[ANN][PoS] BitcoinStake - 100% Free Airdrop Distribution

[Trofo]

Just to confirm that I have received payment for Croatian translation of the ANN thread and Whitepaper.

Thanks dev, let me know when website is finished.

[pinball_wizard]

Tonite I will download wallet on my home pc, hope I can join airdrop for member!

[wisdomcn]

wisdomcn
B55cbXsBUbNL9LXSukpjRGTcDE3e7ykAqX

[handsum242]

Newbie only faucet listed ?!! anyway, good luck.

[fpex]

i compile mac wallet you can reach at
https://github.com/sstercan/bitcoinstake/releases/download/0.0.1/BitcoinStake-Qt.zip
after download open terminal and install dependencies with homebrew. if you have not brew you will install it from
https://brew.sh/
for mac wallet try with brew

Code:

brew install berkeley-db4
brew install miniupnpc
brew install boost
brew install qt

Okay it seems we have 2 compiles of Mac's that are not verified yet.

I have added both to front page of ANN

I have a compiled  static in Mac, the one above do not work (at least for me).

[Zero1One0]

Sent PM to join airdrop. Thanks!

[lonelykid1984]

i compile mac wallet you can reach at
https://github.com/sstercan/bitcoinstake/releases/download/0.0.1/BitcoinStake-Qt.zip
after download open terminal and install dependencies with homebrew. if you have not brew you will install it from
https://brew.sh/
for mac wallet try with brew

Code:

brew install berkeley-db4
brew install miniupnpc
brew install boost
brew install qt

Okay it seems we have 2 compiles of Mac's that are not verified yet.

I have added both to front page of ANN

I have a compiled  static in Mac, the one above do not work (at least for me).

You mean the one from sstercan doesn't work? How about my version? If it work/doesn't work for you, Could you post an image? You don't need to install any dependency package as it should be self-contained.

[fpex]

i compile mac wallet you can reach at
https://github.com/sstercan/bitcoinstake/releases/download/0.0.1/BitcoinStake-Qt.zip
after download open terminal and install dependencies with homebrew. if you have not brew you will install it from
https://brew.sh/
for mac wallet try with brew

Code:

brew install berkeley-db4
brew install miniupnpc
brew install boost
brew install qt

Okay it seems we have 2 compiles of Mac's that are not verified yet.

I have added both to front page of ANN

I have a compiled  static in Mac, the one above do not work (at least for me).

You mean the one from sstercan doesn't work? How about my version? If it work/doesn't work for you, Could you post an image? You don't need to install any dependency package as it should be self-contained.

I can t post now but the Mac displays windows indicating the app cannot work because of a an error

[lonelykid1984]

i compile mac wallet you can reach at
https://github.com/sstercan/bitcoinstake/releases/download/0.0.1/BitcoinStake-Qt.zip
after download open terminal and install dependencies with homebrew. if you have not brew you will install it from
https://brew.sh/
for mac wallet try with brew

Code:

brew install berkeley-db4
brew install miniupnpc
brew install boost
brew install qt

Okay it seems we have 2 compiles of Mac's that are not verified yet.

I have added both to front page of ANN

I have a compiled  static in Mac, the one above do not work (at least for me).

You mean the one from sstercan doesn't work? How about my version? If it work/doesn't work for you, Could you post an image? You don't need to install any dependency package as it should be self-contained.

I can t post now but the Mac displays windows indicating the app cannot work because of a an error

what's the error message?

[fpex]

i compile mac wallet you can reach at
https://github.com/sstercan/bitcoinstake/releases/download/0.0.1/BitcoinStake-Qt.zip
after download open terminal and install dependencies with homebrew. if you have not brew you will install it from
https://brew.sh/
for mac wallet try with brew

Code:

brew install berkeley-db4
brew install miniupnpc
brew install boost
brew install qt

Okay it seems we have 2 compiles of Mac's that are not verified yet.

I have added both to front page of ANN

I have a compiled  static in Mac, the one above do not work (at least for me).

