Mining Ethereum on rx 580

[happywilli]

Hello,

I'm currently mining ethereum on 3x MSI RX580 8GB xgaming. I've been mining for about 2-3 weeks I want to know if Im on the right way - Am I on a good pool according the picture? Do I have good Temp/MH/s on each card or can I still mod it to get higher. Are my settings on techpowerup good?
Please come with feedback if you feel that i should maybe go for another altcoin or if I should try to modd my GPU's more
https://imgur.com/Plv0qbP
https://imgur.com/hKA9KnA

Thanks!

[1715584737]

1715584737

[1715584737]

1715584737

[MATHReX]

Hello,

I'm currently mining ethereum on 3x MSI RX580 8GB xgaming. I've been mining for about 2-3 weeks I want to know if Im on the right way - Am I on a good pool according the picture? Do I have good Temp/MH/s on each card or can I still mod it to get higher. Are my settings on techpowerup good?
Please come with feedback if you feel that i should maybe go for another altcoin or if I should try to modd my GPU's more
https://imgur.com/Plv0qbP
https://imgur.com/hKA9KnA

Thanks!

That's a really good hash rate output and stability is on point. Temps are very comfortable.
Some improvement proposals:
1) Try undervolting core/mem. From your GPU-z screenshot, I'm seeing 117W power draw. That's too much. I'm running my Sapphire's with 80W TDP and getting the same results.
2) Set your fan speed to a constant value such as 30% or whatever you see fit by using "-tt" command in your bat file. A constant fan speed is better than a variable fan speed.
3) Give dual mining a try, with these temps you can easily push them to dual mine and generate 1.25x coins. Give SIA or DCR a consideration for the second coin.

[happywilli]

Hello,

I'm currently mining ethereum on 3x MSI RX580 8GB xgaming. I've been mining for about 2-3 weeks I want to know if Im on the right way - Am I on a good pool according the picture? Do I have good Temp/MH/s on each card or can I still mod it to get higher. Are my settings on techpowerup good?
Please come with feedback if you feel that i should maybe go for another altcoin or if I should try to modd my GPU's more
https://imgur.com/Plv0qbP
https://imgur.com/hKA9KnA

Thanks!

That's a really good hash rate output and stability is on point. Temps are very comfortable.
Some improvement proposals:
1) Try undervolting core/mem. From your GPU-z screenshot, I'm seeing 117W power draw. That's too much. I'm running my Sapphire's with 80W TDP and getting the same results.
2) Set your fan speed to a constant value such as 30% or whatever you see fit by using "-tt" command in your bat file. A constant fan speed is better than a variable fan speed.
3) Give dual mining a try, with these temps you can easily push them to dual mine and generate 1.25x coins. Give SIA or DCR a consideration for the second coin.

Hey Buddy,

Thank you for replying on my thread.
1. How can I undervolt it to 80 without losing hash rate? this is my current mod
https://imgur.com/a/uOeVi


2. This is my current bat file, where should add the -tt command to run in 30% constant value in bat file?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x7d3Df6A7654339871411b9704921F4d18C8Cdd0F.cash -epsw x -dpool dcr.suprnova.cc:3252 -dwal x -dpsw x -allpools 1

with DCR + ETH

I currently have 147W when i do both dcr and eth.

[happywilli]

Hello,

I'm currently mining ethereum on 3x MSI RX580 8GB xgaming. I've been mining for about 2-3 weeks I want to know if Im on the right way - Am I on a good pool according the picture? Do I have good Temp/MH/s on each card or can I still mod it to get higher. Are my settings on techpowerup good?
Please come with feedback if you feel that i should maybe go for another altcoin or if I should try to modd my GPU's more
https://imgur.com/Plv0qbP
https://imgur.com/hKA9KnA

Thanks!

That's a really good hash rate output and stability is on point. Temps are very comfortable.
Some improvement proposals:
1) Try undervolting core/mem. From your GPU-z screenshot, I'm seeing 117W power draw. That's too much. I'm running my Sapphire's with 80W TDP and getting the same results.
2) Set your fan speed to a constant value such as 30% or whatever you see fit by using "-tt" command in your bat file. A constant fan speed is better than a variable fan speed.
3) Give dual mining a try, with these temps you can easily push them to dual mine and generate 1.25x coins. Give SIA or DCR a consideration for the second coin.

Hey Buddy,

Thank you for replying on my thread.
1. How can I undervolt it to 80 without losing hash rate? this is my current mod
https://imgur.com/a/uOeVi


2. This is my current bat file, where should add the -tt command to run in 30% constant value in bat file?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x7d3Df6A7654339871411b9704921F4d18C8Cdd0F.cash -epsw x -dpool dcr.suprnova.cc:3252 -dwal x -dpsw x -allpools 1

with DCR + ETH

I currently have 147W when i do both dcr and eth.

When I compare the tempurate, GPU0 have 56C and the other 2 have 65/63C do you know why?

[MATHReX]

Hey Buddy,

Thank you for replying on my thread.
1. How can I undervolt it to 80 without losing hash rate? this is my current mod
https://imgur.com/a/uOeVi


2. This is my current bat file, where should add the -tt command to run in 30% constant value in bat file?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x7d3Df6A7654339871411b9704921F4d18C8Cdd0F.cash -epsw x -dpool dcr.suprnova.cc:3252 -dwal x -dpsw x -allpools 1

with DCR + ETH

I currently have 147W when i do both dcr and eth.

No need to add -allpools 1. Remove it! Moreover, I've replied to your PM for the further details.

When I compare the tempurate, GPU0 have 56C and the other 2 have 65/63C do you know why?

GPU0 may have a better airflow to it compared to GPU1 & GPU2. No worries, they are still in good temps! As soon as you start undervolting them, your temps will go down too.