Pippuz96 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 11, 2017, 10:09:15 AM |
|
Hi everyone, Today for the second time my rig stop working due to burning of risers sata cable. I'm still new in mining, My rig has Galax Gtx 1060 OC x4 8 GB ram PSU Corsair hx1200i Motherboard ASRock H81 PRO BTC R2
I'm using ethos my card are working at 22.5mh/s each, usually they are stable but after few days the sata cable that give power to riser get burned. I'm using only one sata cable with 4 connection at the moment. Should i Just connect only 1/2 GPU to each sata cable?
Thank for your help
|
|
|
|
Mini_Miner
Member
Offline
Activity: 228
Merit: 10
|
|
October 11, 2017, 10:18:58 AM |
|
If the cable is burned, then it is too much electrical load. You should study the technical characteristics of your cable. In any case, the cable and connection should not get too hot.
|
|
|
|
l1xx
Member
Offline
Activity: 115
Merit: 10
|
|
October 11, 2017, 10:25:37 AM |
|
Hi everyone, Today for the second time my rig stop working due to burning of risers sata cable. I'm still new in mining, My rig has Galax Gtx 1060 OC x4 8 GB ram PSU Corsair hx1200i Motherboard ASRock H81 PRO BTC R2
I'm using ethos my card are working at 22.5mh/s each, usually they are stable but after few days the sata cable that give power to riser get burned. I'm using only one sata cable with 4 connection at the moment. Should i Just connect only 1/2 GPU to each sata cable?
Thank for your help
you connect 4 risers at 1 cable? Huh, you are just asking for trouble. SATA max load is around 50W, so its just not safe you connect more than one riser per sata cable. Some even recommend to avoid using sata cables entirely.
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
October 11, 2017, 10:28:49 AM |
|
I'm using only one sata cable with 4 connection at the moment.
Are you out of your mind? Thank the gods you are not burned alive yet. Sata cable is for maximum 2 cards and that is too much, preferred is one per card.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
Sev18
|
|
October 11, 2017, 10:29:28 AM |
|
Connect 4 GPUs on one cable -> 100% catching fire!
|
■■■■■■■ Multi-Algo Switching Manager - MULTIPOOL MULTIALGO Profit Switch Launcher ■■■■■■■
|
|
|
shibob
Full Member
Offline
Activity: 672
Merit: 154
Blockchain Evangelist.
|
|
October 11, 2017, 11:45:53 AM |
|
You should connect 1 SATA cable for maximum 2 risers, connecting to only 1 riser is the best. 4 risers on 1 sata, the loading current is too much!
|
|
|
|
Pippuz96 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 11, 2017, 11:50:25 AM |
|
Thank you for your reply! i'm using the Corsair hx1200i but now al my sata cable are burnt can i use other sata cable from other psu?
thanks for your help
|
|
|
|
Mini_Miner
Member
Offline
Activity: 228
Merit: 10
|
|
October 11, 2017, 11:57:29 AM |
|
You should connect 1 SATA cable for maximum 2 risers, connecting to only 1 riser is the best. 4 risers on 1 sata, the loading current is too much!
What about Molex? How many gtx 1070 should be connect for one cable? May be enough to monitor the temperature of the cable?
|
|
|
|
leowonderful
Legendary
Offline
Activity: 1624
Merit: 1130
Bitcoin FTW!
|
|
October 11, 2017, 12:00:44 PM |
|
SATA is capable of supplying some good amounts of power but it sounds like your cables are too low AWG to actually take the load. I’d try buying some PCIE plug risers and seeing if those work. Molex could also work, but watch out for risers with cheap parts and construction.
I recommend one GPU per SATA cable. Those things are not made for high power use cases at all and PCI express plugs are what you want 99% of the time.
|
|
|
|
dagarair
|
|
October 11, 2017, 12:05:42 PM |
|
Yep no more that 2 risers per cable. Everyone here has probably learned the hard way...
|
|
|
|
|
TheCarm
|
|
October 11, 2017, 12:25:43 PM |
|
If you used 4 powered riser for feeds 1 sata socket, Is it burned? this normally and so dangerously. 2POWER RİSER -> 1SATA this is a normal and safety
|
|
|
|
Pippuz96 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 11, 2017, 12:33:40 PM |
|
Thank for your reply I think I will remember forever. Now I don't have any sata cable left my question is where can I buy more? Should I buy from Corsair ? My PSU is hx1200i
|
|
|
|
dagarair
|
|
October 11, 2017, 12:43:16 PM |
|
ebay
maybe amazon
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8587
'The right to privacy matters'
|
|
October 11, 2017, 12:45:05 PM Last edit: October 11, 2017, 01:24:39 PM by philipma1957 |
|
Hi everyone, Today for the second time my rig stop working due to burning of risers sata cable. I'm still new in mining, My rig has Galax Gtx 1060 OC x4 8 GB ram PSU Corsair hx1200i Motherboard ASRock H81 PRO BTC R2
I'm using ethos my card are working at 22.5mh/s each, usually they are stable but after few days the sata cable that give power to riser get burned. I'm using only one sata cable with 4 connection at the moment. Should i Just connect only 1/2 GPU to each sata cable?
Thank for your help
you put four gpus on the cable you melted the cable. And you ask if you should put less gpus. The answer is yes put less gpus 1 or 2 max. Go to the corsair website they have the exact cable you need http://www.corsair.com/en-us/ribbon-style-sata-cable-with-4-connectors-type-3-short-cablehttp://www.corsair.com/en-us/ribbon-style-sata-cable-with-4-connectors-type-3-850mmContents and Specifications Package contents One (1) "Ribbon Style" SATA Cable with 4 Connectors, Type 3 (700mm) Compatibility: Compatible with all Corsair Type 3 pin out PSU: AXi, HXi, HX, RMi, RMx, RM, SF, TXM, CSM, CXM 90 percent sure these are what you want. you can ask the forum http://forum.corsair.com/v3/index.phpor you can ask jonnyguru forum http://www.jonnyguru.com/forums/1 or 2 gpus at the most.
|
|
|
|
sohard4me
Member
Offline
Activity: 125
Merit: 10
|
|
October 11, 2017, 01:27:40 PM |
|
yeah, 1 or 2 gpu max per sata cable
|
|
|
|
sc0rp1on
Newbie
Offline
Activity: 81
Merit: 0
|
|
October 11, 2017, 01:34:13 PM |
|
I have experienced this. Follow the rule of one card one cable and you will never face this issue again!
|
|
|
|
Oakey22
|
|
October 11, 2017, 02:12:25 PM |
|
I use sata for 2 cards max. Any more and you are asking for trouble
|
|
|
|
Falmant
Newbie
Offline
Activity: 37
Merit: 0
|
|
October 11, 2017, 02:12:37 PM |
|
I'm using only one sata cable with 4 connection at the moment.
Are you out of your mind? Thank the gods you are not burned alive yet. Sata cable is for maximum 2 cards and that is too much, preferred is one per card. For the AMD 7970 or R9 390, it can supply up to three. But for the modern cards, it can only supply 1 to 2 cards.
|
|
|
|
makomako
Full Member
Offline
Activity: 210
Merit: 100
altcom Aa4DWXQjrcEA8gPBLkx6t9VgCuWoCo1myE
|
|
October 11, 2017, 02:45:00 PM |
|
also make sure that the cable/psu that your using is true rated and don't overload your cables man
|
|
|
|
|