You mean the one from sstercan doesn't work? How about my version? If it work/doesn't work for you, Could you post an image? You don't need to install any dependency package as it should be self-contained.

I can t post now but the Mac displays windows indicating the app cannot work because of a an error

what's the error message?

I am at work, my Mac is at home

[jukKas]

I got my precious BitcoinStake tokens, thanks dev!

This is interesting concept and I hope this will be success!

[Zeppelins]

Joined airdrop, I hope you will succeed. Thanks and good luck! What the exchange plans to exit?

[madzarux]

Such an interesting project, wish Newbies could have participated as well.

[Buchi-88]

Raspberry Pi wallet has been released,  for those who needed it, please test it and make sure it works, before I release the bounty to cbtc.

PM me or post here on this thread to confirm it does work!

Hello the wallet doesn't run by my pi...



I don't know why my mistake?

When i compile the wallet from the GitHub:

Code:

# Install dependencies
sudo apt-get update
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2sudo apt-get update

# set the swap space on sd-card to 2 GB (the amount of physical memory is insufficient)
sudo su -c 'echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile'
sudo dphys-swapfile setup
sudo dphys-swapfile swapon

# Get Solariscoin sources from github and compile it
cd /home/pi
git clone https://github.com/BitcoinStakeGroup/bitcoinstake
cd bitcoinstake

# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform

# Now we can build the BitcoinStake-QT binary ...
qmake
make # compile.. this will take ages, wait patiently ;)

# to run it simply type "./bitcoinstake-qt" to a terminal
# or create a link to the binary in the start-menu / on the desktop

# Data (Blockchain and wallet.dat) is saved to ~/.bitcoinstake

I have this error? Anyone have a solution?



When i delete the whole directory i have the same error...

THX

Wallet tested on ubuntu Mate for Raspberry Pi: https://ubuntu-mate.org/download/
But install this and try again:

sudo apt-get install build-essential
sudo apt-get install libssl-dev
sudo apt-get install libdb++-dev
sudo apt-get install libboost-all-dev
sudo apt-get install libqrencode-dev

THX, i will test it today

Hi sorry to say but after the installs, the same error....



regards

[AnTaVi]

joined for air drop

[cbtc]

Raspberry Pi wallet has been released,  for those who needed it, please test it and make sure it works, before I release the bounty to cbtc.

PM me or post here on this thread to confirm it does work!

Hello the wallet doesn't run by my pi...



I don't know why my mistake?

When i compile the wallet from the GitHub:

Code:

# Install dependencies
sudo apt-get update
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2sudo apt-get update

# set the swap space on sd-card to 2 GB (the amount of physical memory is insufficient)
sudo su -c 'echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile'
sudo dphys-swapfile setup
sudo dphys-swapfile swapon

# Get Solariscoin sources from github and compile it
cd /home/pi
git clone https://github.com/BitcoinStakeGroup/bitcoinstake
cd bitcoinstake

# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform

# Now we can build the BitcoinStake-QT binary ...
qmake
make # compile.. this will take ages, wait patiently ;)

# to run it simply type "./bitcoinstake-qt" to a terminal
# or create a link to the binary in the start-menu / on the desktop

# Data (Blockchain and wallet.dat) is saved to ~/.bitcoinstake

I have this error? Anyone have a solution?



When i delete the whole directory i have the same error...

THX

Wallet tested on ubuntu Mate for Raspberry Pi: https://ubuntu-mate.org/download/
But install this and try again:

sudo apt-get install build-essential
sudo apt-get install libssl-dev
sudo apt-get install libdb++-dev
sudo apt-get install libboost-all-dev
sudo apt-get install libqrencode-dev

THX, i will test it today

Hi sorry to say but after the installs, the same error....



regards

Use Ubuntu Mate for Raspberry Pi

What S.O are you using?

Regards!

