Gigabyte GA-Z270P-D3 (rev. 1.0) M2>PCIE possible?

[NoOneLt]

Hi everyone,

Thought connecting card through M2>PCIE would be easy, but i can't make it work. What i checked:

1. Checked riser and USB cable, seems to be OK
2. Changed in BIOS max PCIE gen - Gen1 - does not help
3. GPU fine
4. Only thing i can not check is the M2>USB adapter.

Can not find anywhere in BIOS settings for the M2 port, only thing i can find is NVMe setting, but it just says that nothing is connected.

It seems to be possible on Z270 to run card on M2, so either i'am doing something wrong either it is hardware related.

MoBo page: https://www.gigabyte.com/Motherboard/GA-Z270P-D3-rev-10#sp

Thanks in advance!

[NoOneLt]

BUMP, anyone?

[MATHReX]

You can definitely run additional GPU from M2 adapter on your motherboard. The common mistake that I've made all the time have I never screwed down the M2 adapter which caused the pins to not align with M2 slot on the motherboard. It should work or else try another M2 adapter. There is no guarantee that each one will work.

[NoOneLt]

Yeah, i scewed it. Had 2 adapters, though from same batch, now ordered another one.

[it5d0n3d3al]

never got m.2 adapter to work on GA MOBO. On AsRock MOBO it was simple plug and play...

[AZuley]

Yes it is possible and works.
1) check that the pins match on the adapter and the media.
2) Update the BIOS before revision F6a https://www.gigabyte.com/MicroSite/462/images/BIOS-Z270P-D3.zip
3) Set some setting in the BIOS
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step03.jpg
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step04.jpg
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step05.jpg
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step06.jpg

4) Enjoy of working 7 GPUs

[NoOneLt]

Yes it is possible and works.
1) check that the pins match on the adapter and the media.
2) Update the BIOS before revision F6a https://www.gigabyte.com/MicroSite/462/images/BIOS-Z270P-D3.zip
3) Set some setting in the BIOS





4) Enjoy of working 7 GPUs

Thank you so much! Should it work with F5 BIOS? After upgrading to F6 i had boot problems... Had to roll back to F5.

[AZuley]

As I wrote above, 7 cards will work on BIOS F6a. This is a specialized BIOS for mining.
Checked by me personally.
On the F5 worked only 6 cards, no more started either through M2, or through HUB 1 to 3 PCI 1x

[NoOneLt]

Unfortunately still no success, made all settings as written, have latest F6a BIOS, tripple checkd everything. Any card/riser that work in other slot connected into M2 just don't work... Had 2 M2>PCIE, both chippos from China, ordered another model, waiting.

[AZuley]

The situation is that the M2 adapters often do not coincide by the contacts on MB. You need to look carefully at the contacts and see how they coincide with the contacts on the board (from the contacts there are scratches on the adapter). http://picua.org/img/2017-10/08/m7vw8fkeqt3lulf03lz2ol1fc.jpg

You may need to slightly move the adapter to the right or left of the key. It may be necessary to enlarge the hole for the key on the adapter M2.
http://picua.org/img/2017-10/08/7uqihpvdahbgsgwc98wkdvcol.jpg

[NoOneLt]

Yes, it was the adapter, another one worked right out of the box!

Thanks everyone!

[AZuley]

Yes, it was the adapter, another one worked right out of the box!

Thanks everyone!

  You can fix it. Just do what I described and it will work, too.

[yoyoma1]

Hello I've the same problem - same motherboard but the GPU plugged into the M.2 adapter is not detected in windows despite the fan spinning on the GPU? I've updated the bios to the mining version. Any ideas? It seems that it should work.....

[iAndy]

I'm new here. Same problem here with 5x gpu! 4x GTX 1060 3gb and 1x GTX 1060 6GB , i have made all the settings from the pictures above and gpu 1 and gpu 3 does not make all the hashpower but at least I have made all 5 gpus run good.

[po4ka]

Yes it is possible and works.
1) check that the pins match on the adapter and the media.
2) Update the BIOS before revision F6a https://www.gigabyte.com/MicroSite/462/images/BIOS-Z270P-D3.zip
3) Set some setting in the BIOS
...

4) Enjoy of working 7 GPUs

Everything is working fine, thx for sharing. 7x1070ti successfully mining.

[Bimmber]

I`m planning to use both M.2 on My Asus board for gpu`s as well. But can I plug risers in those adaptors or I must plug in card only in them?

[Ultraplex]

Hello. I have same motherboard, I switched two of these, I have the problem with 2nd, pci-e 16x slot... not working for me.
Even if I put graphics card directly into that slot, and put in bios that it's main display, it won't show the display... and will not register it.
I bought two of these mobos thinking that first one had problem with slot but no.
I have 1070 strix. 5 of them working perfectly but the middle big slot no. I thought it was power but no...https://imgur.com/a/4kWxs

See, even I put out from left 1st pci to 2nd, not working.. I tried all combinations and nothing. Does anyone have any idea what it might be?

Before this I used ASROCK h110 all 6 worked fine but mobo died.

I am running.
6x 1070 GTX Strix.
Antec Platinum HCP 1300 W
GA-Z270P-D3
SSD Intel M2 256GB
i7 7700k 4.2ghz
8GB RAM 2400 MHZ


Would like to hear any recommendation what should I do. I wasted kind of another 100e for second one. I was 10000%ish sure that it was PCI slot broken....

Thanks in advance.
Alex.

[gv2mikey]

Yes it is possible and works.
1) check that the pins match on the adapter and the media.
2) Update the BIOS before revision F6a https://www.gigabyte.com/MicroSite/462/images/BIOS-Z270P-D3.zip
3) Set some setting in the BIOS
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step03.jpg
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step04.jpg
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step05.jpg
http://www.gigabyte.ru/microsites/data/148/BIOS-setup-F22_step06.jpg

4) Enjoy of working 7 GPUs

Thank link isnt for the f6a version. Its the f8a version.

[trillobeat]

M2 > pcie works with this board I have been using it with a 1080ti conected to it. The board ran total of 5 cards (3x 1080ti and 2x 1070 with the f6a bios

[Spitshinetommy]

Hi guys, I'm trying to do the very setup. I can only manage 6 cards in any configuration. The M2.0 works and can mine. As soon as I add the 7th card the machine will not boot. It turns off after 1 second of power on.

I'm interested in the BIOS update also but I can not find that exact revision in the official list, any ideas guys?


Any help would be greatly appreciated, I have 7 of these mobo's waiting the receive a 7th card.

Many thanks.