. Unable to resolve hostname . It connects and then says disconnected. Not too sure whether it is ethermine pool, ethminer or a problem with ubuntu dns or networking itself. Its only by luck that after several tries, it connects. It also failover to the us1/2 servers sometimes so the connection seems kinda unstable.
Also some of my 1060 cards are giving low hashrates of around 17/18Mh/s whilst others are at 22Mh/s. I tried bumping up the mem overclock but the max I get is around 19. Is it a gpu issue?
Anything I can tweak in the settings which can help? Many thanks !
Hi Kentan, I also mining on asia1.ethermine.org also, i dont have any network issue. For OC setting each card is different, having to slowly find out the optimal setting. If u are running on mix GPU, u can try OC options "3" . ALl GPU using different OC setting. Happy Mining... ^_^
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
December 12, 2017, 07:16:41 AM |
|
Will this work with Nvidia and AMD mixed RIG . Also Nvidia OC will work with p106-100 Cards ?? .
Thanks
Hi, it was not recommend to use on mix GPU, but can try. I have new version that support P106, but not public yet.. Happy Mining...
|
|
|
|
themacks
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 18, 2017, 06:47:27 PM |
|
Hi OverCool
I really like the simplicity of XMOS. It worked straight away - no fuss.
Any chance you're working on duplicating an XMOS for Z/ZenCash ?
|
|
|
|
taterbum
Newbie
Offline
Activity: 5
Merit: 0
|
|
December 20, 2017, 04:16:27 AM |
|
Hi Overcool, This is exactly what I'm looking for as a Windows guy looking to shed Win10 and get into Linux. I applogies in advance for the stupid questions My main issue right now is I'm getting: Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon It doesn't seem to matter what I enter in the fields below, I get invalid argument. I even used my pools donate wallet address and got the same bang. My_Rig="" My_Address="" Any help would rock Thanks a million, Tate
|
|
|
|
overcool (OP)
Newbie
Offline
Activity: 63
Merit: 0
|
|
December 20, 2017, 05:07:03 PM |
|
Hi Overcool, This is exactly what I'm looking for as a Windows guy looking to shed Win10 and get into Linux. I applogies in advance for the stupid questions My main issue right now is I'm getting: Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon Invalid argument: 0x68BC2D6914B2EDF33495063B74a6D99cBB5945DB.fishon It doesn't seem to matter what I enter in the fields below, I get invalid argument. I even used my pools donate wallet address and got the same bang. My_Rig="" My_Address="" Any help would rock Thanks a million, Tate hi, My_Rig="" ## PC Name My_Address="" ## Your ETH Address 0x...... pls have a try.. Happy Mining... ^_^
|
|
|
|
|