[Avugara]

tanks i got the airdrop

[kl0ndike]

i compile mac wallet you can reach at
https://github.com/sstercan/bitcoinstake/releases/download/0.0.1/BitcoinStake-Qt.zip
after download open terminal and install dependencies with homebrew. if you have not brew you will install it from
https://brew.sh/
for mac wallet try with brew

Code:

brew install berkeley-db4
brew install miniupnpc
brew install boost
brew install qt

Okay it seems we have 2 compiles of Mac's that are not verified yet.

I have added both to front page of ANN

Both Mac apps crash immediately upon launch in OS 10.12.6.  Here's the crash report from one.

Process:               BitcoinStake-Qt [9062]
Path:                  /Applications/BitcoinStake-Qt.app/Contents/MacOS/BitcoinStake-Qt
Identifier:            com.yourcompany.BitcoinStake-Qt
Version:               0
Code Type:             X86-64 (Native)
Parent Process:         [1]
Responsible:           BitcoinStake-Qt [9062]
User ID:               502

Date/Time:             2017-10-06 08:00:12.376 -0400
OS Version:            Mac OS X 10.12.6 (16G29)
Report Version:        12
Anonymous UUID:        12812055-811A-DD2F-EC5A-234554525367

Sleep/Wake UUID:       03701083-3869-4492-BBE9-F5C9424EDDBB

Time Awake Since Boot: 1300000 seconds
Time Since Wake:       340000 seconds

System Integrity Protection: enabled

Crashed Thread:        0

Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    DYLD, [0x1] Library missing

Application Specific Information:
dyld: launch, loading dependent libraries

Dyld Error Message:
  Library not loaded: @rpath/QtCore.framework/Versions/5/QtCore
  Referenced from: /Applications/BitcoinStake-Qt.app/Contents/MacOS/BitcoinStake-Qt
  Reason: image not found

Binary Images:
       0x1063ce000 -        0x106a0708f +com.yourcompany.BitcoinStake-Qt (0) <1A510BF3-CC00-34B1-B02E-CC1C4CB6EA87> /Applications/BitcoinStake-Qt.app/Contents/MacOS/BitcoinStake-Qt
       0x112f04000 -        0x112f41dc7  dyld (433.5) <322C06B7-8878-311D-888C-C8FD2CA96FF3> /usr/lib/dyld

[Buchi-88]

Raspberry Pi wallet has been released,  for those who needed it, please test it and make sure it works, before I release the bounty to cbtc.

PM me or post here on this thread to confirm it does work!

Hello the wallet doesn't run by my pi...



I don't know why my mistake?

When i compile the wallet from the GitHub:

Code:

# Install dependencies
sudo apt-get update
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2sudo apt-get update

# set the swap space on sd-card to 2 GB (the amount of physical memory is insufficient)
sudo su -c 'echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile'
sudo dphys-swapfile setup
sudo dphys-swapfile swapon

# Get Solariscoin sources from github and compile it
cd /home/pi
git clone https://github.com/BitcoinStakeGroup/bitcoinstake
cd bitcoinstake

# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform

# Now we can build the BitcoinStake-QT binary ...
qmake
make # compile.. this will take ages, wait patiently ;)

# to run it simply type "./bitcoinstake-qt" to a terminal
# or create a link to the binary in the start-menu / on the desktop

# Data (Blockchain and wallet.dat) is saved to ~/.bitcoinstake

I have this error? Anyone have a solution?



When i delete the whole directory i have the same error...

THX

Wallet tested on ubuntu Mate for Raspberry Pi: https://ubuntu-mate.org/download/
But install this and try again:

sudo apt-get install build-essential
sudo apt-get install libssl-dev
sudo apt-get install libdb++-dev
sudo apt-get install libboost-all-dev
sudo apt-get install libqrencode-dev

THX, i will test it today

Hi sorry to say but after the installs, the same error....



regards

Use Ubuntu Mate for Raspberry Pi

Wich S.O are you using?

Regards!

Hi i using the Raspian from here:

https://www.raspberrypi.org/downloads/raspbian/

Quote
Raspbian Stretch with desktop

regards

[lahje]

im interested in participating!