PCI-E 6+2 Pin with 2 Molex Connectors Adaptor New Design + Powered Risers!

[cycloid]

Ok so I noticed that for some reason this cable is impossible to find and after looking around cause I needed it, I decided to make it.


 Right now its a batch of 50 but I will have more in a few weeks.


At this moment I am setting up www.CoinCable.com and will offer this cabe and powered risers, plus dual psu link cables.

For now anyone interested can buy them here, these are my ads on Bitmit with ESCROW

https://www.bitmit.net/en/item/36210-new-desing-pci-e-6-2-power-to-2-molex-cable-all-gpu-compatible

https://www.bitmit.net/en/item/36200-pcie-x1-x16-adapter-extender-cable-w-molex-connector

https://www.bitmit.net/en/item/36209-pcie-x16-to-x16-extender-riser-cable-w-molex-connector

PSU cables I am working on now and will be added in a few days.

[cycloid]

(Reserved for Feedback)

[cycloid]

Update Shipping and Cable Prices 

[ssateneth]

Ummmmmmm I noticed you have four 12v wires instead of 3 coming out of the molex... Please show the wire configuration on the PCI-E plug. This smells like a deathtrap for your power supply/video card (dead shorting, wrong pins)

[Jude Austin]

Ummmmmmm I noticed you have four 12v wires instead of 3 coming out of the molex... Please show the wire configuration on the PCI-E plug. This smells like a deathtrap for your power supply/video card (dead shorting, wrong pins)

He has two wires in one lane on the molex connector to supply the other 2 pins.

[blub]

wouldn't the powered riser need a ground wire too?

[zackclark70]

wouldn't the powered riser need a ground wire too?

lol i was going to say that

[ssateneth]

Ummmmmmm I noticed you have four 12v wires instead of 3 coming out of the molex... Please show the wire configuration on the PCI-E plug. This smells like a deathtrap for your power supply/video card (dead shorting, wrong pins)

He has two wires in one lane on the molex connector to supply the other 2 pins.

... What? This doesn't make sense. What other two pins? The +2 to make it an 8 pin? Those are supposed to be grounds. I still request to see a picture of the  wire colors coming to the 6+2 pin connector.